similar to: Tinc 1.0.26 on Mac OS X

Hi Maxim, I'm having the same result, though I got some more output with debug level 5; it's definitely failing to create the specified tincdev0 network device. Is there something I need to change on OS X to enable that? See: $ sudo tincd -D -c /etc/tinc/robotvpn -d tincd 1.0.26 (Nov 2 2015 06:12:50) starting, debug level 1 /dev/tap0 is a Generic BSD tap device ifconfig: interface

Hi Maxim, Not much to it: avahi-autoipd -D $INTERFACE # ifconfig $INTERFACE 169.254.45.23 netmask 255.255.0.0 up ip route add 172.20.0.0/16 dev $INTERFACE Mac OS X doesn't have "ip" by default, so I also installed the Homebrew package "iproute2mac", which provides an emulation of "ip" on top of the legacy ifconfig/route calls. The commented-out ifconfig

Ah, fantastic. With the following config I get a usable tap0: $ sudo cat /etc/tinc/robotvpn/tinc.conf Name = elendur Mode = switch AddressFamily = ipv4 Device = /dev/tap0 Compression = 1 ConnectTo = robot_ph_cpe22_04 Still need to figure out the Avahi side of things for name resolution, but thanks all! On 26 February 2016 at 11:04, Guus Sliepen <guus at tinc-vpn.org> wrote: > On Thu,

Lets view your tinc.conf On February 26, 2016 6:41:30 PM GMT+03:00, Mike Purvis <mpurvis at clearpathrobotics.com> wrote: >Hi Maxim, > >I'm having the same result, though I got some more output with debug >level >5; it's definitely failing to create the specified tincdev0 network >device. >Is there something I need to change on OS X to enable that? See: >

Mike, you can use ifconfig, it should work fine. It can be something like this: #!/bin/sh ifconfig $INTERFACE 172.20.0.1 netmask 255.255.0.0 It no need to add up at the end of ifconfig string. And "ip route" can be skipped too. On Fri, Feb 26, 2016 at 5:23 PM, Mike Purvis <mpurvis at clearpathrobotics.com> wrote: > Hi Maxim, > > > Not much to it: > >

Hi. May you show your tinc-up script? And subnet-up, host-up if you have they at all. On February 25, 2016 9:55:59 PM GMT+03:00, Mike Purvis <mpurvis at clearpathrobotics.com> wrote: >Hey all, > >I'm trying to use tinc 1.0.26 from Homebrew on Mac OS X 10.10.5, and >having >some trouble. Is anyone successfully doing this? > >Here's my config: > >$ sudo cat

On Thu, Feb 25, 2016 at 01:55:59PM -0500, Mike Purvis wrote: > Here's my config: > > $ sudo cat /etc/tinc/robotvpn/tinc.conf [...] > Interface = tincdev0 [...] > Error while writing to Generic BSD tap device /dev/tap0: Input/output error Unfortunately, on Mac OS X, tinc cannot change the name of the interface. It's probably just tap0. Tinc should've warned about this,

Hello all - I've just recently been exploring R for the first time. After noticing a few things that have changed from S to R, I started looking for an R-S compatibility table but didn't find it. Is such a table out there ? Where ? Thanks much, Purvis Bedenbaugh purvis at mbi.ufl.edu Examples: 'stdev' is now 'sd' - is it exactly the same computation ? couldn't find

Got the following error running the latest yum update, any thoughts? useradd: invalid numeric argument 'avahi-autoipd' error: %pre(NetworkManager-0.7.0-4.el5_3.i386) scriptlet failed, exit status 3 error: install: %pre scriptlet failed (2), skipping NetworkManager-0.7.0-4.el5_3 Brian

Hi All, Looking for some guidance on debugging and also reporting a bug. First off I can't seem to find any information on reproducing the ubuntu 16.04 build with debug symbols, I do have a core file I'd like to introspect to potentially provide a patch. Secondly the bug report itself: I am receiving a segfault signal 11 when one or more machines share a *Address* specific IP. For

We are running tinc (v. 1.0.26) in switch mode with bmx6 (another mesh protocol) running on top of the tap0 interface on about 25 devices. The asymmetric routing of UDP packets is causing my firewall and I presume others to drop some of the packets, since there are no outbound SYN packets originating from the device running tinc. Is there any way to mitigate this issue besides enabling tcponly

On Fri, 2 Mar 2018 16:15:43 +0100 Claudio Nicora <claudio.nicora at gmail.com> wrote: > > > Is bind9 running during the join ? > > How have you set up bind ? > No it's not. > Following the doc here > https://wiki.samba.org/index.php/BIND9_DLZ_DNS_Back_End > I see than the needed files (like /var/lib/samba/private/named.conf > and

Hi, everyone -- I downloaded puppet and have been playing with it. I''m using the RPM''s for RHE4 created by David (mentioned on the install page: http://people.redhat.com/dlutter/yum/rhel4/) with RHE''s ruby 1.8.1-7: ruby-1.8.1-7.EL4.8 ruby-libs-1.8.1-7.EL4.8 ruby-devel-1.8.1-7.EL4.8 I''m sure this is an easy one; all the same, I''m stumped. Please

Hello! What is exactly "tap0" in the host ifconfig? Thank you! _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

On Sun, 11 Jun 2000, David Summers wrote: > Thanks for the great software package! The question I have is this: Thank you :) > My goal is to set up a triangle topology VPN between three sites and run > OSPF routing on all the sites so that if a link goes down between any two > sites the OSPF routing will reroute the packets that used to go between > the sites A <-> B to A

Hello list, Please don''t shoot me. I know I''m doing something with bonding that bonding wasn''t made for. I just want to give it a try. I want a simple mechanism to have a failover on a 24Mbit line to a 2Mbit line in case the 24Mbit line goes down. Between A and B there are two lines: a 24Mbit and a 2Mbit. I use two OpenVPN tunnels with tap devices: +-- tap0 (A)---

Hi, Host A has two interfaces: eth0, tap0. I want that all locally generated traffic from user 1004 goes through tap0. This is what I did: iptables -A OUTPUT -t mangle -m owner --uid-owner 1004 -j MARK --set-mark 2 echo 202 bigmac.out >> /etc/iproute2/rt_tables ip rule add fwmark 2 table bigmac.out ip route add default via 10.0.0.1 dev tap0 table bigmac.out ip route flush cache

Hello there, I was hoping that maybe one of you guys could help me out with a problem I'm experiencing with tinc1.0pre7. First, I'll start with my configuration, after that I'll explain my problem. Background ---------- This is a simple, client-server situation on a private network. Both machines run the same Debian Woody 3.0 testing installation and both have identical packages

Hi Ivo and Guus, We are writing a book on building VPNs for Linux and a part of it describes tinc. I wanted to make sure that your opinion, as tinc authors and developers, is reflected. First, let me ask a couple of technical questions. 1. If there are two hosts, foo and bar, that are to be connected via tinc, and each host should only have _one_ IP address (i.e. nmask is /32), would the

Hi Guys, I want to create multiple virtual interfaces on a system running linux 2.6. The main requirment being, to assign unique MAC address fo each of the virtual interfaces. I need to know, if this is possible and will really appriciate if someone can provide me pointer in this direction. Thanks a lot. R. Singh _______________________________________________ LARTC mailing list