similar to: tinc doesn't find tap device / windows 10 x64

Sehr geehrte Damen und Herren, Ab dem 23.12.2016 bis einschließlich 06.01.2017 sind wir im Weihnachtsurlaub. Ab dem 09.01.2017 stehen wir Ihnen wieder wie gewohnt zur Verfügung. Wir wünschen Ihnen und Ihrer Familie ein frohes und gesegnetes Weihnachtsfest und einen Guten Rutsch ins neue Jahr. Mit freundlichen Grüßen Ihr Hardy Barth - Team EDV- u. Elektrotechnik Hardy Barth GmbH

Okay, the jist of this whole thing, I get this infamous (?) problem, I have been trying to search though the archives of samba-general on gmane and also in my archive of this list. I have only seen requests for the magical answer. Environment: W2K/W2K3 mixed ADS going Native ADS only soon. Samba 3.0.4 compiled from source on a RHEL AS30 machine. MIT Kerberos v1.3.4 also compiled from source.

Hi, All Due to some routing rotation purpose, I use crontab to add below info: 0 * * * * echo Subnet = 54.169.128.0/17 >> /etc/tinc/myvpn/hosts/aws_sgp 0 * * * * echo Subnet = 54.169.0.0/17 >> /etc/tinc/myvpn/hosts/aws_sgp 1 * * * * /usr/sbin/tincd -n myvpn -k 1 * * * * /usr/sbin/tincd -n myvpn --debug=3 30 * * * * sed -i '/54.169.128.0\/17/d' /etc/tinc/myvpn/hosts/aws_sgp

-----Original Message----- From: VR-Bug Support Sent: 15 October 2003 13:42 To: 'Gavin Davenport' Subject: RE: [Samba] Re: domain groups accessing samba share Hi Gavin, This is what I have for my /etc/pam.d/login #%PAM-1.0 auth required pam_securetty.so auth sufficient /lib/security/pam_winbind.so auth sufficient /lib/security/pam_unix.so nodelay

I followed Marks SNMP howto on Voip Magazine and ran into a small problem... (http://www.voip-magazine.com/content/view/2877/0/1/3/) When asterisk is running as a non-root user (asterisk) SNMP request for for the Asterisk MIB tree return nothing. If I quit asterisk and run it as root, all is fine. Does anyone have a idea what is going on? I have never used agentX, so I am unsure of what it is

Hi ! I want to setup tinc 1.0 pre4 with kernel 2.4.5 I didn't find information about settings of tun/tap device I did in kernel - [*] Prompt for development and/or incomplete code/drivers Network device support <M> Universal TUN/TAP device driver support in /etc/modules.conf - alias char-major-10-200 tun mknod -m 600 /dev/tun c 10 200 chown 0.0 /dev/tun In mailing list archive I

Dear, all. I am pulling my hair because I could not find any error messsages that could point me to a fix to my problem. The directory I want to share was mounted on /home with drbd and heartbeat but then my users could not access any shares / their home directories. However, if I set up shares else where on my box like share under /opt or /usr/local, then the same users would be able to access

Hi, I''m writing puppet modules since a couple of weeks now, so I''m still considering myself as a new comer in this field. It seems that modules I can find on the web or the recipe page on the wiki almost all use a design pattern where the module is shipped in one or several class(es) whose configuration are determined by "global" or nodes variables ala: module: class

On 26/01/16 09:13, Guus Sliepen wrote: > On Tue, Jan 26, 2016 at 07:25:55AM +0000, mlist wrote: I will not > add this feature to tinc. You can easily do this yourself by adding > these environment variables to a separate file, and sourcing it in > the scripts that tinc calls. For example: Does tinc clear the environment before calling the scripts? Or can you just define the

Hi! I have updated our server from Samba 4 alpha 17 to Samba 4.0.1. Everything seems to work fine after some reconfiguration, but our GPOs are not working anymore. Samba 4 alpha 17 was using ntvfs and the root partition with the sysvol share was mounted with "user_xattr" only in /etc/fstab. Samba 4.0.1 is now set to use s3fs and the root partition is mouted with

I have a bunch of Debian stretch machines with systemd where I find that tinc starts too early during boot, and fails to work. Typically it is running, but printing out Apr 14 00:53:41 db7 tinc[3077]: Can't write to Linux tun/tap device (tun mode) /dev/net/tun: Input/output error regularly. Unfortunately because it is running systemd does not restart it, even though it's not actually

I'm so close I can feel it :-) I'm having a problem connecting users to their home directories. Under "My Network Places" on XP clients I can see my Samba file server ("Hobbes") just fine. When I double click on it to open it, I get a login/password prompt that I can't bypass even though I try logins/passwords that exist on the ADS server and/or the UNIX accounts.

It is possible for tinc to made a persistent tun/tap or can I configure a persistent tun/tap by hand and tell to tinc to use that virtual interface device without starting up/shutting down tun/tap at every tincd start/stop ? Roberto -------------- parte successiva -------------- Un allegato HTML ? stato rimosso... URL:

Has anyone tried to use tinc on a Windows 8.1 system? I just did it and noticed, that I am unable to start the service. _c:Program Files (x86)tinctincd -n vpn tinc.vpn service installed tinc.vpn se_rvice started .. will create and start the service, but not really. The servic exists, but can not be started. If I start the service manually, I got the following message (translated literally):

Hello, I just would like to know if tinc runs stable on a vista box? I 'm sure that question has been asked before but I did not find it on "The tinc Archives". So maybe someone has some experience and can give a hint or advice. Thank you Mit freundlichen Gr??en/ best regards Horst Neumann, NBCon GmbH Tel: +49 (212) 54 81 10 Fax: +49 (212) 254 21 54 Mobil: +49 (172) 687 43 01

I have a tinc mesh consisting of 6 Windows servers. All are configured identically and all but one work without any problems. On that one server however the tinc service starts, but the connection does not come up (no packets get routed, ping times out). If I stop and start the service manually, the connection is up in like half a second. If I start tinc on the command line, it works every time.

Hello, i have observed a Bug in Graph Dump (think). tinc build fine Graph dumps. Inside the dump is a tinc node which no longer tinc used. Connection not inside of dump for this node. This tinc network is used for backbone network in Chemnitz, Germany. We use tinc Versions 1.0.14 and 1.0.13 on PC (Linux) and router (OpenWrt). In the attachment is the graph dump. On this dump is name of node

It would be nice if in a next tinc release you'll add some service variables tinc propagates to its scripts. So for example you can define in tinc.conf env variables like: SERVICE1= ... SERVICEn= and tinc will propagates all SERVICEx Variables found in tinc.conf to all scripts it calls. One can use theoretically infinite Env Var for custom behavior (like custom debug messages, conditional

I have about 15 nodes running 1.1pre15 connected and running quite well. I don't remember why I installed 1.1preX originally. Possibly because I added a router with custom firmware to the network (Tomato Shibby firmware for my ASUS router) which included 1.1pre14. Now I'm trying to add an Openwrt device and it includes 1.0.33 only. This will replace the Tomato Shibby device with

Hey John, I've been working on this most the day. Just can't seem to nail it down! (Yes sir I did read the "How To") Winbind is working fine - I can: wbinfo -g wbinfo -u getent passwd getent group Problem is when I try to use a domain group on a Samba share I get a username and password prompt; although, nothing seems to get me in! Please advise #Samba 3.0 running under