similar to: CESA-2015:2636 Important CentOS 6 kernel Security Update

Send CentOS-announce mailing list submissions to centos-announce at centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request at centos.org You can reach the person managing the list at centos-announce-owner at centos.org When

On Wed, 3 Feb 2016, Warren Young wrote: > On Feb 3, 2016, at 12:24 PM, Max Pyziur <pyz at brama.com> wrote: >> >> When I tried rebooting the machine, none of the kernels would work except for the oldest one. > > Define ?would not work?. Post a photo of the error message somewhere if you can?t describe it better than that. You might have to turn off rhgb mode to get a

Hi, After switching to the 2.6.32-573.22.1.el6.x86_64 kernel (CentOS 6) a few weeks ago I have noticed that my servers are now reporting a much higher idle load. The servers are being monitored with Zabbix, and there is a clear difference between the older kernel 2.6.32-573.12.1 and the newer 2.6.32-573.12.1. I can see the problem on both physical and virtual servers. You can see the Load

I've also had a few Xen systems grub entry issues. I'm not yet sure what triggers the events, but I do think there *may* be a correlation to the "/boot" part. I've found the Xen servers that have "/boot" before any of the the lines like "/boot/xen.gz" ended up missing complete grub entries. Not sure it's 100% true. Anyone else comment? Thanks PJ On

HI, We've started to see several issues with the Xen releases. Going back to basics I've used this guide https://wiki.centos.org/HowTos/Xen/Xen4QuickStart Once the install process is complete the grub.conf looks like this: default=0 timeout=5 splashimage=(hd0,0)/boot/grub/splash.xpm.gz hiddenmenu title CentOS (3.18.21-17.el6.x86_64) root (hd0,0) kernel /boot/xen.gz

I sent this out about a week or so ago, but I have heard nothing. I am *thinking* it is a SELINUX problem, but I cannot figure out what. The SELINUX settings for both machines are *exactly* the same (the stock defaults for a standard CentOS 6 install). The *only* difference is that the desktop (sauron) has a few VMs setup (under KVM) and the laptop (gollum) does not. The desktop has an AMD

On 04/08/2016 06:50 AM, Johnny Carlsen wrote: > Hi, > > After switching to the 2.6.32-573.22.1.el6.x86_64 kernel (CentOS 6) a few weeks ago I have noticed that my servers are now reporting a much higher idle load. > > The servers are being monitored with Zabbix, and there is a clear difference between the older kernel 2.6.32-573.12.1 and the newer 2.6.32-573.12.1. > > I can

On Fri, Apr 8, 2016 at 6:32 AM, Johnny Hughes <johnny at centos.org> wrote: > On 04/08/2016 06:50 AM, Johnny Carlsen wrote: > > Hi, > > > > After switching to the 2.6.32-573.22.1.el6.x86_64 kernel (CentOS 6) a > few weeks ago I have noticed that my servers are now reporting a much > higher idle load. > > > > The servers are being monitored with Zabbix,

At Sat, 13 Feb 2016 10:14:30 -0500 CentOS mailing list <centos at centos.org> wrote: > > I sent this out about a week or so ago, but I have heard nothing. I am > *thinking* it is a SELINUX problem, but I cannot figure out what. The SELINUX > settings for both machines are *exactly* the same (the stock defaults for a > standard CentOS 6 install). The *only* difference is

Greetings, Today, I decided to reboot one of my CentOS machines after it had been running for 219 days. In this time, I had done yum updates several times. When I tried rebooting the machine, none of the kernels would work except for the oldest one. Here are the installed kernels: kernel-2.6.32-504.23.4.el6.x86_64 kernel-2.6.32-573.3.1.el6.x86_64 kernel-2.6.32-573.7.1.el6.x86_64

I have not yet found a USB-to-serial adapter detected as /dev/ttyACM1. Try /dev/ttyUSB0 ? - Mike On Sat, Feb 13, 2016 at 10:14 AM, Robert Heller <heller at deepsoft.com> wrote: > I sent this out about a week or so ago, but I have heard nothing. I am > *thinking* it is a SELINUX problem, but I cannot figure out what. The > SELINUX > settings for both machines are *exactly* the

On Feb 3, 2016, at 17:10, Warren Young wrote: > smartctl can see through several different types of RAID controller to the underlying physical disks via its -d option. This is what I have: # smartctl --all /dev/sda smartctl 5.43 2012-06-30 r3573 [i686-linux-2.6.32-573.12.1.el6.i686] (local build) Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net Vendor:

Hello all, My laptop has Nouveau installed as the graphic driver. The version is 2.6.32-573.12.1.el6.x86_64. And when I tried to run a software(CONVERGE STUDIO), I find such errors: Xlib: extension "GLX" missing on display ":0.0". QGLTempContext: No GL capable X visuals available. Xlib: extension "GLX" missing on display ":0.0". Xlib: extension

Hi IIia, Thank you very much for your help. Does the distro released more recently than Dec 2009 support OPENGL 3.3 ? Best, Yunde ________________________________ From: ibmirkin at gmail.com <ibmirkin at gmail.com> on behalf of Ilia Mirkin <imirkin at alum.mit.edu> Sent: Friday, August 25, 2017 6:27:43 PM To: Su, Yunde Cc: nouveau at lists.freedesktop.org Subject: Re: [Nouveau]

BTW, note that mesa-based drivers don't support above GL 3.0 for compatibility contexts on any hardware. Most reasonable software that requires advanced functionality uses core contexts though. On Sat, Aug 26, 2017 at 10:38 PM, Ilia Mirkin <imirkin at alum.mit.edu> wrote: > Depends on the hardware. You may be interested in looking at >

I have two computers: both running CentOS 6.7, 64-bit, with kernel 2.6.32-573.12.1.el6.x86_64. One is a laptop with an 2 core Intel processor and the other is a desktop machine with a 4 core AMD processor. Both with selinux enabled. I have a USB serial port device (a RR-CirKits LCC-Buffer USB). On the desktop I am getting this error: sauron.deepsoft.com% sudo minicom Device /dev/ttyACM0

There has been a bit of grumbling recently about HP printer capability in one of our smallest prototyping Labs.? We have a single GigE switch connecting a Windows 7 machine and a Dell/CentOS-6 machine.? The CentOS machine also has connectivity via another network.? Currently, only the Windows 7 machine has been setup for printing on our HP OfficeJet 8615. Our Samba effort on the CentOS system has

[please use reply-all to include the list on your response] On Jan 23, 2016, at 11:14 AM, Tim Clarke <tim.clarke at manifest.co.uk> wrote: > > Centos 6.7 > Linux man8.m1.manifest.co.uk 2.6.32-573.12.1.el6.i686 #1 SMP Tue Dec 15 > 18:25:17 UTC 2015 i686 i686 i386 GNU/Linux > > Installed: > nut.i686 2.6.5-2.el6 > @epel

Nouveau was merged upstream into the kernel in 2.6.35 or so. The 2.6.32-based system you have is a franken-kernel maintained by RedHat. You should go to them for support. I'd recommend trying a distro based on a kernel that was released more recently than Dec 2009. On Thu, Aug 24, 2017 at 1:29 PM, Su, Yunde <su.526 at buckeyemail.osu.edu> wrote: > Hello all, > > > My laptop

Depends on the hardware. You may be interested in looking at https://people.freedesktop.org/~imirkin/glxinfo/ for specifics. On Sat, Aug 26, 2017 at 9:42 PM, Su, Yunde <su.526 at buckeyemail.osu.edu> wrote: > Hi IIia, > > > Thank you very much for your help. > > Does the distro released more recently than Dec 2009 support OPENGL 3.3 ? > > > Best, > > Yunde