similar to: Xorg on CentOS

From dmesg after the crash. Xorg[12774] general protection rip:2b3daaff218b rsp:7fff01440950 error:0 Anyone experiencing X11 crashes? I have an amd 6400+ centos 5.1 x86_64. This typically happens when I VNC in from home into my machine at work. My machine has nvidia card and I do run the binary drivers. However, I switched out for a short time and ran the nv driver and it happens there also.

I found this site https://www.linux-hardware.org/index.php?id=pci:8086-3185-8086-2212 Says the Intel UHD 605 graphics chip is supported in kernel > 4.11 centos 8 comes with 4.18 but I am not getting X on CentOS 8 with this chip. When I put this: Section "Device" Identifier "Intel Graphics" Driver "intel" EndSection in /etc/X11/xorg.conf.d it does not

I installed the elrepo kmod-nvidia and also the nvidia-detect and modules (see below). I had X working with the 3.10 from Centos - but video was freezing. SO I thought I would try the elrepo kernel. I installed that and X does not come up? How do I re-make the nvidia module for 4.14.5 kernel? I want to make sure the kmod kernel did it. I 'm thinking it did not. lspci | grep VGA says

I am getting the following error on yum update. What do I do??? I have the ATI display driver package installed. --------------------------------------------- Running Transaction Test Finished Transaction Test Transaction Check Error: file /usr/X11R6/lib/libGL.so.1.2 from install of xorg-x11-Mesa -libGL-6.8.2-1.EL.13.37 conflicts with file from package fglrx64_6_8_0-8.16.20-1 file

C7: lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation Device 3185 (rev 03) grep Driver /var/log/Xorg.0.log [ 24.374] (**) | |-->Device "Intel Graphics" [ 24.610] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: [ 24.614] (II) intel: Driver for Intel(R) HD Graphics [ 24.614] (II) intel: Driver for Intel(R) Iris(TM) Graphics [ 24.614]

I found this page: https://01.org/linuxgraphics/downloads/2015q4-intel-graphics-stack-release I have an Intel NUC5C with "Intel HD" graphics and I'm trying to use CentOS 7.2 I downloaded the files suggested: cairo-1.14.4.tar.xz libva-1.6.2.tar.bz2 mesa-11.0.4.tar.xz intel-gpu-tools-1.13.tar.bz2 libva-intel-driver-1.6.2.tar.bz2 xf86-video-intel-2.99.917.tar.gz

I "wish" to not load the or even install the nouveau driver by default. I want to use the NVIDIA binary driver. I have tried a number of things: 1) in my kickstart package section add the line: -xorg-x11-drv-nouveau This did not work - it was still installed. 2) use the nvidia installer and it asks to create a modprobe.conf file to blacklist the driver. I said yes thats what I want.

Jerry Geis wrote: > > I am trying to find a way to tell the ORDER of X drivers. > > I have a VM image of CentOS 7. If I boot the image I want the generic > driver to load. But if I put that image on hardware I want the Intel driver > to load. > > So if I specific the /etc/X11/xorg.conf.d/20-intel.conf and specify Intel - > this is great for the physical device. But

Yan Li wrote: > If you need to use a non stock kernel, you can also try to download the > latest driver directly from nvidia. The nvidia official driver is very > easy to install and works with almost all kernel versions. It can also be > easily uninstalled too. Make sure you have the correct one, though. I have a number of systems with older NVidia cards, and have to pick and choose

Hi All - I have a systemd service file to start my application. Part of my service file is: [Service] Type=forking ExecStart=/path to start ExecStop=/path to stop RemainAfterExit=yes This works fine "normally". However - when I do a "yum update; and reboot" my script detects a kernel change and now does a number of "recompiling" steps for drivers and such before

Hi all, I am using centos 5.2 x86_64 on a box. and getting this error: wish -f pcalert.tcl Error in startup script: unknown color name "black" (processing "-background" option) invoked from within "canvas .c -height $canvas_height -width $screen_width -background black -highlightthickness 0 " invoked from within "set c [canvas .c -height

>I'll see if I can find some time this weekend to fix the elrepo package > and get it reinstated into the repository. >Phil Hi Phil, Thanks for the reply. Your correct this is OLD hardware. Everything was working with 7.5 thought I was good to go so to speak ... So When I was starting now to migrate OLD boxes from CentOS 6 to 7.6 it wasnt working. I can look at going

Morning... I have a package that I think wants to compile against the X11 source tree. http://openchrome.org - its a snapshot from there.... Anyway the command it tells me to run is: xmkmf /usr/src/xc make make install This is to build a updated X graphics driver... However when I do this I get errors as there is not /usr/src/xc (no surprise) I did then "up2date xorg-x11-sdk"

I can ssh into a remote machine. I can start X on that machine with startx How do I then start firefox on that machine (from the ssh prompt) and have it display on my machine in my office. So I want to be using firefox on the remote machine but displaying the screen output from firefox in my office. Both boxes are running centos 5. how is that done? Jerry

I have files in /etc/X11/xorg.conf.d rw-r--r--. 1 silentm silentm 311 Jul 9 13:25 00-keyboard.conf -rw-r--r--. 1 silentm silentm 328 Jul 9 14:28 01-display.conf This is my 01-display.conf # This file goes into /etc/X11/xorg.conf.d Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" SubSection "Display" Viewport 0 0

What is the difference between the GUI (system->Preferences->Remote Desktop) under centos 5.1 and editing /etc/X11/xorg.conf and adding the vnc in the modules section? Is one better than the other? Jerry

Hi, As a consequence of rolling out CR updates on Latitude E7470 (Skylake chipset), X would no longer start until I rolled back all of the xorg-\* packages. And to be more precise, looks like the culprit is xorg-x11-drv-intel: https://bugzilla.redhat.com/show_bug.cgi?id=1445583 as the CR package release version matches the one mentioned in Comment #2, in the regression context.

Hello my hardware has: 03:00.0 VGA compatible controller: NVIDIA Corporation GT218 [ION] (rev a2) rpm -qa | grep nvidia nvidia-detect-410.78-1.el7.elrepo.x86_64 kmod-nvidia-340xx-340.107-2.el7_6.elrepo.x86_64 nvidia-x11-drv-340xx-340.107-1.el7.elrepo.x86_64 rpm -qa | grep libva libva-vdpau-driver-0.7.4-19.el7.x86_64 libva-utils-1.8.3-4.el7.x86_64 libva-devel-1.8.3-1.el7.x86_64

Hi All, I had an issue. Manually installing Centos 6 everything worked X11 came up with nvidia binary drivers. Cool. However, I am working on a kickstart install for Centos 6 and that was not working. When I started X it would hang. no mouse no keyboard. however , remote ssh was available and worked. Thinking I had some serious bug in nvidia binary was my thought - but I kept looking. I saw

This is my /proc/cmdline BOOT_IMAGE=(hd0,gpt2)/boot/vmlinuz-4.18.0-147.5.1.el8_1.x86_64 root=UUID=c1bef884-0180-4955-a669-c99a8c64f75a ro crashkernel=auto resume=UUID=0fe1a972-9912-4803-b5ec-265a13a888c1 biosdevname=0 net.ifnames=0 rhgb quiet rd.driver. blacklist=nouveau nomodeset nouveau.modeset=0 acpi_backlight=vendor "acpi_osi=!Windows 2013" "acpi_osi=!Windows 2012" Jerry