similar to: Semi-OT: LSI raid card sorta....

Scott Silverman wrote: > On Tue, Jul 10, 2018 at 12:37 PM, mark <m.roth at 5-cent.us> wrote: > >> I've got a box running C7, just updated (yesterday). It had an onboard >> RAID controller, and an HBA. I just installed a new, additional RAID >> card, all LSI. >> >> MegaCli64 only sees one controller. I can't seem to find the magic to >> see

I would try the newer storcli utility instead of megacli. Thanks, Scott Silverman | IT | Simplex | 312-360-2444 230 S. LaSalle St., Suite 4-100, Chicago, IL 60604 On Tue, Jul 10, 2018 at 12:37 PM, mark <m.roth at 5-cent.us> wrote: > I've got a box running C7, just updated (yesterday). It had an onboard > RAID controller, and an HBA. I just installed a new, additional RAID

On 1/30/2015 1:53 AM, Gordon Messmer wrote: > On 01/29/2015 05:07 AM, Jatin Davey wrote: >> Yes , it is a SATA disk. I am not sure of the speed. Can you tell me >> how to find out this information ? Additionally we are using RAID 10 >> configuration with 4 disks. > > What RAID controller are you using? > > # lspci | grep RAID [Jatin] [root at localhost ~]# lspci |

I have a handful of new systems where I've seen unexpectedly low disk performance on an Avago SAS controller, when using CentOS 7. It looked like a regression, so I installed CentOS 6 on one of them and reloaded CentOS 7 on the other. Immediately after install, a difference is apparent in the RAID rebuild speed. The CentOS 6 system is initializing its software RAID5 array at somewhere

On 1/30/2015 9:44 AM, John R Pierce wrote: > On 1/29/2015 7:21 PM, Jatin Davey wrote: >> [root at localhost ~]# lspci | grep RAID >> 05:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS-3 >> 3108 [Invader] (rev 02) > > to get info out of those, you need to install MegaCli64 from LSI > Logic, which has the ugliest command lines and output you've

Does anyone know what program can be used to query the RAID status from the OS for an on-board LSI SAS 2308-4i? On this page: http://docs.avagotech.com/docs/12351997 there is a curious note on the left that reads: "Integrated MegaRAID support available upon request" After one mostly fruitless round of chatting with LSI/Avago/Broadcom and one completely fruitless round of chatting

On 1/29/2015 7:21 PM, Jatin Davey wrote: > [root at localhost ~]# lspci | grep RAID > 05:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS-3 > 3108 [Invader] (rev 02) to get info out of those, you need to install MegaCli64 from LSI Logic, which has the ugliest command lines and output you've ever seen. I use the python script below, which I put in

Thank you for your help. Le 05/01/2015 19:10, John R Pierce a ?crit : > works here fine on the 9261, which is an OEM version of the same card > with the connectors in a different orientation... you might check your > LSI firmware revision. My firmware seems to be more up to date. Anyway, I will try to update firmware. I have to check how to do that. # dmesg |grep LSI scsi4 : LSI SAS

Dear list, I have inherited a CentOS-5 box with a LSI Sata Raid controller. It is configured as a RAID5 w/hot-standby. My concern is that I have no present means of determining the RAID status w/o downing the system and going into the bios to get status. If a disk has failed and brought the standby disk online, I would like to know about it, the day it happens by seeing it in syslog or getting

Hello, I am trying to pass my LSI SAS 2008 controller to my PV domu (openindiana) and I can not get it working. I have read that xen does not support the loading of option ROM''s in pv domu''s and that this support is being, or will be, added. http://markmail.org/thread/2njw43iaurmvzlys This post is more than a year old now. I am wondering if there is a way to get my LSI SAS

I just had an IBM in a remote location with a hardware raid1 have both drives go bad. With local machines I probably would have caught it from the drive light before the 2nd one died... What is the state of the art in linux software monitoring for this? Long ago when that box was set up I think the best I could have done was a Java GUI tool that IBM had for their servers - and that seemed like

John R Pierce wrote: > On 7/26/2016 10:20 AM, Fawzy Ibrhim wrote: >> I want to install Centos 7 latest build on NEC Server 5800/120b-2. >> >> The installation wizard fails to detect the storage connected to LSI >> SATA MegaRaid PCI. > > which megaraid card? they've made quite a lot. lspci will list the > card type... > > linux will only see storage

Hi everybody. I have an HP StorageWorks array connected to one of my servers, connected via an LSI controller (lspci reports: SCSI storage controller: LSI Logic / Symbios Logic SAS1068E PCI-Express Fusion-MPT SAS (rev 08)) on an HP DL385 running CentOS 5.5 x86_64. I have set up multipath and all is working but, when I create a snaphost and export it as a new LUN from the HP web interface, it

Hi, folks, Got an older Dell R410, with an LSI 1068E PCI-Express Fusion-MPT SAS (rev 08). It *appears* that a) trying MegaRaid, and b) from what I'm googling, that what I need are mptfusion-related packages. Unfortunately, yum shows me nothing available in base, epel, or rpmfusion. Am I looking for the wrong thing, or does anyone have a source (no, I haven't looked at LSI, sorry

On Thursday 02 November 2017 14:10:25 Bowie Bailey wrote: > If you want raid 5 or 6, then you should get a hardware controller. For > raid 1, mdadm should work just fine.? I would suggest trying it before > buying a raid controller.? If it works for you, you save a few hundred > dollars and you have one less piece of hardware to worry about. > > I haven't looked at them in

On Xen-3.4 (unstable version), I have created CentOS PV guest and dedicated 1068 SAS controller but I am not able to see the disk which is connected to 1068 SAS controller when I do fdisk -l (vtd support is enabled in Xen). Looks like the pci device(SAS controller) is getting dedicated successfully as I can see the device in the list of pci devices shown by lspci. 05:00.0 SCSI storage

Hi all, I have a Opteron-machine with the MPT SCSI-controller (Symbios 53c1030). At least in i386-mode, mkinitrd does not seem to build a usable initrd for 2.6.13.x (.3 tested) with this kernel. With 2.6.12.6 it works fine. I have not tested this in x86_64 -mode yet. The symptom is that mptbase and mptscsih load, but mptscsih does not discover any controllers nor drives, and things like

Got a new box I'm trying to set up. I configured the RAID from the firmware, but "fast initialize" was sitting there at 0% (it's about 43 or 45TB). The first time I tried this, I said background, and rebooted the system. And the stupid annoying alarm started up as the system came up. This time, having *finally* figured out how to set up hot spares from the WebBIOS, I suspended

On 2/2/2015 10:32 AM, John R Pierce wrote: > On 2/1/2015 8:25 PM, Jatin Davey wrote: >> >> On 2/2/2015 9:25 AM, John R Pierce wrote: >>> On 2/1/2015 7:31 PM, Jatin Davey wrote: >>>> >>>> I ran your script and here is the output for it: >>>> >>>> Start of the Output*************************** >>>> [root at localhost

Hello I do have problem using Linux with an external HP tape drive. The server platform is also an HP Server; the server is an HP ML350 G4, and the Tape drive is a HP Storage Works Ultrium 448 - 1U Rack-mountable. HP Ultrium documentation says two drivers should be automatically up, sym53c8xx for LSI SCSI interface "st" for tape and /proc/scsi/scsi should contain information about