similar to: sha256sum a dvd

I am experimenting with KVM and I wish to create a virtual machine image in a logical volume. I can create the new lv without problem but when I go to format its file system then I get these warnings: Warning: WARNING: the kernel failed to re-read the partition table on /dev/sda (Device or resource busy). As a result, it may not reflect all of your changes until after reboot. Warning: Unable to

On Mon, Apr 24, 2017 at 12:53:36PM -0400, James B. Byrne wrote: > > CentOS-6.9 > > I am trying to verify a locally created dvd. I am using sha256sum in > this fashion: > sha256sum /dev/sr0 > > Which gave this result: > > sha256sum: /dev/sr0: Input/output error > > > So I tried this: > sha256sum /dev/cdrom > > Which, after some time, also

I would like to burn the cd-rom iso's of CentOS-5.0 on my desktop machine, which is running CentOS-4.5. Is there a site or other reference that can provide me with a detailed, hand held, step-by-step, blow-by-blow description on how to do this for my installation? Regards, -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB at

Hey guys, Thanks a lot for the CentOS 6 distro. I am having trouble burning the i386 dvds. I tried on a RHEL 6 deskop and also a CentOS 5 laptop. The command I am running on both systems is this: growisofs -dvd-compat -speed=4 -Z /dev/sr0=/home/gsgatlin/CentOS-6.0-i386-bin-DVD/CentOS-6.0-i386-bin-DVD.iso The error I am seeing is: :-( /dev/sr0: 2295104 blocks are free, 2297586 to be written!

I have a kvm guest running MS-WinV7 on a CentOS-6.5 host. The WinV7 guest was installed from a CD. It installed correctly and was updated and added to an MS Active Domain without difficulty. I was able to do work on it through the virt-manager console and I was able to shut the system down from the console without problem. I cannot get it to restart however. virsh start

2020-04-17 11:37 skrev Peter Krempa: > [please don't top post] > > On Fri, Apr 17, 2020 at 10:54:24 +0200, Andreas Thörn wrote: >> I’ve tried that post .. but either I get a new scsi passthrough >> controller in device manager, but no dvd or the boot in windows hangs > > Note that you don't have to add a scsi <controller> if you already have > one.

I am still trying without much success to get a desktop on my minimal + virtualization install of a CentOS-6.3 kvm host. When I run startx I get a desktop but other than the icons for computer, home and trash there is nothing displayed. I can right click the mouse and from there I can open a terminal window and creat a folder on the desktop but I have no title bar and no status bar. There are

I would like to create a bootable DVD containing Win7 from an official Microsoft ISO that I have on a CentOS-6.5 box. Is this even possible? If so then how is it done using CentOS? If I must create a Win7 repair disk on a Windows machine then this will be possible, but somewhat logistically challenging. I would much rather just get it done with the tools I have to hand. -- ***

I am trying to put the dvd iso image of CentOS-5.4 onto a DVD. I have an LG multi-writer installed. I have used this device on this host to created CDs in the past but this is my first attempt at creating a dvd. When I put a blank DVD-R media in the drive then I see a desktop icon for "CD-ROM Disc" created. When I open the bittorent folder and click on the iso image

Hello, I installed this game thanks to the DVD. So, when the installer ask me to place the 2nd DVD in the dvd drive, i can eject the first DVD. So, i place the second DVD but after, the DVD is not mounted automaticaly. I tried to launch this command : mount /dev/sr0 /media/cdrom but without success, the dvd2 is always umounted... I can't install completly the game with this problem. Thanks

I’ve tried that post .. but either I get a new scsi passthrough controller in device manager, but no dvd or the boot in windows hangs Either that method won’t work anymore or my config is bad .. im not really sure what to put in controller, target, bus and unit .. Skickat från min iPad > 17 apr. 2020 kl. 08:38 skrev Tony Brian Albers <tba@kb.dk>: > > Hi Andreas, > >

Hello Gentlemen, I would like to ask a question about an issue I have with the Centos 6.3 installation. I have installed a Centos 6.3 on a server we used before with 5.4 on Friday. I have created a KS file to let me connect to the server via VNC and have all repos and packages preconfigured. I only needed to partition the hard drive using VNC. During the partition process I selected which

Firstly, let me thank all of the individuals who assisted me in various matters regarding find, tar and ssh last week. Your contributions were truly invaluable and I learned a great deal thereby. The reason for that brief flurry of activity was an administrative and technical move to store-to-disc from store-to-tape for our server backups. We presently use a mix of store to disc on

Dear All I tried to mount an external cdrom on my CentOS 5 server but un-successful . I attached the device to my USB port and then the followings have been added to my /dev folder : "cdrom -> scd0 cdrom-sr0 -> scd0 cdrw -> scd0 cdrw-sr0 -> scd0 cdwriter -> scd0 cdwriter-sr0 -> scd0" To this end , I tried to mount it as the followings (but it didn't get through) :

Package: xen-utils-common Version: 4.0.0-1 Severity: normal This is an offshoot of Bug#588888, but is really a separate issue. It appears that with hvmloader, the disk device names presented to the vm must by from a specific set that hvmloader knows how to emulate. Names like hd[a-c] and sd[a-c] work, but sr0 does not. While this makes sense, when you think about what hvmloader is doing, it is

I need to work on a host which has been offline and powered down for some time. I has CentOS-6.9 installed. At some point it had two nics, one on the motherboard (still present and working) and one as an expansion card. When booted the console displays: pciehp 0000:00:1c:0:pcie04: Failed to check link status repeatedly. How do I tell the host to ignore the missing nic or remove it from the

<!-- @page { size: 8.5in 11in; margin: 0.79in } P { margin-bottom: 0.08in } --> I'm having a problem mounting my new CDRW DVD in my new machine I just built. The motherboard is an Intel DP35DP, and I connected the CDRW DVD via ribbon cable into the motherboard IDE slot. Centos 5.1 is installed and functioning fine so far (other than this problem). I can't mount the

Problem has been solved: "sudo mount -t iso9660 /dev/cdrom /mnt/cdrom -o" mounted the drive after adding "mount /mnt/cdrom" to /etc/festab. ----- Original Message ---- From: Pam Astor <pamastor at yahoo.com> To: centos at centos.org Sent: Monday, March 17, 2008 1:45:16 PM Subject: [CentOS] CDRW-DVD Mount Problem, Centos 5.1, Intel board... <!-- _filtered

I'm having trouble installing a program from the CDROM / DVD drive. I've checked to see that the mapping of the d: drive is correctly pointing to the right place - it is: ~/.wine/dosdevices$ ls -l total 0 lrwxrwxrwx 1 cosmo cosmo 10 2009-10-04 18:46 c: -> ../drive_c lrwxrwxrwx 1 cosmo cosmo 13 2010-08-12 20:19 d: -> /media/cdrom0 lrwxrwxrwx 1 cosmo cosmo 8 2010-07-25 19:12 d::

Where can I find a list of the options and their usage and meanings for the contents of this file? Regards, -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB at Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada