similar to: Centos 7 add-on serial cards

Displaying 20 results from an estimated 2000 matches similar to: "Centos 7 add-on serial cards"

2018 Jan 29
2
Centos 7 add-on serial cards
On 01/28/18 20:15, Fred Smith wrote: > On Sun, Jan 28, 2018 at 12:10:29PM -0500, Pete Geenhuizen wrote: >> I'm upgrading from CentOS6 to CentOS 7. >> >> I run 2 weather stations on C6 and have one of them attached to >> ttyS0 which is on the motherboard, and the other to ttyS2 which in >> on an add-on PCI serial card. >> >> I'm migrating the
2006 Jun 23
2
Need help configuring additional serial ports
I installed a 2 port serial PCI card on a system running CentOS 4.3, but I can't get the additional serial ports to work. The card I used is from StarTech (http://www.startech.com/Product/ItemDetail.aspx? productid=PCI2S550&c=US). When it is detected by kudzu, it shows up as a "NetMos Technologies PCI 9835 Multi I/O Controller". I've included the output of
2011 Nov 11
3
COPILOT Glucose Meter COM problem
I am a 62 year old beginner in Ubuntu. Thanks for any help, guidance, suggestions on this problem! I have used commands like the following to be certain that I have an active com port: dmesg | grep ttyS rm com1 ln -s /dev/ttyS0 com1 So I suspect the solution lies somewhere in WINE. If all else fails I will get a USB to SERIAL converter cable and try that. My wife has an Abbott Labs Freestyle
2015 Nov 23
2
Cannot access Patriot Pro II from new system
Hi list, on my previous (lenny or squeeze) machine, I had it up and running, but that machine and configs are gone - and on my new jessie machine (see device and config details below) I cannot start the driver: # /lib/nut/bestups -DDDDD -a Patriot_Pro_II_750 0.000000 debug level is '5' 0.000806 send_to_all: SETINFO device.type "ups" 0.000842 send_to_all:
2003 May 21
6
COM: port problems
Unfortunately, almost all the Windows programs I want to run under Wine need to access the COM: ports, and I cannot get any of them to run. Typically, I get stuff like this ... fixme:comm:EscapeCommFunction16 no cid=0 found! fixme:comm:EscapeCommFunction16 no cid=0 found! err:comm:COMM16_ReadComplete async read failed 000003e3 fixme:comm:EscapeCommFunction16 no cid=3 found!
2018 Jan 29
0
Centos 7 add-on serial cards
On Mon, Jan 29, 2018 at 07:00:02AM -0500, Pete Geenhuizen wrote: > > > On 01/28/18 20:15, Fred Smith wrote: > >On Sun, Jan 28, 2018 at 12:10:29PM -0500, Pete Geenhuizen wrote: > >>I'm upgrading from CentOS6 to CentOS 7. > >> > >>I run 2 weather stations on C6 and have one of them attached to > >>ttyS0 which is on the motherboard, and the
2007 Dec 21
3
CentOS-5 Need Help With Serial Ports
I have been struggling with setting up two serial ports on an HP/Compaq D512S (Intel P4) under CentOS-5. I am not at all sure why these things were not auto-configured when I initially installed the CentOS system from CDs but they were not. I have found various resources on the web and from them uncovered the setserial utility. What I need from somebody is guidance on how to use this utility to
2012 Jan 31
3
Setting up serial ports on kvm guests
CentOS-6.2 We have a dedicated CentOS-5.7 host used for fax reception and transmission that we wish to move to a CentOS-6.2 virtual guest instance. The CentOS-6.2 virtual host has a 4-port serial card installed. lspci -v tshows this this: 03:00.0 Serial controller: Oxford Semiconductor Ltd OX16PCI954 (Quad 16950 UART) function 0 (Uart) (prog-if 06 [16950]) Subsystem: Oxford
2015 Nov 24
0
Cannot access Patriot Pro II from new system
On Nov 23, 2015, at 10:21 AM, Olav Seyfarth <olav at seyfarth.de> wrote: > > I've noticed this tread: > http://lists.alioth.debian.org/pipermail/nut-upsdev/2014-November/006801.html > But unless I misunderstood something, the driver bestups should still > work in jessie, right? It should still work. > Might this be a clable issue? > > The cable is the original
2001 Jul 12
2
wine-20010305 and serial port access
I'm trying to get the Windows-software for my digital camera to work in wine under Mandrake 8.0 (kernel 2.4.3). Installed wine without errors. Had a look at the ~/.wine/config and it looked ok for me. The part concerning the serial ports: [serialports] "Com1" = "/dev/ttyS0" "Com2" = "/dev/ttyS1" "Com3" = "/dev/ttyS2" "Com4"
2009 Aug 06
2
IVT SCD serial port help
guys, A bit off topic here, but since this issue already has a history here: serial connection to the SCD, the never ending story ... - the intel D945GSEJT mainboard (ICH7) has two serial ports with onboard connectors which require a ribon cable to the external DB9 connectors in the case. I tested 5 cables, but none works. whereas I'm not sure if it is a cable problem. this is what dmesg
2007 Mar 09
2
How do I configure additional serial ports?
I have installed two 4-port serial cards (http://www.startech.com/ Product/ItemDetail.aspx?productid=PCI4S550&c=US) on a CentOS 4.4 system. The hardware appears to be recognized correctly, as kudzu added 2 entries to /etc/sysconfig/hwconf and lscpi shows both cards (output of lspci -vv for both cards included at the end of this email): # lspci 00:00.0 Host bridge: Intel Corporation
2010 Jan 08
2
Serial port fun: CentOS 4.8 (32-bit) vs. CentOS 5.4 (64-bit)
I am in the process of migrating from running CentOS 4.8 (32-bit) to CentOS 5.4 (64-bit) on my AMD Sempron(tm) Processor LE-1300 system (it is running CentOS 4.8 32-bit because the disk images are from a previous PIII system), and things are 'interesting' WRT how the Lava Computer mfg Inc Quattro-PCI card is being handled. lspci (on CentOS 4.8 32-bit) yields: 01:0a.0 Serial controller:
2001 Feb 16
2
Serial Port Access
Hi,. I have some legacy applications for MSDOS / 95 and a new NT version of an application that i would like to use. I have un-commented the lines in wine.conf about serial access but i cant seem to get any MSDOS or win32 application to talk, is this currently supported in (the lateset) wine ? regards --- Matthew J Fletcher NPD Firmware When did ignorance become a point of view ? ---
2010 Mar 01
2
pxelinux multiple serial port setting
Hello We have computers which redirect COM2(ttyS1) to SOL(Searial console Over Lan). We have been using pxelinux to boot them with the following pxelinux.cfg/default setting. pxelinux.cfg/default serial 1 19200 console 1 prompt 0 timeout 100 default menu.c32 label Linux Diskless menu label ^Linux Diskless kernel menu.c32 append pxelinux.cfg/linux.menu label Bios Setup
2012 Feb 03
3
Setting up a pci passthrough device
I have been investigating pci pass-through for virtualized guests and the documentation I have found seems to me to lack a certain consistency in its example. This may be due to my not understanding what it is trying to inform me. What I wish to do is to configure a pci multi-port serial i/o card for use by a single virtual host. I start by running lspci -v on the host to identify the serial
2004 Apr 09
1
Sharp ZQ-290s sync software
Hi, Since Sharps communication protocols are "top secret", I'm trying to port their sync software to linux. I'm new to wine, so this might be silly, but after hours of googling and searching for solutions I'm posting this. After installing DCOM98.exe, the Desktop software installed, and it runs. Only problem is it doesn't detect the device connected to the serial port
2018 Apr 03
1
Virsh Domain - Serial port; what does the attribute “port” of the serial node's child “target” do?
Hi all! I want to assign a real serialport to my kvm virtual machine via virsh. When I add the following XML snippet to the domain xml, it gets successfully attached but not as I expected it to happen. <serial type='dev'> <source path='/dev/ttyS3'/> <target type='isa-serial' port='2'> <model name='isa-serial'/>
2001 Sep 25
1
Cannot start Notes Rnext Beta 3
I am using wine release 20010824 on SuSE Linux 7.2 and am having problem starting the notes client. Everytime I start, having used 4 different versions of oleaut32.dll, I keep getting: err:win32:PE_fixup_imports No implementation for OLEAUT32.dll.97 imported from C:\Lotus\Notes\nnotesws.dll, setting to 0xdeadbeef err:win32:PE_fixup_imports No implementation for OLEAUT32.dll.127 imported from
2003 Mar 10
2
AOL on Linux
Hello. I am a newbie to wine. In my local area, the only way to have unmetered access to th internet is to use AOL. After some research on the internet, it gas come to light that some linux users have managed to install AOL's version 5.0 of their software to access AOL. Following these instructions, AOL5 is installed on my computer. The command "wine setup32.exe" was run. AOL5