similar to: CentOS 8 lokkit

On Fri, 31 Jan 2020 at 12:36, Jerry Geis <jerry.geis at gmail.com> wrote: > hi All - > > I tried doing: > yum provides "/usr/sbin/lokkit" > on CentOS 8 and got No Matches found. > > Where can I get his for C8? > > As far as I know you can't. It was last supported in Fedora in F23 2015-03-02 and was removed in later releases. It would need a major

On Tue, 4 Feb 2020 at 05:37, Pete Biggs <pete at biggs.org.uk> wrote: > On Mon, 2020-02-03 at 19:04 -0500, Jerry Geis wrote: > > Hi All, > > > > Over the last 20 some years I have a file with about 200K worth of > address > > that have "wrongly" tried to connect to my boxes running centos. So the > > file has one line per address or group of

These packages were in C7 - dont appear to be in C8 - not even in AppStream. How do I get them? Thanks, Jerry

Hi All, Over the last 20 some years I have a file with about 200K worth of address that have "wrongly" tried to connect to my boxes running centos. So the file has one line per address or group of addresses like: 2.244.112.0/24 So using the OLD iptables I would run through my file build the iptables.txt file and start that with DROP for the IP address. iptables ran through the big

On Aug 5, 2019, at 11:25 AM, Stephen John Smoogen <smooge at gmail.com> wrote: > > On Mon, 5 Aug 2019 at 13:17, Jerry Geis <jerry.geis at gmail.com> wrote: > >> Why is it that "all" I am really doing at the moment is copying things to >> an external SSD disk USB3 connected and the machine "freezes"... Why is >> that? >> > You

Hi All, I am 'trying' to set SMART_HOST in sendmail to point to smtp-relay.gmail.com but when looking at the /var/log/maillog its going to mx203.inbound-mx.net. [192.110.255.243], why??? my line from sendmail.mc define(`SMART_HOST', `smtp-relay.gmail.com') I did make in /etc/mail and service sendmail restart This is the only SMART_HOST in the config file. I started with the

So now that 8 is out - is it still "frowned" upon to do that in place update ? Is that not a good / valid solution ? Thanks, Jerry

It looks like Fedora 28 is past EOL and I am not able to locate a source for package downloads. Thanks, Ian On Sun, Oct 20, 2019 at 11:22 AM Ljubomir Ljubojevic <centos at plnet.rs> wrote: > > On 10/19/19 9:08 PM, Ian P. wrote: > > Hello Again, > > Is there any update on nut or apcupsd for CentOS 8? > > > > Also, I noticed that duplicity is not currently

To reduce memory consumption clobbered registers are handled with RegisterMask machine operands which contain a bitset of all registers clobbered. - Matthias > On Jul 29, 2015, at 3:00 PM, Daniel Sanders <daniel.sanders at imgtec.com> wrote: > > I believe I've identified the problem with almabench but I haven't found the root cause in the compiler yet. > > The

On Tuesday, April 9, 2019 7:40:01 AM PDT Johnny Hughes wrote: > On 4/8/19 3:20 PM, Benjamin Smith wrote: > > I'm about to rebuild a server, currently running CentOS 6. If I have to do > > an OS reinstall, my intention is to upgrade, as it's the oldest OS server > > under my purview. As this server is pretty low visibility, I'd like to > > see if I can start

I have used lokkit to setup iptables ( I have a big script that does this) basically just ports I want with "--port=https:tcp" etc... I wish to allow igmp and add igmp to the lokkit command line? How do I do that? I can add this to /etc/sysconfig/iptables: iptables -A RH-Firewall-1-INPUT -i eth1 -j ACCEPT iptables -A RH-Firewall-1-INPUT -i eth1 -p igmp -j ACCEPT iptables-save >

Thanks. This is making a lot more sense now and it's looking like this issue isn't Mips specific. Here's the IR dump before simple register coalescing (note: I've patched the IR printer to print the contents of the regmask): 4480B %vreg260<def> = LDC1 %vreg253, <cp#3>[TF=6]; mem:LD8[ConstantPool] AFGR64:%vreg260 GPR32:%vreg253 4496B %vreg261<def> = FMUL_D32

Hi all, I have a customer server with 32 cores, 128G ram i7960X. So nice box... Why is it that "all" I am really doing at the moment is copying things to an external SSD disk USB3 connected and the machine "freezes"... Why is that? clearly plenty of CPU RAM everything... I can see "blocking" to write data to the external disk - but there are 31 other cores and

I found this site https://www.linux-hardware.org/index.php?id=pci:8086-3185-8086-2212 Says the Intel UHD 605 graphics chip is supported in kernel > 4.11 centos 8 comes with 4.18 but I am not getting X on CentOS 8 with this chip. When I put this: Section "Device" Identifier "Intel Graphics" Driver "intel" EndSection in /etc/X11/xorg.conf.d it does not

I am wanting to pass arguments to lokkit to set up the iptables config file with an entry like this: ( i dont want to manually edit it - I want to do it automatically) iptables -A INPUT -p udp -m udp --dport 10000:20000 -j ACCEPT I have a small script file that has in it the ports I want enabled, like: ------------------- PORT_SSH="--port=22:tcp"

C7: lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation Device 3185 (rev 03) grep Driver /var/log/Xorg.0.log [ 24.374] (**) | |-->Device "Intel Graphics" [ 24.610] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: [ 24.614] (II) intel: Driver for Intel(R) HD Graphics [ 24.614] (II) intel: Driver for Intel(R) Iris(TM) Graphics [ 24.614]

On 10/4/19 6:59 PM, Fred Smith wrote: > On Fri, Oct 04, 2019 at 04:52:28PM -0600, David G. Miller wrote: >> On 10/3/19 1:37 PM, Ljubomir Ljubojevic wrote: >>> On 10/3/19 5:49 PM, Kaushal Shriyan wrote: >>>> Hi, >>>> >>>> I will appreciate it if someone can help me understand the differences >>>> between CentOS 7.x and CentOS 8.x OS.

I did a "yum search libssh2-devel" it says no matches found. I did a "yum search libssh2" it says name matched and libssh2. Where or how do install the -devel package for C8 ? Thanks, Jerry

On Fri, 24 Aug 2018 at 18:16, TE Dukes <tdukes at palmettoshopper.com> wrote: > > > > > -----Original Message----- > > From: CentOS [mailto:centos-bounces at centos.org] On Behalf Of Stephen > > John Smoogen > > Sent: Friday, August 24, 2018 3:58 PM > > To: CentOS mailing list > > Subject: Re: [CentOS] Mail has quit working > > > > On

Hi All - I use qemu on my centOS 7.7 box that has software raid of 2- SSD disks. I installed an nVME drive in the computer also. I tried to insall CentOS8 on it (the physical /dev/nvme0n1 with the -hda /dev/nvme0n1 as the disk. The process started installing but is really "slow" - I was expecting with the nvme device it would be much quicker. Is there something I am missing how to