similar to: Timeout Leak

Greetings to all, I am getting the following error on my PRI-connected Asterisk box, and am just wondering if anyone else has seen this, and if so how they solved it. Jan 18 10:10:23 NOTICE[6070]: chan_zap.c:7428 pri_dchannel: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1 Jan 18 10:10:24 NOTICE[6070]: chan_zap.c:7428 pri_dchannel: PRI got event: HDLC Bad FCS (8) on Primary

Dear List, I'm trying to generate a simple heatmap that has each row and column separated by a black line. However, for some reason this only happens for the first and last color. The middle color in my colorpanel() command has an addition horizontal and vertical line that I would like to get rid off. Any suggestions? #my code below my.matrix <- cbind(func.1 =

Hi everyone, I have a PRI conection on an * system running Asterisk 1.0.9, libpri 1.0.9 and zaptel 1.0.9.2 connected to an AXE 10 (APZ 21220 System 64) in the network side. I know the system and the wildcard I´m using are ok because I´ve used them before with other PRI connections (to a Siemens EWSD) without any problem. First the PRI didn´t work (I got the TE110P alarmed with red). After

Here's what I get: bash-2.02# sshd -ddd -p 1234 debug3: Seeding PRNG from /usr/local/libexec/ssh-rand-helper debug1: sshd version OpenSSH_3.5p1 debug1: private host key: #0 type 0 RSA1 debug3: Not a RSA1 key file /etc/ssh/ssh_host_rsa_key. debug1: read PEM private key done: type RSA debug1: private host key: #1 type 1 RSA debug3: Not a RSA1 key file /etc/ssh/ssh_host_dsa_key. debug1: read PEM

Is this a known issue? (ignore the pervasive MS-outlook capitalization) Ssh-agent /bin/ksh Ssh-add /root/.ssh/id_rsa Blah blah Ssh -vvv some_server date ... debug1: ssh_rsa_verify: signature correct debug1: kex_derive_keys debug1: newkeys: mode 1 debug1: Enabling compression at level 6. debug1: SSH2_MSG_NEWKEYS sent debug1: waiting for SSH2_MSG_NEWKEYS debug1: newkeys: mode 0 debug1:

Hi, I have a running puppetmaster with nginx and passenger and ruby 1.9.2. When i do puppet cert --trace --list . i get the following error. /usr/lib64/ruby/gems/1.9.1/gems/puppet-2.7.9/lib/puppet/application/ cert.rb:43:in `block (2 levels) in <class:Cert>'' /usr/lib64/ruby/gems/1.9.1/gems/puppet-2.7.9/lib/puppet/application.rb: 357:in `block (2 levels) in parse_options''

I'm running 7.0-RELEASE-i386 on Jetway's NC92-N230 mainboard. The board has one integrated RTL8168/8111 gigabit NIC as well as an expansion board with three RTL8168/8111 NICs. Why would the three NICs work while the onboard NIC does not? none2@pci0:1:0:0: class=0x020000 card=0x816810ec chip=0x816810ec rev=0x02 hdr=0x00 vendor = 'Realtek Semiconductor' device

Hi, Suppose my backup server has to copy every day at the end of the night, all files from the Web Server. So every day I will have a script that copies files using SCP. I USE HP-UX . But this script must work without anyone entering passwords. I know that SCP will need Passwords. How can I make a script with this feature ? Using keygen ? If posssible, describe with details how

second time, is there anybody that can tell me where I can send contributions to the man pages? Dom <<small addition to the scp man page>> -------------- next part -------------- An embedded message was scrubbed... From: "Cressatti, Dominique" <Dominique.Cressatti at lansa.co.uk> Subject: small addition to the scp man page Date: Mon, 9 Sep 2002 13:37:41 +0100 Size:

Remote users on external networks unable to connect to the host using F-Secure SSH from their workstations. The Host is installed with openssh-3.4p1 from IBM. Previously the host was installed with F-Secure 1.2.26 and there wasn't any problems. What can we do. I've checked in the sshd_config file and the AllowHosts and Allow Users tags are in there with the host ips and usernames that

We are heading into a lock here. So we need to get people to test their respective platforms if they wish them to be supported out of the tar file. So if you have any patches you need to ensure your platform works speak up. We are looking at a lock on the 17th. I believe I have an AIX/Cray patch and a Tru64 patch sitting in my mailbox that I'll be looking at soon and more than likely

Hi All, I need to parse data from a file, example shown below. The first two lines can be skipped, the third line contains the column names. The next 13 lines can be skipped. The next line "1991" is a year value, with the following 13 values data for that year. The file then repeats this format with (year, 13 lines of data for that year). I would ideally like to end up with an

I have an Asus P5Q-WS running FreeBSD 7 and the onboard Realtek NIC's are not being detected. No Kernel modifications as this is a fresh install. pciconf -lv : re0@pci0:3:0:0: class=0x020000 card=0x82c61043 chip=0x816810ec rev=0x02 hdr=0x00 vendor = 'Realtek Semiconductor' device = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC' class = network

>>>>> "BillC" == wcleveland <wcleveland@pobox.com> >>>>> on Fri, 17 Dec 2004 17:00:06 +0100 (CET) writes: BillC> I loaded the binary for R, and most things work fine. BillC> The plot command defaults to a postscript file. If I BillC> type X11(), I get a message the X11 failed to load. BillC> However if I type

Is it possible to use encryption only for authenticate and then switch to no encryption? I've looked at the code for OpenSSH 3.5p1, cipher.c, and it looks like the answer is no, at least for protocol 1. However, I cannot tell if that is a deliberate design limitation of the implementation or if it is inherent in ssh protocol 2. My dilemma is a customer who wants to use their network IDS

Hello, I think this needs a few more eyes: http://lists.freebsd.org/pipermail/freebsd-scsi/2009-January/003782.html In short, writes are slow, likely do to the write-cache being enabled on the controller. The sysctl used in 6.x to turn the cache off don't seem to be in 7.x. Thanks, Charles ___ Charles Sprickman NetEng/SysAdmin Bway.net - New York's Best Internet - www.bway.net

We have done some benchmarking tests using dovecot 2.0.12 to find the best shared filesystem for hosting many users, here I share with you the results, notice the bad perfomance of all the shared filesystems against the local storage. Is there any specific optimization/tunning on dovecot for use GFS2 on rhel6??, we have configured the director to make the user mailbox persistent in a node, we will

Hi. Solaris packages created by buildpkg.sh don't create privsep user or group and sshd won't start until they are created (or privsep is disabled): ## Executing postinstall script. starting /usr/local/sbin/sshd... Privilege separation user sshd does not exist /etc/init.d/opensshd: Error 255 starting /usr/local/sbin/sshd... bailing. The attached patch (against -cvs) ports the relevant

My BIND9.6.0 on FreeBSD 6.2 works fine when I manually start with: root@ns2# named -4 -S 1024 -c /etc/namedb/named.conf But it won't start on boot and no error messages or log. And it won't start using rndc, it cause error message. Why does the error shows port 953 when I specified for port 53 in the config? rndc: connect failed: 127.0.0.1#953: connection refused Below are

OpenBSD tree is heading into a lock and this includes OpenSSH. So we are winding up for a 3.5 release. If we can get people to test the current snapshots and report any problems that would improve the odds that your platform won't be broke for 3.5. Issues I know off of right now. 1. I can't test NeXT. So I TRULY need someone in that community to test for me. Last I heard there was