Displaying 20 results from an estimated 70000 matches similar to: "CentOS 7.5"
2018 Jul 10
3
Certbot error CentOS 7.5
Hi All - I am running CentOS 7.5 and trying to use certbot.
I am getting an error 403 forbidden on the
/.well-known/acme-challenge/-CG_gSckofY5ln7TdMvoanDI1_FBRh8otQkyB0hxmoo
Some searching indicated permission problems... I also noticed that the
/var/www/html directory does not even have the .well-known directory in
it. The /var/www/html directory was root:root I changed it to root:apache
2016 Jan 21
4
is there some blocking in 11.21.0
I am using the AMI interface to start calls.
At one point I have a 10 second delay "Wait(10)" in the dialplan...
During this time it "seems" that if I then connect with the manager
interface
and place a call that nothing happens till the 10 seconds is done...
I am requesting Async yes...
manager_str Action: Originate[CR ][LF ]Async: Yes[CR ][LF ]Channel:
SIP/430[CR ][LF]
2017 Sep 13
4
Update to 7.4 using DVD
I am attempting to update to 7.4 using the DVD
I get these errors(truncated list)
Error: Package: libgpod-0.8.3-14.el7.x86_64 (@epel)
Requires: libusbmuxd.so.2()(64bit)
Removing: usbmuxd-1.0.8-11.el7.x86_64 (@anaconda)
libusbmuxd.so.2()(64bit)
Obsoleted By: usbmuxd-1.1.0-1.el7.x86_64 (c7-media)
Not found
Error: Package:
2011 Dec 07
1
redirect a ringing phone
I am using AMI to call a phone and play a wave file. That works fine
to SIP/401.
Now I am trying to "redirect" that call that is ringing to another phone
(SIP/404).
When I do it the other phone rings but the first phone continues to ring
also.
Then when I answer on SIP/404, I get a ring not the wave file.
Action: Setvar
Channel: SIP/401-00000004
Variable: SMVOICE_CALLAT
2017 Sep 13
7
Update to 7.4 using DVD
I am running the propriatry NVIDIA driver 384.69 for GT 720 support.
Jerry
2009 Feb 16
3
command show channels concise
I am getting a priveldged command error on the manager API.
16-Feb-09 11:51 am asterisk_command() Action: Login
16-Feb-09 11:51 am asterisk_command() Username: XXX
16-Feb-09 11:51 am asterisk_command() Secret: ZZZZ
16-Feb-09 11:51 am asterisk_command() Events: off
16-Feb-09 11:51 am DEBUG: Response: Success[CR ][LF ]Message:
Authentication accepted[CR ][LF ][CR ][LF ]
16-Feb-09 11:51 am
2011 May 17
1
Question on AMI
I am using asterisk 1.4.41 and the AMI
I am trying to execute a command over AMI, specifically "core show
channels concise"
"sometimes" I get this back:
asterisk_command_show_channels() execute failed. 'Response: Follows[CR
][LF ]Privilege: Command[CR ][LF
]OutgoingSpoolFailed!smvoice-dialout!failed!1!Down!AGI!smvoice|-digium_failed!!!3!0!(None)[LF
]'
I'm not
2019 Dec 03
1
CentOS 7 as a guest VM
Warren,
>Now that we?ve dispensed with Nagle, let?s get down to the actual issue.
Correct. I was trying to find something... Agreed that is on the sending
side - I am on the receiving side.
Are there other options that this single byte CR over socket is not getting
seen by my application. tshark shows its been received, I have tried to
skip my select() call and just call recv() with
2017 Apr 12
4
email subject length issue
Oh I understand now what is happening. The subject is coming in as three
lines.
Subject: Tornado Monday, 03/27/2017 at 20:27:02. The Point BB.OBSURGRH is
in Alarm at PRI3 with a value of 63.4 %.Informational Text: OB SURGERY
HUMIDITY ALARM
I'm not getting the second two lines.
How "should" one correctly get the subject ???
What I did was in my .procmailrc file
SUBJECT=`cat |
2017 Sep 19
6
update to 7.4
I was doing an update to 7.4 and somewhere in middle the machine died.
If I drop back to a previous kernel the machine is alive. So how do I say
"forget the previous yum update" and start all over and do it again.
Booting into the new kernel I get a kernel fault. So going back one level
on teh boot screen solves that - I just need to start the update again. How
is that?
Thanks,
Jerry
2016 Jan 21
4
is there some blocking in 11.21.0
>Are you saying that this worked in earlier versions but you started to
>get the delay when you updated to 11.21.0? Or just that you happened to
>be using 11.21.0 the first time you tried this scenario?
I should have said "first time" trying this.
Any thoughts?
Jerry
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
2017 Nov 06
6
Nvidia error
I am getting this error on CentOS 7.4
kernel: NVRM: API mismatch: the client has the version 384.98, but#012NVRM:
this kernel module has the version 384.90. Please#012NVRM: make sure that
this kernel module and all NVIDIA driver#012NVRM: components have the same
version
nvidia-detect -v
Probing for supported NVIDIA devices...
[10de:1288] NVIDIA Corporation GK208 [GeForce GT 720]
This device
2017 Sep 14
1
Update to 7.4 using DVD
On 09/13/2017 07:59 PM, Johnny Hughes wrote:
> On 09/13/2017 04:12 PM, Jerry Geis wrote:
>> if I do "init 3" to exit graphics. then run startx - it does not start -
>> but the only message (no errors) is
>> Server terminated successfully.
>>
>
> You can check the /var/log/Xorg.0.log to get some clues
>
>
I have a test machine with an NVIDIA card
2018 Dec 04
3
Dell server dropping packets
Hi All - I have a Dell R430 server running CentOS 7.5 that is dropping
packets on the network. Its connected to Cisco switch at AUTO for the
port. The server reports 1000M on the network. I even changed the setting
for the switch to 1000M full, that did not seem to make a difference either.
What else might I look at as to why its dropping packets? Its mainly 90'ish
percent idle. so not
2008 Jan 10
4
centos command to monitor a process for exit
Is there a command that will monitor a process for exiting (crash or
normal exit) and
then execute another command based on the said process no longer being
active?
Or is there a "wrapper" command that runs a process and when that
process exists
due to crashing or just exiting normally) that another process can be run.
Thanks,
Jerry
2018 Feb 28
3
pid_max
I have two systems both running CentOS 7.4
one shows pid_max as 32768
the other shows pid_max as 49152
Why might that be ? I would have thought they would be the same. I have not
changed them.
Thanks,
Jerry
2017 Nov 13
4
streaming audio
hi All,
I am using 11.25.2 and musing on hold. CentOS 7.4
I am trying to setup a MusicOnHold() streaming audio.
I have one machine I tried this on and it worked. This machine is on the
internet.
I have another machine behind a firewall that does not play.
Both machines installed mpg123.
I have a windows machine behind the firewall that plays the audio stream so
firewall is not the issue.
I
2005 Nov 11
1
usb bluetooth devices anyone???
Jerry Geis wrote:
>/ Has anyone played with usb bluetooth devices on centos?
/>/ I am trying to pair a kensington usb bluetooth device with
/>/ a motorola bluetooth headset and get it to work with a
/>/ softphone.
/>/
/>/ I am not finding how to pair the two devices?
/>/
/
>I would be interested in hearing about any solutions as well. I have
>the same USB bluetooth
2018 Jan 24
3
Running on virtual machine and audio not intelligable
Hi All,
Running asterisk 11.25.3, the /proc/cpuinfo says
Intel(R) Xeon(R) CPU X5675 @ 3.07GHz
lsmod | grep dahdi gives
dahdi_transcode 16384 1 wctc4xxp
dahdi_voicebus 61440 2 wctdm24xxp,wcte12xp
dahdi 225280 11
wctdm24xxp,wcfxo,wctdm,dahdi_transcode,oct612x
dahdi_voicebus,wcb4xxp,wct1xxp,wct4xxp,wcte11xp,wcte12xp
crc_ccitt 16384 2
2019 Dec 03
5
CentOS 7 as a guest VM
I am experiencing an issue that my process does not wake out of a select()
call when a single character is received in an input file descriptor when
running as a VMware guest.
Anyone ever experienced this ?
I can run tshark and see the character arrive, but my process does not wake
up and see that character. Most times it works - but once in a while it
does not.
So I made a change on my code -