similar to: Centos 7 on Dell Latitude E6500

Hello Jonathan, Saturday, May 12, 2018, 9:39:01 PM, you wrote: > At a bare minimum, I'd try using CentOS 7 1804: > http://isoredirect.centos.org/centos/7/isos/x86_64/ thanks; after some waiting time, 1804 now keeps repeating "dracut initqueue timeout - starting timeout scripts" for a while, then drops into the emergency shell. no suspicious error messages in the log.

Does this laptop have the Nvidia Quadro graphics option? If so try booting with NOMODESET. Also, if available in the BIOS turn OFF switchable graphics. Mike

Mike, Johnny, BIOS is version A29, which is the latest one on the dell website. > Does this laptop have the Nvidia Quadro graphics option? If so try > booting with NOMODESET. Also, if available in the BIOS turn OFF > switchable graphics. no, it just has intel onboard graphics, there's also no option for switchable graphics in the BIOS. NOMODESET didn't change anything,

On Sat, May 12, 2018 at 08:55:58PM +0200, Rainer F?genstein wrote: > Hi, > > I tried to install Centos7 x86_64 minimal 1503-01 from an USB > flash drive on my old Dell Latitude E6500 laptop. > [...] > what to try next? any additional infos I can give you? At a bare minimum, I'd try using CentOS 7 1804: http://isoredirect.centos.org/centos/7/isos/x86_64/ 1503 is 3

I am attempting to get multipath working with device-mapper (CentOS 4.2 and 4.3). It works on EVERY install of mine from RH (also v4.2, 4.3), but the same multipath.conf imported to all my installs of CentOS do not work. Note that I have tested a working 4.2 configuration file from RH on CentOS 4.2 and a working 4.3 configuration (it changed slightly) on CentOS 4.3. Neither worked. Our production

On 6/12/2015 7:09 PM, jd1008 wrote: >> > I want to thank you for posting your installation experience with > Centos 7. > My laptop is Latitude E6500 and I am quite certain it will experience > the same issue > because it is almost the same as your laptop. Difference might be in > cpu speed > and in RAM. My cpu is 2.81GHz dual core, and RAM is 8GB. the E6x00, E6x10,

Hi, Thanks for reading this. I installed CentOS 7 (tried the latest ISO image and the previous build) on the laptop and got to the point where I am logging into the desktop environment and the laptop just shuts down. I check the event log in BIOS and find that a thermal event has occurred and the system powered off to prevent damage. I can take the same laptop with Windows 7 installed and run

On 11/22/2016 12:41 PM, wwp wrote: > Latitude OK, I run CentOS6/7 on that. which Latitude? they've probably made 100 different laptops over the last couple decades branded 'Latitude'. I bet my wife's new Latitude 15 5000 would be problematic, it uses USB C/Thunderport for its docking station which has 2 additional video adapters in it. She's even having some issues

Hello there, I'd like to have iso image version for ultra sparc 64bit. Recently, I downloaded centos version 4.2 beta iso image and installed on SunUltra sparc 64 bit machine. It was hang when it went to the screen " the CentOS 4.2 beta screen, <Tab>/<Alt tab> | <Space> selects | <F12> next screen ". Any idea? Please help. Thanks in advance. Amy on your

Hello, suppose I want to use a special configuration for my IBM/1814 storage array luns, then I put something like this in multipath.conf devices { device { vendor "IBM" product "^1814" product_blacklist "Universal Xport" path_grouping_policy "group_by_prio" path_checker

Hi, I'm recently retired from my university job. I am looking for a laptop to run CentOS 6/7. My university was a traditional Dell site so I've used Latitude laptops for years, currently E6500/E6510. Anybody got any experience of running CentOS on the newer Dell Latitudes E5000 or E7000. These are not certified according to Redhats' Hardware Guide. Alternatively Precision

----- Oorspronkelijk bericht ----- Van: "John R Pierce" <pierce at hogranch.com> Aan: centos at centos.org Verzonden: Vrijdag 12 juni 2015 07:38:38 Onderwerp: Re: [CentOS] CentOS 7 + Dell Latitude E6420 laptop = thermal shutdown On 6/12/2015 7:09 PM, jd1008 wrote: >> > I want to thank you for posting your installation experience with > Centos 7. > My laptop is

Hi All, My CentOS 5.1 server is using iSCSI attached disks connecting to a dual controller storage array. I have also configured multipathd to manage the multiple paths. Everything works well, and on boot the dev nodes are automatically created in /dev/mapper. On these devices, I have created logical volumes using lvm2. My problem is that lvm does not recognize these iscsi/multipath volumes on

Dear list, we have a relatively new Sun Storage 7310, where we connect CentOS 5.5 Servers (IBM LS21/LS41 Blades) via Brocade Switches, 4GBit FC. The Blades boot from SAN via qla2xxx, and have no harddisks at all. We want them to use multipathing from the very beginning, so /boot and / are already seen by multipathd. Problem is, that the Sun 7310 has two storage heads which run in

At the beginning of January I encountered a problem where several vm guests on a single host somehow managed to see the the virtual disks assigned to other guests on the same hosts. I was unable to resolve this situation and shutdown the affected guests after creating new guest instances and moving the services and data off the corrupted guests. I have since removed these guests via virt-manager

At the beginning of January I encountered a problem where several vm guests on a single host somehow managed to see the the virtual disks assigned to other guests on the same hosts. I was unable to resolve this situation and shutdown the affected guests after creating new guest instances and moving the services and data off the corrupted guests. I have since removed these guests via virt-manager

Hi, My storage admin just assigned a Lun (fibre) to my server. Then re scanned using echo "1" > /sys/class/fc_host/host5/issue_lip echo "1" > /sys/class/fc_host/host6/issue_lip I can see the scsi device using dmesg But mpath device are not created for this LUN Pleas see below. The last 4 should be active and I think this is the problem Kernel:

What is the maximum number of AMD64 cores supported by CentOS 4? The RedHat page https://www.redhat.com/software/rhel/configuration/ suggests that RHEL 4 AS supports up to 8 AMD64/EM64T logical cpus. Is that accurate and does it apply to CentOS 4? I see a few vendors offering boxes with 8 (dual core) CPU sockets. IWILL for one. Thanks, Tony Schreiner Boston College

On Tuesday 22 November 2016 18:32:14 Gordon Messmer wrote: > On 11/22/2016 07:23 AM, Tony Molloy wrote: > > I am looking for a laptop to run CentOS 6/7. My university was a > > traditional Dell site so I've used Latitude laptops for years, > > currently E6500/E6510. > > Dell's Linux laptops are listed here: > >

Hi Max, On Wed, 2 Oct 2019 15:08:43 +0000, Max DiOrio <Max.DiOrio at ieeeglobalspec.com> wrote: > As soon as I made the configuration change and restarted CTDB, it crashes. > > Oct 2 11:05:14 hq-6pgluster01 systemd: Started CTDB. > Oct 2 11:05:21 hq-6pgluster01 systemd: ctdb.service: main process exited, code=exited, status=1/FAILURE > Oct 2 11:05:21 hq-6pgluster01