similar to: iscsiadm: Could not perform SendTargets discovery: encountered non-retryable iSCSI login failure

Hi, Is it possible to discover iSCSI targets using libvirt API..? OR is it possible to get the similar results of below commands using libvirtAPI..? iscsiadm --mode discovery --type sendtargets --portal server1.example.com sudo iscsiadm -m discovery -t st -p 192.168.0.10 Regards Sijo

Hi, I'm trying to disconnect some iSCSI targets, but can't seem to. [root at localhost ~]# iscsiadm -m session tcp: [1] 192.168.2.202:3260,1 iqn.2011.01.22.freenas.nvr:500gb tcp: [3] 192.168.2.200:3260,1 iqn.2011-2.za.co.securehosting:RAID.thin3.vg0.1tba tcp: [4] 192.168.2.202:3260,1 iqn.2011.01.22.freenas.nvr:extent0 tcp: [5] 192.168.2.200:3260,1

Hello everyone, I have recently installed libvirt 1.0.0 and am having a problem with my iSCSI storage pool's autostarting. They are just going to an inactive state right after a reboot of the host. However once the startup is complete I can manually start the pool without problem. I am getting the following errors in the libvirtd.log file but they don't really give me much as to what

Hi, i have a debian Etch x86_64 with a xen 3.1 on a kernel 2.6.18-xen. I have some DomU with Debian Etch. I installed open-iscsi, configure /etc/iscsi/iscsid.conf: --- node.active_cnx = 1 node.startup = automatic #node.session.auth.username = dima #node.session.auth.password = aloha node.session.timeo.replacement_timeout = 120 node.session.err_timeo.abort_timeout = 10

Hi, How do I setup multiple password protected iSCSI targets on Linux? I know that mounting a password protected iSCSI target requires modify these records with the appropriate values: node.session.auth.username = My_ISCSI_USR_NAME node.session.auth.password = MyPassword discovery.sendtargets.auth.username = My_ISCSI_USR_NAME discovery.sendtargets.auth.password = MyPassword But, now I need

Hello, thanks for the help. Yes And the commands to discovery iscsi results ok Such iscsiadm --mode discovery --type sendtargets And scsiadm -m node -T And the disks appear on pvdisplay 2018-03-14 16:23 GMT-03:00 Marcelo Roccasalva < marcelo-centos at irrigacion.gov.ar>: > On Wed, Mar 14, 2018 at 4:08 PM, marcos sr <msr.mailing at gmail.com> wrote: > > > >

On 12/17/2013 07:13 PM, Marco wrote: > Hi! > > I'm new to libvirt and face problems connecting to an iSCSI target. > What I intend to do is to connect libvirt (I tried virt-manager and > virsh) to an iSCSI target and then boot from the LUNs which contain > the VMs. > > I followed the documentation¹ but got stuck at section 12.1.5.4.3. > > 1) > virsh

On Wed, Mar 14, 2018 at 4:27 PM, marcos sr <msr.mailing at gmail.com> wrote: > Hello, thanks for the help. > > Yes > > And the commands to discovery iscsi results ok > > Such > iscsiadm --mode discovery --type sendtargets > > And > > scsiadm -m node -T > > And the disks appear on pvdisplay Ok. [Try not to top-post] Let's try to read your disks

- dracut does not currently support booting a dmsquash file system on an iscsiroot - can not be configured in standalone mode since networking is not up, although works fine if ovirt-config-setup is run once booted. Signed-off-by: Joey Boggs <jboggs at redhat.com> --- recipe/common-pkgs.ks | 1 + scripts/ovirt-config-boot | 67 ++++++++++++++++----

Hi, When I add a new LUN on an iscsi target and then issue a pool-refresh command on the respective storage pool in libvirt, libvirt will not find the new lun (or notice if luns have been removed). I'm using a Dell PowerVault MD3200i iSCSI Array to hold the volumes for virtual servers in libvirt. In libvirt, I have defined the storage pool as this: <pool type='iscsi'>

Hi! I'm new to libvirt and face problems connecting to an iSCSI target. What I intend to do is to connect libvirt (I tried virt-manager and virsh) to an iSCSI target and then boot from the LUNs which contain the VMs. I followed the documentation¹ but got stuck at section 12.1.5.4.3. 1) virsh pool-define-as \ --name foo \ --type iscsi

Hello, I'm fairly new to centos and to iscsi, I have installed a fresh copy of centos (CentOS release 5 (Final)) and installed iscsi-initator-utils, iscsiadm -V shows iscsiadm version 2.0-865 . when i try to connect to iscsi target it doesnt work ... it just stays idle , i try something like: iscsiadm -m discovery -t st -p 172.20.2.76 show or with -m node .... --login ...etc, none works.

On Mon, Apr 11, 2016 at 9:14 PM, Nathan Coulson <nathan at bravenet.com> wrote: > Hello > > We were attempting to use scsi-target-utils, hosted on a xen dom0 vm using > localhost, and running into some problems. I was not able to reproduce this > on a centos 7.2 server using the default kernel. Have you tried booting the Virt SIG kernel natively and seeing if you can

Package: xcp-storage-managers Version: 0.1.1-3 Severity: normal XCP cannot use iscsi block devices. Fails with iscsiadm: No active sessions. I ran the following commands trying to diagnose the problem: First introducing a SR and then creating a PBD with the needed configuration for the iscsi block device. These steps work fine but when I tried to plug the PBD I got the error: root at

On 2016-04-12 09:43 AM, Nathan Coulson wrote: > By natively, I take it using > kernel /vmlinuz (vs kernel /xen) > > Not yet, but working on setting up such an environment. > > (At this time, I was using virt-install to reproduce the problem, and > the original server we are testing on did not support kvm but the 2nd > server does). > > On 2016-04-12 03:26 AM, George

Hi People Using Open iSCSI I have been able to create and mount multiple iSCSI partitions and have them mount at boot. Now I wanted to setup a situation where one of the visible iSCSI partitions mounts at boot and the other is only available if I manually connect to it. This led me to the following command *iscsiadm -m node -T

Hello, I have a LVM with 2 ISCSI disk mounted. The partition started presents problem such " i/o error". I unmounted the device, and restarted target server in scsi, wich as having some problems. After that i mapped iscsi and trying to mount partition again but: When i run the pvdisplay i get the following erro: read failed after 0 of 4096 at 0: Input/output error And cannot mount

Hello Nathan, dear all, > We were attempting to use scsi-target-utils, hosted on a xen dom0 vm using localhost, > and running into some problems. I was not able to reproduce this on a centos 7.2 > server using the default kernel. I am seeing comparable things on our centos6 xen servers running 3.18 kernels. We have about 20 of those machines running and have started upgrading them from

By natively, I take it using kernel /vmlinuz (vs kernel /xen) Not yet, but working on setting up such an environment. (At this time, I was using virt-install to reproduce the problem, and the original server we are testing on did not support kvm but the 2nd server does). On 2016-04-12 03:26 AM, George Dunlap wrote: > On Mon, Apr 11, 2016 at 9:14 PM, Nathan Coulson <nathan at

Hello, I have been using Xen now for several months and have been quite successful until attempting to utilize iscsi within my domU''s. My research has turned up many posts of people using iscsi with no problems, and I have found no others with the problem I seem to be experiencing. If this has been covered on this list in the past, please accept my humble apologies. Configuration: