similar to: DNAT Internet gate problem on centos

Actually, I know what the MAC is for the builtin Port1 and 2. Those are listed in the BIOS. But ultimately I don't want to rely on them as I want the same kickstart file to work for other machines, so hardcoding those in the kickstart file wouldn't quite work, unless I start writing multiple kickstart files, one per machine. Anyway, lspci reports this: 00:19.0 Ethernet controller: Intel

I want to capture all my Asterisk traffic (including RTP) and then analyse it. My plan was to use tcpdump and then analyse with Wireshark. The following works: tcpdump -i eth0 -s 0 -w /tmp/tcpdump.1 But I want to be a bit more selective: tcpdump -C 100 -W 10 -w /tmp/tcpdump -i eth1 -s 0 udp and dst port >= 5060 This doesn't capture the RTP traffic. Could anyone advise what I'm

When I was working on this last time (with the r8169 driver), someone on this list provided the following script which is what "fixed" the issue at the time by creating a new 70-persistent-net.rules file with the devices enumerated in order. However, this no longer works now. echo "[KICKSTART] Binding eth interfaces to the expected MAC address in UDEV" echo "## Created by

Right, I understand that part. However I believe I'm now in the realm of making this specific to this machine as I have no guarantee that another identical machine will pop up with those same bus IDs. Maybe for the internal ports, but I don't know if the same will happen for the PCIe bus. Would that be correct? On Thu, May 14, 2015 at 6:21 PM, Kahlil Hodgson < kahlil.hodgson at

On Thu, Dec 13, 2018 at 08:25:32PM -0500, Lyude Paul wrote: > The current way of handling refcounting in the DP MST helpers is really > confusing and probably just plain wrong because it's been hacked up many > times over the years without anyone actually going over the code and > seeing if things could be simplified. > > To the best of my understanding, the current scheme

On the GATE it works. (Port mapping)

So I'm back to this problem. A quick run down of what the original problem was: I have a machine that I'm configuring to use kickstart to setup. It has two builtin ethernet ports (labeled ports 1 and 2) and I'm adding a third one on its PCIe bus. Originally I was using an r8169 clone a default kickstart always put it as eth0 with the builtin ones as eth1 and eth2 respectively. After

This is the series I've been working on for a while now to get all of the atomic DRM drivers in the tree to use the atomic MST helpers, and to make the atomic MST helpers actually idempotent. Turns out it's a lot more difficult to do that without also fixing how port and branch device refcounting works so that it actually makes sense, since the current upstream implementation requires a

This is the series I've been working on for a while now to get all of the atomic DRM drivers in the tree to use the atomic MST helpers, and to make the atomic MST helpers actually idempotent. Turns out it's a lot more difficult to do that without also fixing how port and branch device refcounting works so that it actually makes sense, since the current upstream implementation requires a

On Tue, Dec 18, 2018 at 04:27:58PM -0500, Lyude Paul wrote: > On Fri, 2018-12-14 at 10:29 +0100, Daniel Vetter wrote: > > On Thu, Dec 13, 2018 at 08:25:32PM -0500, Lyude Paul wrote: > > > The current way of handling refcounting in the DP MST helpers is really > > > confusing and probably just plain wrong because it's been hacked up many > > > times over the

Hi, I want to use this qemu command '-object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on' with libvirt but i can't find the 'mem-path' and 'share' in the documentation. because the vhost-user backend based on 'share=on' parameter and libvirt support vhostuser i guess there maybe another way to support this parameter? this is my xml:

This is a WIP version of the series I've been working on for a while now to get all of the atomic DRM drivers in the tree to use the atomic MST helpers, and to make the atomic MST helpers actually idempotent. Turns out it's a lot more difficult to do that without also fixing how port and branch device refcounting works so that it actually makes sense, since the current upstream

This is the series I've been working on for a while now to get all of the atomic DRM drivers in the tree to use the atomic MST helpers, and to make the atomic MST helpers actually idempotent. Turns out it's a lot more difficult to do that without also fixing how port and branch device refcounting works so that it actually makes sense, since the current upstream implementation requires a

This is the series I've been working on for a while now to get all of the atomic DRM drivers in the tree to use the atomic MST helpers, and to make the atomic MST helpers actually idempotent. Turns out it's a lot more difficult to do that without also fixing how port and branch device refcounting works so that it actually makes sense, since the current upstream implementation requires a

This is the series I've been working on for a while now to get all of the atomic DRM drivers in the tree to use the atomic MST helpers, and to make the atomic MST helpers actually idempotent. Turns out it's a lot more difficult to do that without also fixing how port and branch device refcounting works so that it actually makes sense, since the current upstream implementation requires a

Here''s my situation: I''ve got an Intel machine running a 2.6.9 linux kernel and this box has 4 modems attached to it via a usb to serial port expander. In order to force data down each of the modems, some pretty simple rules are used and they are as follows: iptables -t mangle -A OUTPUT -p tcp --dport $PORT1 -j MARK --set-mark 1 iptables -t mangle -A OUTPUT -p tcp --dport

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all! This is my first message to the list/newsgroup. This weekend and after to have fought by some time with my soundcard with respecto to the voice capture, after assuring to have solved that problem, I installed Asterisk on Debian GNU/Linux Lenny. I made my installation on a KVM virtual machine. In order to begin and according to I could see

Anyone have the 7970 xml config for sip yet? Aaron

Hello, Is it possible, for testing, to connect an cat5 straight patch cord between 2 ports of a Digium B410P card and use these 2 ports as a normal dahdi trunk ? I've tried this: One port is set as NT, the other as TE. I would expect timing to come for system hardware so I choose in /etc/dahdi/system.conf : span=1,0,0,ccs,ami span=2,0,0,ccs,ami Results: - both ports lights are green -

Hello, Sorry, I know the topic has been talked about already but I searched the archives and I'm still unsure of the proper way to have dovecot (imap-login) listen to several addresses and/or several ports. 1. how do I translate dovecot-1 protocol imap { listen = xx.xx.xx.xx:143 yy.yy.yy.yy:143 ssl_listen = xx.xx.xx.xx:993 yy.yy.yy.yy:939 } I started by service imap-login {