similar to: Slow terminal response Centos 7.7 1908

Hi Erick, what was the value of 'si' in top ? Best Regards, Strahil Nikolov ?? 3 ??? 2020 ?. 18:48:30 GMT+03:00, Erick Perez - Quadrian Enterprises <eperez at quadrianweb.com> ??????: >It was found that the software NIC team created in Centos was having >issues due to a failing network cable. The team was going berserk with >up/down changes. > > >On Fri, Jul 3,

It was found that the software NIC team created in Centos was having issues due to a failing network cable. The team was going berserk with up/down changes. On Fri, Jul 3, 2020 at 10:12 AM Erick Perez - Quadrian Enterprises < eperez at quadrianweb.com> wrote: > Hey! > I have a strange condition in one of the servers that I don't where to > start looking. > I login to the

I?ve posted this on the forums at https://www.centos.org/forums/viewtopic.php?f=47&t=57926&p=244614#p244614 - posting to the list in the hopes of getting more eyeballs on it. We have a cluster of 23 HP DL380p Gen8 hosts running Kafka. Basic specs: 2x E5-2650 128 GB RAM 12 x 4 TB 7200 RPM SATA drives connected to an HP H220 HBA Dual port 10 GB NIC The drives are configured as one large

Hi. I entered one of our domU tonight and see following problem: # iowait -k 5 avg-cpu: %user %nice %system %iowait %steal %idle 0.00 0.00 0.00 100.00 0.00 0.00 Device: tps kB_read/s kB_wrtn/s kB_read kB_wrtn sda1 0.00 0.00 0.00 0 0 sda2 0.00 0.00 0.00 0

Dear all, I have installed DRBD 8.3.11 compiled from sources. However the backend block will freeze if there is high IO load. I use Remus to support high availability and checkpointing is controlled by remus for each 400ms. If I check the Iostat I got the idle CPU will decreasing extremely each checkpointing and when its reach 0% of idle cpu the local backing device will freeze and damage the

All of our Kafka clusters are fairly write-heavy. The cluster in question is our second-heaviest ? we haven?t yet upgraded the heaviest, due to the issues we?ve been experiencing in this one. Here is an iostat example from a host within the same cluster, but without the RAID check running: [root at r2k1 ~] # iostat -xdmc 1 10 Linux 3.10.0-327.13.1.el7.x86_64 (r2k1) 05/27/16 _x86_64_ (32 CPU)

Hi, I''m trying to convert two ext4 FS to btrfs, but I''m surprised by the time needed to do that conversion. The first FS is on a 500GiB block device, and btrfs-convert is running since more than 48h : root 1978 25.6 47.7 748308 732556 ? D Feb18 944:44 btrfs-convert /dev/vg-backup/backup The second is on a 340GiB block device, and the processing time is similar

On 05/25/2016 09:54 AM, Kelly Lesperance wrote: > What we're seeing is that when the weekly raid-check script executes, performance nose dives, and I/O wait skyrockets. The raid check starts out fairly fast (20000K/sec - the limit that's been set), but then quickly drops down to about 4000K/Sec. dev.raid.speed sysctls are at the defaults: It looks like some pretty heavy writes are

Hi, I have a DELL PE R610 (32GB RAM 2x Six Core CPU and about 1,4 TB RAID 10) running with 20.000 Mailaccounts behind 2 Dovecot IMAP/POP3 Proxies on a Debian Lenny. The Server was running about 1 year without any problems. 15Min Load was between 0,5 and max 8. No high IOWAIT. CPU Idletime about 98%. But since yesterday morning the Systemload on the Server has been increased over 500. I Think

I did some additional testing - I stopped Kafka on the host, and kicked off a disk check, and it ran at the expected speed overnight. I started kafka this morning, and the raid check's speed immediately dropped down to ~2000K/Sec. I then enabled the write-back cache on the drives (hdparm -W1 /dev/sd*). The raid check is now running between 100000K/Sec and 200000K/Sec, and has been for several

Issue: Vista reads slowly from a samba server. This appears to pop up periodically here and elsewhere. My samba.conf file has: [homes] ... vfs objects = readahead As suggested elsewhere. Writes are approximately 17-18MB/s which is acceptable. Reads are in the 8MB/s range which is appalingly slow. Using linux smbclient and windows XP clients I can read at 25+MB/s. I've enabled vfs

Hi, I had been experiencing a problem on our dedicated server running Centos 5, and unable to successfully track down the problem. Since about 6 days ago, I noticed a spike in load/CPU utilization which went from a typical 0.2x-0.3x to 3.x. At the same time, average traffic also went up and so did the log usage. Prior to this, the server was working fine and there had been no changes to the

----- Original Message ----- From: Christian Balzer [mailto:chibi at gol.com] To: dovecot at dovecot.org Cc: 24x7server at 24x7server.net Sent: Fri, 10 Feb 2017 17:58:58 +0900 Subject: On Fri, 10 Feb 2017 01:13:20 +0530 Rajesh M wrote: > hello > > could somebody with experience let me know the dovecot config file settings to handle around 1500 simultaneous connections over pop3 and

Hi, I am trying to bootstrap the difference between each parameters among two non linear regression (distributed loss model) as following: # data.frame > Raies[1:10,] Tps SolA Solb 1 0 32.97 35.92 2 0 32.01 31.35 3 1 21.73 22.03 4 1 23.73 18.53 5 2 19.68 18.28 6 2 18.56 16.79 7 3 18.79 15.61 8 3 17.60 13.43 9 4 14.83 12.76 10 4 17.33 14.91 etc... # non

Hi all, Here are some benchmarks that I''ve done using Xen. However, before I get started, let me explain some of configuration details... Xen Version SPECjbb WebBench Linux Distribution Debian 3.1 HT disabled Linux Kernel 2.6.12.2 Host Patch CK3s Here are the initial benchmarks SPECJBB WebBench 1 Thread 1 Client 2 Clients 4 Clients 8 Clients BOPS TPS TPS TPS TPS Host

Hi all We are implementing samba-ldap to act as an nt pdc and are seeing performance problems. We have a 1ghz, 3gb Ram, 36gb box that is running samba-2.2.5 and openldap-2.0.23 under redhat 7.3 with kernel 2.4.18-3. Clients are all Win2k SP3. All the ldap requests are to the localhost interface. The box is acting as the PDC for the domain, and also sharing diskspace and printers. When we get

I seem to be doing something really stupid or missing something really obvious but what? I have a simple three column data.frame that I would like to reshape to wide preferably using reshape2. An example from http://stackoverflow.com/questions/9617348/reshape-three-column-data-frame-to-matrix looked perfect except I wanted a data frame but it seemed okay. I just changed acast to dcast and it

Dear listers, I am trying to fit a model using nlsList() using alternately a SSfol() selfstart function or its developped equivalent formulae. This preliminary trial works well mydata<-groupedData(Conc~Tps|Organ,data=mydata) mymod1<-nls(Conc~SSfol(Dose,Tps,lKe,lKa,lCl),data=mydata) as well as a developped form: mymod2<-nls(Conc~Dose * exp(lKe+lKa-lCl) *

Hi, I am currently running a 10 Node OCFS2 Cluster (version 1.3.9-0ubuntu1) on Ubuntu Server 8.04 x86_64. Linux n1 2.6.24-24-server #1 SMP Tue Jul 7 19:39:36 UTC 2009 x86_64 GNU/Linux The Cluster is connected to a 1Tera iSCSI Device presented by an IBM 3300 Storage System, running over a 1Gig Network. Mounted on all nodes: /dev/sdc1 on /cfs1 type ocfs2

Thanks for all the helpful responses. I include the data file and the syntax file for reference. Again, if I use the fields function, as is, I get the message: Error in svd(tempM) : error 159 in dsvdc using traceback, I get: > traceback() 4: stop(paste("error ", z$info, " in dsvdc")) 3: svd(tempM) 2: Krig(x, Y, cov.function = rad.cov, m = m, decomp = decomp,