similar to: Recover from an fsck failure

This is CentOS-6x. I have cloned the HDD of a CentOS-6 system. I booted a host with that drive and received the following error: checking filesystems /dev/mapper/vg_voinet01-lv_root: clean, 128491/4096000 files, 1554114/16304000 blocks /dev/sda1: clean, 47/120016 files, 80115/512000 blocks /dev/mapper/vg_voinet01-lv_home: clean, 7429/204800 files, 90039/819200 blocks

Hi > On Thu, May 28, 2020 19:38, Robert Nichols wrote: > >> What output do you get from: >> >> file -s /dev/mapper/vg_voinet01-lv_log >> lsblk -f /dev/mapper/vg_voinet01-lv_log >> > > file -s /dev/mapper/vg_voinet01-lv_log > /dev/mapper/vg_voinet01-lv_log: symbolic link TO '../DM-5' > dm-f > > lsblk -f

I am experimenting with KVM and I wish to create a virtual machine image in a logical volume. I can create the new lv without problem but when I go to format its file system then I get these warnings: Warning: WARNING: the kernel failed to re-read the partition table on /dev/sda (Device or resource busy). As a result, it may not reflect all of your changes until after reboot. Warning: Unable to

CentOS-6.6 virt-manager 0.9.0 I have cloned a template server with a 32GB virtio HDD already defined and am attempting to add additional virtio disks. The basic cloned system boots without error. If I create a virtio disk with 32000/32000 megabytes I can add it and the system reboots; providing that I do not first create a partition: fdisk -l /dev/vg_vhost03/lv_vm_inet11.harte-lyne.ca_03

When I load a blank cd into the optical drive on my CentOS-6.7 workstation I am not getting any window or visible mount action on my Gnome desktop. Formerly, when I mounted a writeable media in this drive on this host I would see a nautilus style file browser window open with inducements to add files. When I visit /mnt I see nothing: ll /mnt total 0 My fstab does not seem to have much to say

I am performing some configuration testing on a kvm host. When installing a guest operating system is it advisable to place each instance in a separate lv or better to accept the default and store them on the root file system? Respecting lvm, does one configure lvs in a virtual server to take space from the main vg or does one allocate lv space from inside that allocated to the virtual instance?

Hello, After repeated failing efforts to restore CentOS 7 backups (taken using mondorescue software), I have found that all my CentOS 7 installations (VMs under KVM) have the same /boot/grub2/device.map, which seemingly refers to two HDs, although the VMs in fact include only one (virtual) HD. For example: /boot/grub2/device.map # this device map was generated by anaconda (hd0)

Hi, I've been receiving message "No space left on device" but there is space. I've forced fsck on reboot 2 times but did not solve. # yum rpmdb: /var/lib/rpm/__db.001: No space left on device error: db4 error(28) from dbenv->open: No space left on device error: cannot open Packages index using db3 - No space left on device (28) error: cannot open Packages database in

Hello, First, sorry for my english. I'm new in this list, and I'm having troubles because a lack of disk on my Raid 5. The server have a LVM system on the Raid 5 and the partitions on LVM is ext3. I can't identify where the ext3 superblock is on this LVM partition to use the fsck. I've tried many ways: fsck -b 8192 /dev/VolGroup/LogVol04 dumpe2fs /dev/VolGroup/LogVol04 | grep

OK todays problem. I have a HP N54L Microserver running centos 6.5. In this box I have a 3x2TB disk raid 5 array, which I am in the process of extending to a 4x2TB raid 5 array. I've added the new disk --> mdadm --add /dev/md0 /dev/sdb And grown the array --> mdadm --grow /dev/md0 --raid-devices=4 Now the problem the resync speed is v slow, it refuses to rise above 5MB, in general

Yes, really. I've got hundreds of the damn things here at home, and I want to go through them and get rid of them all. But... to do that I want to read them. I have both a 5.25" and a 3.5" drive, both are plugged in, but in the BIOS, all I see is the 3.5". Fine, I figure I'll take care of those. Nope. I see /dev/fd0 once I've booted up, but neither konqueror nor

On 4/9/2015 5:22 PM, Chuck Campbell wrote: > Subject says it. > > I would like to find out if I have anything written on the MBR of a > disk in my system /dev/sda, or any other device. > If there is something there, is it readable, or recognizable to humans? the MBR contains both binary boot code, which is not human readable, and the master partiion table for the device. you can

I am running samba-3.0.10-1 on Fedora core 3 compiled with ACL support. I can connect to shares as expected, users in the correct Active Directory groups have access, and the converse. However when I manage the samba server through Windows XP MMC and attempt to change permissions on the security tab of the finance share I get "Access is Denied". Anyone know what I am doing wrong? I

I am reposting since I didn't get any responses the fist time. I am running samba-3.0.10-1 on Fedora core 3 compiled with ACL support. I can connect to shares as expected, users in the correct Active Directory groups have access, and the converse. However when I manage the samba server through Windows XP MMC and attempt to change permissions on the security tab of the finance share I get

Before I'd try to defragment my whole filesystem (see attached mail for whole story) I figured "Let's try it on some file". So I did > xfs_bmap /raid/Temp/someDiskimage.iso [output shows 101 extents and 1 hole] Then I defragmented the file > xfs_fsr /raid/Temp/someDiskimage.iso extents before:101 after:3 DONE > xfs_bmap /raid/Temp/someDiskimage.iso [output shows 3

OS=CentOS-5.2 media=Kingston 512Mb usb key Problem: As 'root', when running a script resident on the external drive mounted at /media/disk I receive the following error: /bin/sh: bad interpreter: Permission denied The meduia is a 512Mb USB key formatted as ext2/3 # ll -rwx------ 1 root root 28 Jul 2 17:30 hello.sh # cat hello.sh #!/bin/sh echo Hello World! # which sh /bin/sh I

I am building a mailserver and with all the steps, I want to image the drive at various 'checkpoints' so I can go back and redo from a particular point. The image is currently only 4GB on a 120GB drive. Fdisk reports: Disk /dev/sdb: 111.8 GiB, 120034124288 bytes, 234441649 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size

Hello All, I have installed Oracle Cluster Manager on linux x86-64 nit. I am using ocfs file system for quorum file. But I am getting following error. Please see ocfs configureation below. I would appreciate, if someone could help me to understand if I am doing something wrong. Thanks in advance. --------------------------------------------------cm.log file ---------------------------- oracm,

Subject says it. I would like to find out if I have anything written on the MBR of a disk in my system /dev/sda, or any other device. If there is something there, is it readable, or recognizable to humans? thanks, -chuck

Sat, 19 Jul 2014 15:03:03 -0400 I am not sure exactly where the problem is here. I am using a sieve script that sorts various incoming messages into their own mailbox. MS Outlook does not show those folders if they are not directly under INBOX. EXAMPLE: drwx------ 31 vmail vmail 1.0K 2014-07-19 14:46:55 EDT ./ drwx------ 3 vmail vmail 512B 2014-07-02 13:52:03 EDT ../ drwx------ 5