similar to: Support for Intel Graphics 605 UHD

C7: lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation Device 3185 (rev 03) grep Driver /var/log/Xorg.0.log [ 24.374] (**) | |-->Device "Intel Graphics" [ 24.610] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: [ 24.614] (II) intel: Driver for Intel(R) HD Graphics [ 24.614] (II) intel: Driver for Intel(R) Iris(TM) Graphics [ 24.614]

Ok - I went back to CentOS 7. In the same box. CentOS 7 has this same file: Section "Device" Identifier "Intel Graphics" Driver "intel" EndSection /var/log/Xorg.0.log has the Driver being Intel i915 version 1.6.0 but in CentOS 8 - it does not work and uses the generic driver. Thoughts? Jerry

Thanks here is the kernel I'm running on C8 and the files listing. 4.18.0-147.5.1.el8_1.x86_64 #1 SMP Wed Feb 5 02:00:39 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux ./4.18.0-147.el8.x86_64/kernel/drivers/gpu/drm/i915 ./4.18.0-147.el8.x86_64/kernel/drivers/gpu/drm/i915/i915.ko.xz ./4.18.0-147.el8.x86_64/kernel/drivers/gpu/drm/i915/gvt

> module_blacklist=nouveau,amdgpu,radeon i915.alpha_support=1 ok I did that - regen that file and verified with cat /proc/cmdline This is not a dual monitor situation. I also removed all that other "legacy" stuff I had in there. no difference. Jerry

This is my /proc/cmdline BOOT_IMAGE=(hd0,gpt2)/boot/vmlinuz-4.18.0-147.5.1.el8_1.x86_64 root=UUID=c1bef884-0180-4955-a669-c99a8c64f75a ro crashkernel=auto resume=UUID=0fe1a972-9912-4803-b5ec-265a13a888c1 biosdevname=0 net.ifnames=0 rhgb quiet rd.driver. blacklist=nouveau nomodeset nouveau.modeset=0 acpi_backlight=vendor "acpi_osi=!Windows 2013" "acpi_osi=!Windows 2012" Jerry

Hello all, I just installed CentOS 7.8 on ASRock B460M Pro4 board. CPU is i5-10400. The display device is inside the CPU and the max resolution is 4096x2160 for HDMI. But when I connect my small screen (max full HD), the display resolution is only 800x600. >From seeing some info here, I installed EPEL for yum, and inxi. The "inxi -G" command's output is like this :

Hello all, I just installed CentOS 7.8 on ASRock B460M Pro4 board. CPU is i5-10400. The display device is inside the CPU and the max resolution is 4096x2160 for HDMI. But when I connect my small screen (max full HD), the display resolution is only 800x600. >From seeing some info here, I installed EPEL for yum, and inxi. The "inxi -G" command's output is like this :

I am running Rocky Linux latest version with the Mate Desktop 1.26.2 (the latest version in the EPEL repository) on a Dell Inspiron laptop with a 3840 x 2160 display and an external 1920 x 1080 Acer monitor connected via HDMI, see output below: $ inxi --graphics Graphics: Device-1: Intel UHD Graphics 620 driver: i915 v: kernel Device-2: NVIDIA GM108M [GeForce 940MX] driver: nouveau v: kernel

Dear R People: I have a data frame with the following column names: > names(funky) [1] "UHD.1" "UHD.2" "UHD.3" "UHD.4" "L..W..1" "L..W..2" "L..W..3" [8] "L..W..4" "B..W..1" "B..W..2" "B..W..3" "B..W..4" "W..B..1" "W..B..2" [15]

On Thu, 4 May 2023 16:32:16 -0700 Marc MERLIN <marc_nouveau at merlins.org> wrote: > Hi again, I just saw a bunch of commits from all of you (thanks), but > still can't find info if my thinkpad P73 with Quadro RTX 4000 > Mobile/TU104 is meant to be supported, or not, and if so, how I can > best report issues beyond what I've already sent. > > The intel graphics

Hello, I have an Intel NUC7PJYH running CentOS 6.8. This is a NUC with standard USB, 1GbE and 2*HDMI. Installation was no problem providing acpi=off. The problem is that by default the two displays are mirrored and I can?t seem to separate them. I can only see one HDMI port from CentOS. I need to see both HDMI ports discreetly. Can you please help. Regards, Mark Woolfson MW Consultancy Ltd

On 2019-08-06 12:32 p.m., Ilia Mirkin wrote: > Hi James, > > I semi-recently added support for HDMI 2.0 (in 4.20+, so you're good), > which is why you got 60Hz in the first place. In order for the high > rates to work, something called "scrambling" must be enabled. This is > done by 2-party agreement between the sink and the source. The sink > will inform the

Hi Ryszard! There is a dist function in R. It's in the mva package. You can set the kind of distance that you want. Thanks, Erin mailto:hodgess at gator.uhd.edu

Dear R People: When the D function is used for a symbolic derivative, an expression is returned, which is fine. How do you change that expression to a function, please? I've been experimenting with substitute and deparse, but no success yet. This is R 1.8.0 for Windows. thanks in advance for the help! Sincerely, Erin Hodgess mailto: hodgess at gator.uhd.edu

In R-beta (Masked Marvel), when I do the example from the read.pnm help file, this is what happens: x <- read.pnm(system.file("pictures/logo.pgm",package="pixmap")[1]) Warning message: In rep(cellres, length=2): x is NULL so the result will be NULL In R-2.15.3, it's all right. Thanks, Erin Erin M. Hodgess, Ph.D. Associate Professor Department of Computer and

Hello! Over the weekend, I updated my RcmdrPlugin.qual package. It works fine on a 64 bit Windows machine but not a 32 bit. This is very strange. The new menu with all of the Quality Control stuff does not appear. Have any of you run into this sort of thing before, please? Thanks, Sincerely, Erin Erin M. Hodgess, Ph.D. Associate Professor Department of Computer and Mathematical Sciences

Can you try something very simple - unplug the cable, and plug it back in, while the TV is on, and set to the HDMI input? That should ensure that the SCDC write can go through at modeset time. You can also force nouveau to avoid any modes that require scrambling by booting with nouveau.hdmimhz=340. Cheers, -ilia On Tue, Aug 6, 2019 at 1:15 PM James <bjlockie at lockie.ca> wrote: >

Hello, I need some help with regex. I have this to sentences. I need to extract both "49MU6300" and "LE32S5970" and put them in a new colum "SKU". A) SMART TV UHD 49'' CURVO 49MU6300 B) SMART TV HD 32'' LE32S5970 DataFrame for testing: ecommerce <- data.frame(a = c(1,2), producto = c("SMART TV UHD 49'' CURVO 49MU6300",

Dear R People: When will version 1.9 (for Windows) be ready, please? My reason for asking: there is an interesting library from Bioconductor called tkWidgets. However, it will only work with version 1.9.0 or higher. Are there ways around this, or should I just be patient? Thanks so much in advance! Sincerely, Erin Hodgess Associate Professor Department of Computer and Mathematical Sciences

Dear R People: In the function "decompose", the object has the class of "decomposed.ts". (from package stats) I would like to see the class definition and the method for the plotting. However, when I use isClass("decomposed.ts") I get "FALSE". When I check getMethods("plot") there is no method for plot on decomposed.ts Any suggestions,