similar to: CentOS 8 package question

I am trying to find libssh2.h In the past I installed libssh2-devel I have libssh2 installed. I have tried yum install libssh2-devel - nothing found yum provides "*/libssh2.h" - nothing found yum search libssh2.h - nothing found. Thoughts ? Jerry

hi All - I tried doing: yum provides "/usr/sbin/lokkit" on CentOS 8 and got No Matches found. Where can I get his for C8? Jerry

Hello, I've been unable to connect to a remote host from within my network using the following argument. virsh/virt-manager -c qemu+ssh://user@host:port/system I've tried libssh & libssh2 as well. Using ssh just prompts me for the host password indefinitely. When using libssh2 the connection is rejected. The host computer is using a custom ssh port which I've added to the above

These packages were in C7 - dont appear to be in C8 - not even in AppStream. How do I get them? Thanks, Jerry

C7: lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation Device 3185 (rev 03) grep Driver /var/log/Xorg.0.log [ 24.374] (**) | |-->Device "Intel Graphics" [ 24.610] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: [ 24.614] (II) intel: Driver for Intel(R) HD Graphics [ 24.614] (II) intel: Driver for Intel(R) Iris(TM) Graphics [ 24.614]

I'm trying to send data to a server with openssh 7.9p1, but it's hanging somewhere. the client stop at the line : Jul 7 11:52:16 TOTO sshd[19553]: debug3: channel 0: will not send data after close and after 5 minutes the client closes the connection, why ? This is the trace of the server openssh : ( DEBUG3 level) Jul 7 11:52:15 TOTO sshd[31175]: debug3: fd 6 is not O_NONBLOCK Jul

Hi, I noticed some issues with the ssh transport mode where the virt-v2v would fail because of issue with libssh2. I see a lot of following errors before the conversion terminates: > commandrvf: /usr/sbin/update-initramfs -v -c -k 4.9.0-4-amd64 > read failed: would block (libssh2 error code: -37, sftp error code: 0) > /usr/sbin/mkinitramfs: 265: /usr/sbin/mkinitramfs: dirname: Exec

On 08/03/2016 06:13 PM, Chris Adams wrote: > Once upon a time, Alice Wonder <alice at domblogger.net> said: >> Something in the curl build will always link the binary against >> OpenSSL if the openssl-lib package is present, and will always link >> the library against OpenSSL if any TLS option is enabled in the >> configure. > > No, it doesn't. You can

On 2019-11-15 10:52, Stephen John Smoogen wrote: > On Fri, 15 Nov 2019 at 11:12, Alessandro Baggi > <alessandro.baggi at gmail.com> wrote: >> >> Hi all, >> I've several questions about C8. I'm using 8 on my personal NAS and >> works very well. I'm running several VMs with centos 8 and noticed >> something: >> > > OK most of these

Am 10.04.2019 um 19:00 schrieb mark <m.roth at 5-cent.us>: > > Benjamin Smith wrote: >> On Tuesday, April 9, 2019 7:40:01 AM PDT Johnny Hughes wrote: >> >>> On 4/8/19 3:20 PM, Benjamin Smith wrote: >>> >>>> I'm about to rebuild a server, currently running CentOS 6. If I have >>>> to do an OS reinstall, my intention is to

Hi All - I use qemu on my centOS 7.7 box that has software raid of 2- SSD disks. I installed an nVME drive in the computer also. I tried to insall CentOS8 on it (the physical /dev/nvme0n1 with the -hda /dev/nvme0n1 as the disk. The process started installing but is really "slow" - I was expecting with the nvme device it would be much quicker. Is there something I am missing how to

Hi all, I've several questions about C8. I'm using 8 on my personal NAS and works very well. I'm running several VMs with centos 8 and noticed something: 1) Why corosync, pacemaker and pcs are missing on C8? They are only available on rhel with payments( rhel ha addons)? 2) Why there is only Gnome as available DE? I use centos on my workstation and I'm a kde-plasma user. XFCE

I found this site https://www.linux-hardware.org/index.php?id=pci:8086-3185-8086-2212 Says the Intel UHD 605 graphics chip is supported in kernel > 4.11 centos 8 comes with 4.18 but I am not getting X on CentOS 8 with this chip. When I put this: Section "Device" Identifier "Intel Graphics" Driver "intel" EndSection in /etc/X11/xorg.conf.d it does not

Hi all, I am using kickstart to install CentOS 8. Course I started with my kickstart from 7. Some packages are not found on the kickstart install (not present on the DVD I guess) like: ImageMagick sox libogg-devel libssh2-devel So again - I know they are not present on the DVD but they are present. What is the Kickstart trick to say %packages if not present - ATTEMPT to load later with yum ???

Without wanting to sound too pushy, I'm wondering if there is any update on the status of Mate now that Centos 8 has been released? I would love to jump on C8 and start playing with it, but the lack of Mate is kind of a showstopper for me at the moment. -- MELVILLE THEATRE ~ Real D 3D Digital Cinema ~ www.melvilletheatre.com

Hi all , I am running C7, and C8 as guest at this time. I noticed that when right click on desktop, and select display on C8 - that the largest resolution I get is 1080p, I am running a 4K monitor - is there a way to get higher resolution in the Guest. I am running with qemu 2.0.0 Thanks, Jerry

On 3/6/19 9:40 AM, Richard W.M. Jones wrote: > --- > plugins/curl/nbdkit-curl-plugin.pod | 22 +- > plugins/ssh/nbdkit-ssh-plugin.pod | 150 ++++++++ > configure.ac | 17 + > plugins/ssh/ssh.c | 521 ++++++++++++++++++++++++++++ > README | 4 + > TODO | 10 +- >

It looks like Fedora 28 is past EOL and I am not able to locate a source for package downloads. Thanks, Ian On Sun, Oct 20, 2019 at 11:22 AM Ljubomir Ljubojevic <centos at plnet.rs> wrote: > > On 10/19/19 9:08 PM, Ian P. wrote: > > Hello Again, > > Is there any update on nut or apcupsd for CentOS 8? > > > > Also, I noticed that duplicity is not currently

On 08/03/2016 05:33 PM, Thomas Eriksson wrote: > On 08/03/2016 05:23 PM, Alice Wonder wrote: >> On 08/03/2016 05:20 PM, Alice Wonder wrote: >>> On 08/03/2016 05:11 PM, Alice Wonder wrote: >>>> I'm having a major frustration with curl. >>>> >>>> When building curl, if libssl.so.10 is present the curl binary WILL link >>>> against

I am trying to boot a grub entry for CentOS 8 menuentry "Server Install CentOS 8" { linux /boot/vmlinuz noverifyssl ks= https://devgeis.LayeredSolutionsInc.com:443/kickstart/ks_update_to_server8.cfg biosdevname=0 net.ifnames=0 ksdevice=eth0 ip=192.168.1.13 gateway=192.168.1.1 netmask=255.255.255. 0 nameserver=192.168.1.1 inst.sshd sshd=1 initrd /boot/initrd.img