similar to: Broadcom BCM4352 on Centos 7

On Mon, Dec 11, 2017 at 2:14 AM, Gary Stainburn <gary at ringways.co.uk> wrote: > Hi Folks > > I'm trying to get my internal WiFi working and I'm following the > instructions > here: > > https://wiki.centos.org/HowTos/Laptops/Wireless/Broadcom > > My adaptor is: > > [gary at gary ~]$ lspci|grep Broad > 08:00.0 Network controller: Broadcom Limited

On Monday 11 December 2017 18:50:06 Akemi Yagi wrote: > ?As far as I know, the contents on the CentOS wiki are for CentOS 7.3 (or > earlier) and a patch is needed to use the driver under 7.4. > > You may want to go to the ELRepo article that is referenced on that page ( > http://elrepo.org/tiki/wl-kmod > ? )?. The ELRepo instructions are up to date and should cover EL7.4. >

On Thu, Dec 14, 2017 at 5:39 AM, Gary Stainburn <gary at ringways.co.uk> wrote: > After getting nowhere with the mokutil command I decided to use the other > option and turn off secure boot in the BIOS settings. > > I had been loathed to do this because every time I do anything in the BIOS > it > stuffs the boot order and reverts to booting straight into Win8. Guess >

I have a Broadcom 802.11b/g hardware on my dual-boot laptop. Note first that in the WinXP partition, the wifi makes DHCP connections to my router with no problem. Since this was not working in my new CentOS 6 partition, and remembering that there was a driver problem with the old Fedora partition it replaced, I followed instructions founs at:

Hi, I just installed CentOS 6.6 on my HP Pavilion DM1 laptop. The wireless card is only poorly supported in the default setup, so I decided to write an installation script for the Linux-STA driver, which works perfectly. https://github.com/kikinovak/centos/blob/master/6.x/broadcom-sta/broadcom-sta.sh Grab the files: # git clone https://github.com/kikinovak/centos Run the script: # cd

Hello David, In brief, I've solved this problem on my Dell Inspiron 1525 (with Broadcom 4312 wireless card), so I figured letting You know would be nice, 'cause it didn't seem like the issue is resolved. Visit this link: http://jomcode.com/fadhil/?p=59 and in addition check out the comment on the same page by Andre Kiepe to have the modules load on boot. Best Regards, Milos.

Everyone, I just purchased a new wfi card?that is identified as using lspci as : Broadcom Limited BCM4360 802.11ac Wireless Network Adapter (rev 03) I have not been able to get it to work Centos 7.4 machine. Some of the centos user posts had indicated the nux repsitory had a Centos 7 kmod- wl, but it is not present when I tried to search or or install it at this time. Has anyone had any

Hi, I've been using in the past the broadcom wifi card BCM4322 with Centos 7.1 one in the past, with kernel 3.10.0-229.7.2.el7 and driver 6_30_223_248 and it worked well. Now I updated Centos to 7.2 and the driver is not compiling any more under kernel 3.10.0-327.3.1.el7. Neither driver 6_30_223_238 nor 6_30_223_271. Does any body experienced the same issues? Cheers, Roberto Nebot --

Been experimenting with CentOS 5.4 some more. In order to get my wireless card to work (Broadcom BCM4311) I need Broadcom's wl.ko driver (http:// www.broadcom.com/support/802.11/linux_sta.php). It compiles fine after the necessary modification in typedef.h, loads and wireless works. However, as soon as I put some load on that interface (scp something from another machine, download

Hello CentOS admins. I am an AIX admin bent on learning CentOS. Yesterday I downloaded CentOS-6.5-x86_64-bin-DVD1.iso, burned a DVD and loaded it onto a Lenovo IdeaPad N585 laptop. All went well, except for getting the integrated wireless to work. Here is some info and what I tried so far. # lspci|egrep -i wireless 06:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless

After getting nowhere with the mokutil command I decided to use the other option and turn off secure boot in the BIOS settings. I had been loathed to do this because every time I do anything in the BIOS it stuffs the boot order and reverts to booting straight into Win8. Guess what, as soon as I turned off secure boot it did exactly that. Turnng secure boot back on made no difference.

Hi all, I'm a complete newbie in Linux and am trying to get my Broadcom BCM4313 working in my Lenovo S10-3t netbook (CentOS 6.3 installed from LiveCD). I followed the steps in the wiki, which lead me to ELRepo: wl-kmod. I followed the instructions there until Step 2: $ mkdir -p ~/rpmbuild/{BUILD,RPMS,SPECS,SOURCES,SRPMS} $ echo -e "%_topdir $(echo $HOME)/rpmbuild\n%dist .el$(lsb_release

This is a continuation of my previous thread: "Broadcom Wifi Problem" Following a post from "James A. Peltier", who said: You can use the rpmforge version or compile it yourself. I've used this one with success using the details described earlier. http://www.broadcom.com/support/802.11/linux_sta.php I did however have to patch it with

Good afternoon all, I have a Broadcom BCM5823KPB-5 PCI crypto card that I would like to use on a 2.6.18-164.10.1.el5xen i686 i386 release do assist with crypto operations. Does anyone know if there are drivers for this device? It was originally used in a Cisco Pix to assist with crypto functions under part number 74-3176-01 vac+. The other markings on the board are "CT0527 10"

Le 14/12/2014 15:02, Jonathan Billings a ?crit : > Did you try the drivers provided by elrepo? > > http://elrepo.org/tiki/wl-kmod No. I read the CentOS wiki page here, which states that ELRepo doesn't provide these drivers due to licence restrictions, and that the user has to build them manually. http://wiki.centos.org/HowTos/Laptops/Wireless/Broadcom?action=show :o) Niki --

On Tuesday 19 December 2017 03:56:20 Keith Keller wrote: > On 2017-12-19, Keith Keller <kkeller at wombat.san-francisco.ca.us> wrote: > > https://elrepo.org/tiki/wl-kmod > > I decided to give this a go, and so far so good. I did need to rebuild > the rpm after updating the kernel version from the previous one to the > current one, but from the page above it sounds like

Hello, I noticed that with latest kernel (2.6.32-573.7.1.el6.centos.plus.x86_64), my laptop's Wifi doesn't work, whereas with previous kernel (2.6.32-504.30.3.el6.centos.plus.x86_64), it works fine. Is this a known issue or did I miss something new? BTW, `lspci` says: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01) Regards, -- wwp -------------- next part

On October 26, 2017 6:31:04 PM EDT, Akemi Yagi <amyagi at gmail.com> wrote: >On Thu, Oct 26, 2017 at 3:11 PM, H <agents at meddatainc.com> wrote: > >> On 04/18/2017 12:54 PM, H wrote: >> > A couple of days ago I submitted a request to ElRepo and kmod-jfs >is >> now available for CentOS 7 as well. >> > >> >> Did not have a need to

Hello, The support for Broadcom Corporation BCM4313 802.11b/g/n Wireless is native in the kernel since 2.6.37 (module brcm80211, renamed brcmsmac since 2.6.39). But is it backported to some kernel available for CentOS ? Thanks, -- Philippe Naudin

> -----Original Message----- > From: CentOS [mailto:centos-bounces at centos.org] On Behalf Of Phil Perry > Sent: den 26 september 2017 21:46 > To: centos at centos.org > Subject: Re: [CentOS] Semi-OT: hardware: NVidia proprietary driver, C7.4 > > On 26/09/17 18:40, m.roth at 5-cent.us wrote: > > This is really frustrating. I've got a server with two K20c Tesla