similar to: tinc 1.1~pre11-1 (autostart)

systemctl enable tincd at NETNAME systemctl: command not found Please help? Regards Yazeed Fataar <yazeedfataar at hotmail.com> On Mon, Feb 8, 2016 at 7:30 AM, Maxim Vorontsov <6012030 at gmail.com> wrote: > systemctl enable tincd at NETNAME for example > > -- > brgds > Max > On Feb 8, 2016 12:15 AM, Yazeed Fataar <yazeedfataar at gmail.com> wrote: >

http://bfy.tw/48zr -- brgds Max On Feb 8, 2016 7:39 AM, Yazeed Fataar <yazeedfataar at gmail.com> wrote: Im running ubuntu 14.04. Regards Yazeed Fataar On Mon, Feb 8, 2016 at 7:35 AM, Yazeed Fataar <yazeedfataar at gmail.com> wrote: systemctl enable tincd at NETNAME systemctl: command not found Please help? Regards Yazeed Fataar On Mon, Feb 8, 2016 at 7:30 AM, Maxim

Hi Maxim See below. root at OpenWrt:/etc/tinc/acmevpn# modprobe -v tun -ash: modprobe: not found root at OpenWrt:/etc/tinc/acmevpn# lsmod tun Module Size Used by Not tainted crc_ccitt 928 0 root at OpenWrt:/etc/tinc/acmevpn# uname -a Linux OpenWrt 2.6.31.10 #1 Tue Jul 23 14:34:17 CEST 2013 mips GNU/Linux root at OpenWrt:/etc/tinc/acmevpn# opkg info

Forget about tinc. I won't work until you solve issue with your kernel. On Tue, Jan 19, 2016 at 9:45 PM, Yazeed Fataar <yazeedfataar at gmail.com> wrote: > this is what happens when I try to run tincd > > root at OpenWrt:/etc/tinc/vpn# tincd -n vpn -D -d5 > > tincd 1.0.21 (Mar 9 2014 18:26:59) starting, debug level 5 > > Could not open /dev/net/tun: No such file

You can find tinc package in openwrt repo and install it with opkg or luci. I suggest you first run couple of tinc nodes on x86, just to understand how it works. -- brgds Max On Jan 19, 2016 7:17 PM, Yazeed Fataar <yazeedfataar at gmail.com> wrote: Any help please? Regards Yazeed Fataar On Mon, Jan 18, 2016 at 3:39 PM, Yazeed Fataar <yazeedfataar at gmail.com> wrote: Thanks

LOL .... thanks Maxim. I understand how to do it in Ubuntu , just not sure the correct syntax to put. Regards Yazeed Fataar <yazeedfataar at hotmail.com> On Mon, Feb 8, 2016 at 7:54 AM, Maxim Vorontsov <6012030 at gmail.com> wrote: > http://bfy.tw/48zr > > -- > brgds > Max > On Feb 8, 2016 7:39 AM, Yazeed Fataar <yazeedfataar at gmail.com> wrote: > >

Thanks Graham Please excuse me as I am a noob in linux . I have come across this link through searches. I just dont know how to start... Do I "wget http://www.tinc-vpn.org/packages/tinc-1.0.26.tar.gz" to openwrt vm and then how do I compile it in openwrt? <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail> This

On 19/01/16 17:31, Yazeed Fataar wrote: > Hi Graham > > Regarding the tun lib , see mine. > > root at OpenWrt:~# /lib/modules/3.3.8/tun.ko But didn't one of your earlier mails say that tun did not appear in your lsmod output? If the module is there but not loaded, why don't you just "insmod" it? I am confused. Sorry, I can't help further. I have told

Im running ubuntu 14.04. Regards Yazeed Fataar <yazeedfataar at hotmail.com> On Mon, Feb 8, 2016 at 7:35 AM, Yazeed Fataar <yazeedfataar at gmail.com> wrote: > systemctl enable tincd at NETNAME > > systemctl: command not found > > Please help? > > Regards > Yazeed Fataar > <yazeedfataar at hotmail.com> > > On Mon, Feb 8, 2016 at 7:30 AM, Maxim

On 19/01/16 18:25, Maxim Vorontsov wrote: > Yazeed, your tun.ko for 3.3.8. Which kernel do you use? > Show your "uname -a". By the way, 3.3.8 seems very old for an OpenWrt kernel. The router I am running tinc on has 3.8.10 and is several years old. I built that image myself but it was based on Barrier Breaker r36499. You may want to find a more recent build -- for example a

systemctl enable tincd at NETNAME for example -- brgds Max On Feb 8, 2016 12:15 AM, Yazeed Fataar <yazeedfataar at gmail.com> wrote: Hi I started setting up tinc 1.1 and it works great. only thing is I am not able to configure it to autostart. How is this done in 1.1? I used to use nets.boot file to get it running. Regards -------------- next part -------------- An HTML attachment

Thank you Guillermo. I will give it a go and revert back with my results. Regards Yazeed Fataar <yazeedfataar at hotmail.com> On Mon, Feb 13, 2017 at 2:26 PM, Guillermo Bisheimer < gbisheimer at bys-control.com.ar> wrote: > Hi Yazeed, > > You have to add this to tinc.conf > > TunnelServer = yes > > Otherwise tinc will manage package routing internally. Then you

Hi Can someone please help me with the method of installing the lzo dependancy for tinc to compile. I am getting the following errors when compiling. ./configure .... .... checking for lzo1x_1_compress in -llzo2... no checking for lzo1x_1_compress in -llzo... no configure: error: "lzo libraries not found." Regards Yazeed Fataar <yazeedfataar at hotmail.com> --------------

Hi I am testing running tinc in switch mode. , my topology is as follows Site 1 (tinc-srv01) -> Site 2 (tinc-srv02) I have configured the bridge interfaces with ip addresses and able to ping between bridges. I then setup a server on each site and tested layer 2 connectivity between the two servers. Topology as follows. Server 1 - *Site 1* (tinc-srv01) -> *Site 2* (tinc-srv02) - Server 2

Hi Mark Im trying to run this as a metarouter instance in mikrotik. Which build should I use that has tinc pre-built? <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail> This email has been sent from a virus-free computer protected by Avast. www.avast.com

Hi Guys I am wanting to test running tinc in openwrt. I need help on how to run it in openwrt. How do I compile tinc ? Regards Yazeed Fataar <yazeedfataar at hotmail.com> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail> This email has been sent from a virus-free computer protected by Avast. www.avast.com

Hi I have a simple hub and spoke topology where all my nodes connect to a central node. Below is tinc.conf for main node *tinc.conf* Name = main Interface = tun0 Forwarding = kernel and the remote nodes have same with ConnectTo = main. I have tried to apply a basic iptable policy on the main node but the traffic still seems to passthough and the nodes can communicate with each other. How do I

Hi Graham Can you perhaps share with me the mr-mips metarouter image you are using? Regards Yazeed Fataar <yazeedfataar at hotmail.com> On Tue, Jan 19, 2016 at 8:01 PM, Graham Cobb <g+tinc at cobb.uk.net> wrote: > On 19/01/16 03:57, Yazeed Fataar wrote: > > Hi Marek > > > > I managed to setup everything in openwrt. However I am getting errors > > when

Thanks Guus So based of this , having your central tinc server in VPS Provider , will allow potentially the provider to replicate your config files and thus exposing all your remote sites connected. My situation I face is all my remote sites have dynamic addresses ,and in order for me to create a connection point between the sites is to have a central server in cloud with public address. Therefor

Hi I have been testing the "import" function in tinc. It works great however there is one thing I need help doing. When I import the RSA keypairs from multiple devices into a tinc node using the import , the last RSA key pair data is not saved. I only get a blank host file. For example *Hub* :~#Tinc -n <netname> import name = site 1 --- <begin rsa pub key --- --- <end rsa