similar to: Display IP addresses on the system console *before* the login prompt.

What does 'man agetty' (or whatever you're using) on the OS in question say? Ubuntu 14.04 doesn't list "\4{<nic>}" as an option and it doesn't work, 16.04 does and it does appear there (might have to press Enter to get a screen refresh). If the OS doesn't support it then you'll have to get creative (send 'ip addr' output to /etc/issue at boot

File Server OS: CentOS 5.3 (x86_64) Kernel: CentOS Plus kernel (need XFS fs drivers) The file server has a Chelsio T310 10GBASE-CX4 RNIC (rev 3) PCI Express x8 MSI-X (eth0), driver and firmware is stock from the CentOS Plus kernel. Using ethtool I have verified driver association with the 3 NICs on the system (eth1 and eth2 are not connected to any switch) Driver for eth0 driver: cxgb3

I can boot from DVD. I deleted kernel. Thought it will fix the problem. Now I can see rescue menu only. Kernel source is there. How to get back kernel. On Friday, November 20, 2015, Arun Khan <knura9 at gmail.com> wrote: > On Fri, Nov 20, 2015 at 2:18 PM, Siva Prasad Nath > <shivaprasadnath21 at gmail.com <javascript:;>> wrote: > > Hi, > > My server not able

On Mon, Aug 29, 2016 at 10:24 PM, Alexander Farber <alexander.farber at gmail.com> wrote: > No, I mean there is sometimes a variable for mail format too: The HTML formatting is a logwatch option, invoked through the logwatch.conf file. -- Arun Khan

On Wed, Aug 31, 2016 at 7:58 AM, Alexander Farber <alexander.farber at gmail.com> wrote: > logwatch is run as cronjob. Let's take cron out of the picture. Invoking logwatch from an interactive shell -- no joy. The report still goes out in text format. -- Arun Khan

Hi, My server not able to boot up. It is hanging after few times. How to repair boot system? I am trying to use grub2-install. Is it necessary to install grub2 on boot device? Please help. Thanks in advance. -- Shiva Prasad Nath 92981134

Hi, I am creating a virtual machine. My laptop is i686 system. Please advice me which Centos verson can be downloaded? With regards, Shiva

I have a client project to implement PCI/DSS compliance. The PCI/DSS auditor has stipulated that the web server, application middleware (tomcat), the db server have to be on different systems. In addition the auditor has also stipulated that there be a NTP server, a "patch" server, The Host OS on all of the above nodes will be CentOS 6.2. Below is a list of things that would be

CentOS 6.5 (AMD64) LDAP DS: via SSSD When I did the OS installation (client site), I had turned the service ON with 'chkconfig sssd on' and 'chkconfig sssd --list' showed that it was ON However, whenever the server has been 'hard' rebooted, 'service sssd status' shows that it is not running. 'chkconfig sssd --list' shows it is OFF! I don't

On Sun, Aug 28, 2016 at 10:56 PM, Alexander Farber <alexander.farber at gmail.com> wrote: > Maybe the format is set in > > sudo crontab -l You mean in the way it is invoked from the cron entry? -- Arun Khan

Greetings, I am looking for a hardware raid card that supports up to 4 SATA II hard disks with hot swap (compatible raid cage) I have short listed two LSI/3Ware cards: 1. 9750-4i 2. 9650SE-4LPML Both appear to be well supported in Linux. I would appreciate your personal experience with the CLI tools provided by LSI. Can they be configured to send email for disk failures or SMART errors? Is

El 2/10/17 a las 22:03, Arun Khan escribi?: > I read up on /etc/issue but adding "\4{eth0}" to the existing string > does not work. > > This works for me in CentOS 7 (in /etc/issue) System IPv4: \4{ens33} You must replace {ens33} with the nic name you want to show. Get it with ifconfig

Posting here in the hope that some one may have encountered problems with recovery from backups on LTO4 media and found a solution. Back ups on FujiFilm LTO4 media (800/1600). Archives created using tar -cf /dev/nst0. ?The tapes were fine when the archives were created (tested by extracting random sample files from them) but something went wrong in storage (no physical damage). Now a few LTO4

Hi list, how to perform a differential backup using rsync? On web there is a great confusion about diff backup concept when searched with rsync. Users says diff because it copy only differences. For me differential is backup from last full backup. Other users says that to perform a differential backup I must include in rsync command: --backup --backup-dir=/some/path but from manual page of

The system is an AWS Instance based on a community CentOS 6.4 AMI snapshot. The vdisk is as follows as shown below [1] The root LVM contains /var/log/ I have attached another block device with ext4 FS. I copied the files from /var/log to this device (mounted on /mnt) and then changed /etc/fstab to mount this device on /var/log on boot. However, I do not see anything being logged in

A client is insisting to install CentOS 6.2 32 bit version [1] on a system with 4GB RAM. Lately, I have done 64 bit installations only; not sure if the 32 bit kernel supports pae for >= 4GB RAM. If anyone knows the answer please let me know (will save me time on an installation in my setup). [1] The Client's ERP vendor has validated the application on the 32 bit platform only thus the

CentOS 6 (amd64) up to date with latest security / bug fixes. The logwatch reports come in plain text even though the config states HTML. <begin /etc/logwatch/conf/logwatch.conf> mailer = "/usr/sbin/sendmail -t" TmpDir = /tmp MailFrom = logwatch at example.com MailTo = admin1 admin2 admin3 Range = yesterday Detail = Medium HostName = www.example.com Print = No Output = mail

CentOS 4.1/bind-9.2.4-2. I have named serving as a cache DNS server plus SOA for a local intranet zone. The problem I am encountering - over a period of time it stops responding to queries. nmap scan from a different host shows port 53 is visible. I can telnet to the port but all queries to server time out. So much so that "service named status" and "service named

Hi all, I would like to install/test CentOS 7.X as a hostap for my home. I am thinking to use an Alfa (http://www.alfa.com.tw) usb wireless adapter or TP-Link. BUt there is not much information in Alfa's or TP-Link's web sites about which of them can run as a HostAP. If I can find any adapter that supports ac with a throughput of 150 Mbps/300Mbps, it would be great. Any recommendation?

I have setup a Zentyal 3.2 Samba4 AD. I am using RSAT to administer the AD server. Windows7 and Linux (CentOS) clients are able to join the AD; uid/gid of directories/files show up as per the definitions in Samba4. With Mac OS X clients, there is a problem. The OS X nodes are able to join the domain (quite a few blogs on this subject). The AD connection shows green button. The AD user is