similar to: Dovecot 2.2.18.2: Panic: file fs-api.c: line 756 (fs_copy): assertion failed: (src->fs == dest->fs)

Hello everybody, we are using asterisk 16 with a realtime config and have a problem with FOP2. We have developed a webinterface for managing the queues. If we add a member to a queue, everything works fine but the user is not shown in the queue in FOP2 Panel. The problem is that the FOP2 Panel does not receive the QueueMemberAdded Event. This will only be sent if the QueueAdd Function is

These patches are adding support for outputting 2560x1440 at 56 over HDMI. This needs a pixel clock of 225 MHz which was not supported before. This was tested in a dual monitor setup with a GF114 (GTX 560 TI) and one HDMI monitor running with 2560x1440 at 56 and one DVI monitor running with 1920x1200 at 60. This still needs testing on other graphics cards and with dual link DVI. There is no

From: Hauke Mehrtens <hauke at hauke-m.de> Without this patch a pixel clock rate above 165 MHz on a TMDS link is assumed to be dual link. This is true for DVI, but not for HDMI. HDMI supports no dual link, but it supports pixel clock rates above 165 MHz. Only activate Dual Link mode when it is actual possible. Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de> Signed-off-by: Ilia

Am 07.12.18 um 08:10 schrieb Noel Butler: > > On 07/12/2018 16:44, Aki Tuomi wrote: > >> >> On 6.12.2018 6.54, Noel Butler wrote: >>> >>> On 06/12/2018 07:29, Jakobus Sch?rz wrote: >>> >>> ?that all and every Flag is set, except \Seen... I tried to >>> figure out, whats happening here... >>> >>> Paste what

On 12.12.2017 02:59, Jakob Sch?rz wrote: > Hi! > > I have some troubles with the virtual plugin. I run a self-compiled > dovecot 2.2.33.2 from debian testing. I patched this version with the > QRESYNC-Patch from a few weeks ago. > But i always get an errormessage, when i try to open an email from a > virtual mailbox. > > So i cloned the actual git-Repo and compiled

On Tue, Nov 3, 2015 at 7:02 PM, Ben Skeggs <skeggsb at gmail.com> wrote: > On 11/04/2015 08:41 AM, Ilia Mirkin wrote: >> From: Hauke Mehrtens <hauke at hauke-m.de> >> >> Without this patch a pixel clock rate above 165 MHz on a TMDS link is >> assumed to be dual link. This is true for DVI, but not for HDMI. HDMI >> supports no dual link, but it supports

Hi Aki! The config is in the attachment. The output from gdb is this: # gdb /usr/lib/dovecot/imap /var/core/24491 GNU gdb (Debian 8.1-3) 8.1 Copyright (C) 2018 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by

These patches are adding support for outputting 2560x1440 at 56 over HDMI. This needs a pixel clock of 225 MHz which was not supported before. This was tested in a dual monitor setup with a GF114 (GTX 560 TI) and one HDMI monitor running with 2560x1440 at 56 and one DVI monitor running with 1920x1200 at 60. This still needs testing on other graphics cards and with dual link DVI. There is no

This is not a bug in virtual plugin, but in some email which contains invalid unicode sequence somehow. Can you send me a core file? This should not have occured ofc but would be nice to know how it ended up here. Aki > On January 3, 2018 at 5:35 PM Jakobus Sch?rz <wertstoffe at nurfuerspam.de> wrote: > > > Hi there! > > I compiled dovecot 2.3 from git. Because there

Hi! I have some troubles with the virtual plugin. I run a self-compiled dovecot 2.2.33.2 from debian testing. I patched this version with the QRESYNC-Patch from a few weeks ago. But i always get an errormessage, when i try to open an email from a virtual mailbox. So i cloned the actual git-Repo and compiled dovecot and pigonehole-sieve. The problem with the virtual plugin seems gone away. But

Probably better to get the full protocol debug log from the Horde/IMP side. Instructions on how to enable that can be found in imp/config/backends.php. See: https://github.com/horde/imp/blob/master/config/backends.php#L288 rawlog output below only shows what Dovecot is returning - would be more useful to see the entire client round-trip transactions however. > On November 14, 2017 at 4:15

Hi There! I can not find anything about this message: dovecot[23202]: lmtp(jakob): Debug: Mailbox <lmtp DATA>: Opened mail UID=1 because: header Message-ID (Cache file is unusable) dovecot[23202]: lmtp(jakob): Debug: Mailbox <lmtp DATA>: Opened mail UID=1 because: virtual size (Cache file is unusable) And the next is: dovecot[23202]: lmtp(jakob): rphlK01SG1qiWgAAk1Mx3g: sieve:

It seems that horde forgots to re-enable QRESYNC after connection timeout. Regarding the connection timeout, do you see anything in dovecot logs? Aki On 15.11.2017 12:51, Jakob Sch?rz wrote: > Hi there! > > This is the horde-imap. Hope this helps more to find out, what's the > problem with QRESYNC and dovecots virtual-plugin > > ------------------------------ > >>

Hi, did you have time to investigate about 'Panic: file unichar.c' bug ? Because I have the same problem with a 2.3.0 installation without virtual plugin. Thanks, Marco On 2018-01-03 16:52, Aki Tuomi wrote: > This is not a bug in virtual plugin, but in some email which contains invalid unicode sequence somehow. Can you send me a core file? This should not have occured ofc but

Hi there! I splitted my Mailarchiv to an extra namespace. Because i have some Problems with the Archiv. I can open all Folders from Mailarchiv with dovecot. But i want to have a "all archives" Mailbox to search in all messages in only one virtual mailbox. Trying to open this virtual folder from thunderbird, I get in a big archiv this error in logs from dovecot: J?n 12 10:54:41

Hi, we have dovecot-ee-2.2.18.2 and pigeonhole/managesieve 0.4.8 running for some time. Today some users informed us that they did not get mails from one project account forwarded to there personal accounts any more. This worked till one week ago and I cant think of any changes we made... The project account keeps a copy of received mails. I tried two different accounts to configure

Hi there! This is the horde-imap. Hope this helps more to find out, what's the problem with QRESYNC and dovecots virtual-plugin ------------------------------ >> Wed, 15 Nov 2017 08:45:21 +0000 >> Connection to: imap://aldebaran.local/ Server connection took 0,0031 >> seconds. S: * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE XDOVECOT

Greetings, We have many iOS clients, and some report that they?re having problems with iOS mail copying messages to their Sent folder. This happens 2 - 3 times per day, and the phone just says Sending and the client never knows if it sends. Client says apparently email DOES go out, but there is no recording of it. This is usually on our LAN. We?re not sure if this is solved via Postfix or

Hi there! I compiled dovecot 2.3 from git. Because there is already a bug in virtual-plugin, and i hoped, it get fixed... but it doesn't. So this is the error-message from the log J?n 03 16:27:08 aldebaran dovecot[26460]: indexer-worker(jakob)<26476><qQ6g1+BhIJvAqAAO:sjYhMTH2TFpsZwAAk1Mx3g>: Panic: file unichar.c: line 160 (uni_ucs4_to_utf8_c): assertion failed:

Am 20.03.23 um 18:26 schrieb Brendan Braybrook: > check out the imap acl support: > https://doc.dovecot.org/configuration_manual/acl/ > > On 2023-03-20 10:12, R???? P??????? wrote: >> Hello! >> >> We are currently exploring email archiving solutions. Is there a way >> to use an >> IMAP mailbox in read-only / archive mode? The requirement is that