similar to: Install Questions

Hi, This is my current config: /dev/md0 -> 200 MB -> sda1 + sdd1 -> /boot /dev/md1 -> 36 GB -> sda2 + sdd2 -> form VolGroup00 with md2 /dev/md2 -> 18 GB -> sdb1 + sde1 -> form VolGroup00 with md1 sda,sdd -> 36 GB 10k SCSI HDDs sdb,sde -> 18 GB 10k SCSI HDDs I have added 2 36 GB 10K SCSI drives in it, they are detected as sdc and sdf. What should I do if I

I have this machine running CentOS 6.10 x86_64 and it's ripe to be moved to CentOS 7.5. I mounted the DVD and rebooted and went through the graphic install until I reached the point of allocating the disks. It showed no available disk drives. There are 6 disk drives on this machine: 4 - 1 TB and 2 - 2 TB all WD Black - they have been made up with /dev/sda1 (1024 MB) and /dev/sdd1 (1024

Hello, I have a weird problem after adding new PV do LMV volume group. It seems the error comes out only during boot time. Please read the story. I have couple of 1U machines. They all have two, four or more Fujitsu-Siemens SAS 2,5" disks, which are bounded in Raid1 pairs with Linux mdadm. First pair of disks has always two arrays (md0, md1). Small md0 is used for booting and the rest - md1

I attempted to install CentOS 7 x86_64 on my machine that has the following hardware: Motherboard:????? ASRock X99 Taichi BIOS:???????????? AMI v P1.40? 08/04/2016 CPU:????????????? Intel Core I7-5820K RAM:????????????? 64 GB (8 x 8 GB DIMM) Optical:????????? LG Blu Ray 25 G / 50 G burner Storage:????????? 2 - 120GB?? PNY CS1311 SSD? 4 - 4 TB Western Digital hard drives ????????????????? The 2

I am setting up a Centos 6.5 box to host some Openvz containers. I have a 120gb SSD I am going to use for boot, / and swap. Should allow for fast boots. Have a 4TB drive I am going to mount as /backup and use to move container backups too etc. The remaining four 3TB drives I am putting in a software RAID 10 array and mount as /vz and all the containers will go there. It will have by far the

Somewhere, mdadm is cacheing information. Here is my /etc/mdadm.conf file: more /etc/mdadm.conf # mdadm.conf written out by anaconda DEVICE partitions MAILADDR root ARRAY /dev/md0 level=raid1 num-devices=4 metadata=0.90 UUID=55ff58b2:0abb5bad:42911890:5950dfce ARRAY /dev/md1 level=raid1 num-devices=2 metadata=0.90 UUID=315eaf5c:776c85bd:5fa8189c:68a99382 ARRAY /dev/md2 level=raid1 num-devices=2

CentOS 6.3, x86_64. I have noticed when building a new software RAID-6 array on CentOS 6.3 that the mismatch_cnt grows monotonically while the array is building: # cat /proc/mdstat Personalities : [raid6] [raid5] [raid4] md11 : active raid6 sdg[5] sdf[4] sde[3] sdd[2] sdc[1] sdb[0] 3904890880 blocks super 1.2 level 6, 512k chunk, algorithm 2 [6/6] [UUUUUU]

Il 29/01/19 18:47, mark ha scritto: > Alessandro Baggi wrote: >> Il 29/01/19 15:03, mark ha scritto: >> >>> I've no idea what happened, but the box I was working on last week has >>> a *second* bad drive. Actually, I'm starting to wonder about that >>> particulare hot-swap bay. >>> >>> Anyway, mdadm --detail shows /dev/sdb1

Alessandro Baggi wrote: > Il 29/01/19 15:03, mark ha scritto: > >> I've no idea what happened, but the box I was working on last week has >> a *second* bad drive. Actually, I'm starting to wonder about that >> particulare hot-swap bay. >> >> Anyway, mdadm --detail shows /dev/sdb1 remove. I've added /dev/sdi1... >> but see both /dev/sdh1 and

Il 29/01/19 20:42, mark ha scritto: > Alessandro Baggi wrote: >> Il 29/01/19 18:47, mark ha scritto: >>> Alessandro Baggi wrote: >>>> Il 29/01/19 15:03, mark ha scritto: >>>> >>>>> I've no idea what happened, but the box I was working on last week >>>>> has a *second* bad drive. Actually, I'm starting to wonder about

Has anyone used the new AMD CPUs and AM4 motherboards with CentOS 6 / 7? Any reservations or warnings? -- Eugene Poole Woodstock, Georgia

More info here https://www.servethehome.com/amd-ryzen-with-ubuntu-here-is-what-you-have-to-do-to-fix-constant-crashes/ Sent with AquaMail for Android http://www.aqua-mail.com On 8 May 2017 11:53:40 a.m. "peter.winterflood" <peter.winterflood at ossi.co.uk> wrote: > > > Was looking into getting one. Idealy needs 4.10 kernel. Fix maybe > backported . Did not check

The subject says it all. -- Eugene Poole Woodstock, Georgia

Il 30/01/19 14:02, mark ha scritto: > On 01/30/19 03:45, Alessandro Baggi wrote: >> Il 29/01/19 20:42, mark ha scritto: >>> Alessandro Baggi wrote: >>>> Il 29/01/19 18:47, mark ha scritto: >>>>> Alessandro Baggi wrote: >>>>>> Il 29/01/19 15:03, mark ha scritto: >>>>>> >>>>>>> I've no idea what

Alessandro Baggi wrote: > Il 29/01/19 18:47, mark ha scritto: >> Alessandro Baggi wrote: >>> Il 29/01/19 15:03, mark ha scritto: >>> >>>> I've no idea what happened, but the box I was working on last week >>>> has a *second* bad drive. Actually, I'm starting to wonder about >>>> that particulare hot-swap bay. >>>>

Il 30/01/19 16:33, mark ha scritto: > Alessandro Baggi wrote: >> Il 30/01/19 14:02, mark ha scritto: >>> On 01/30/19 03:45, Alessandro Baggi wrote: >>>> Il 29/01/19 20:42, mark ha scritto: >>>>> Alessandro Baggi wrote: >>>>>> Il 29/01/19 18:47, mark ha scritto: >>>>>>> Alessandro Baggi wrote:

> On 01/30/19 03:45, Alessandro Baggi wrote: >> Il 29/01/19 20:42, mark ha scritto: >>> Alessandro Baggi wrote: >>>> Il 29/01/19 18:47, mark ha scritto: >>>>> Alessandro Baggi wrote: >>>>>> Il 29/01/19 15:03, mark ha scritto: >>>>>> >>>>>>> I've no idea what happened, but the box I was working

Alessandro Baggi wrote: > Il 30/01/19 16:33, mark ha scritto: > >> Alessandro Baggi wrote: >> >>> Il 30/01/19 14:02, mark ha scritto: >>> >>>> On 01/30/19 03:45, Alessandro Baggi wrote: >>>> >>>>> Il 29/01/19 20:42, mark ha scritto: >>>>> >>>>>> Alessandro Baggi wrote:

I'm trying to move to CentOS 7.? One of my concerns is how to make the changes to grub that supports booting from either of the disk partitions that make up /dev/md0 (/dev/sda1 and /dev/sdb1) or whatever it would be under CentOS 7. Is there some document or tutorial available on making the move from CentOS 6 to CentOS 7? -- Eugene Poole Woodstock, Georgia

I've got a WD My Passport Ultra 1TB (USB) plugged into my router and I have 4 Windows machines, all running Windows 7, and all 4 machines can see the device as drive 'Y'. I use this device several ways, i.e. all my Windows machines use the same Firefox bookmarks and cookies I've got 5 machines running CentOS 6 x86_64 and I'd like to know what do I have to do for them to