similar to: Airprint to old printer using Centos server

Once again I am building a headless Centos 7 box that needs to reliably be on both the LAN and WIFI network at all times. Amongst other things it's going to be an AirPrint bridge enabling IPads to print to printers on a different VLAN. I have asked about this before and got a solution working using nmtui to set up both the LAN and WIFI interface, and activate them. However, the WIFI

Hi Gary I got this working in a previous role a while ago: http://thirdlineit.blogspot.co.uk/2011/12/active-directory-authenticated-airprint.html (ignore the authentication aspects). I also managed to do it recently on my home network using Ubuntu, so the principle still works. Summary: 1. Install CUPS 2. Enable IPP for the printer queues 3. To make the printers visible across

On Fri, Jan 13, 2017 at 12:33 PM, Gary Stainburn <gary at ringways.co.uk> wrote: > > > Also, it was suggested that I use nmcli in a cronjob to re-activate it if > it > drops. I can check to see if it's still active by 'grep'ing the IP > address, > but I don't know the nmcli to re-activate an existing WIFI connection. > > Can anyone help here too,

A few weeks back I built a new Centos 7 server from a 4 year old workstation PC, and a brand new HDD. This PC had no prior problems other than it ran Windows 7. Thew new HDD is because I'm planning to also use it as a Bacula storage device. For the moment is purely an AirPrint server, using CUPS and Avahi so is ide 99.9% of the time. My priblem is that twice now it has turned itself off,

On 31/10/2016 10:43, Gary Stainburn wrote: > Hi folks, > > I've found a number of articles on setting up a Linux / CUPS / Avahi server to > allow airprinting, but they all seem to be quite old. > > Two questions: > > 1) Does anyone have a link for a more recent article, hopefully specifically > for Centos7. I've not seen specific instructions for CentOS 7, but

You could say the same thing about computers in general: I hate them, they automated many tasks in life and took many jobs out of the market!. Eliezer ---- Eliezer Croitoru Linux System Administrator Mobile: +972-5-28704261 Email: eliezer at ngtech.co.il -----Original Message----- From: CentOS [mailto:centos-bounces at centos.org] On Behalf Of Gary Stainburn Sent: Monday, January 16, 2017

Hi Folks I'm trying to get my internal WiFi working and I'm following the instructions here: https://wiki.centos.org/HowTos/Laptops/Wireless/Broadcom My adaptor is: [gary at gary ~]$ lspci|grep Broad 08:00.0 Network controller: Broadcom Limited BCM4352 802.11ac Wireless Network Adapter (rev 03) [gary at gary ~]$ However, I've failed at step 2 as I cannot find any Linux / STA /

We are receiving LOTS of emails that contain empty XLS or DOC documents with embedded virus macros. These are getting past SPAMASSASSIN, Clamav and Kaspersky. I'm trying to write a filter for EXIM to block these emails but I need to know a good, quick, command-line to detect an empty doc with a macro. Is there anything available that I can use?? I have managed to write a PERL script to

I've got a very small footprint rack server with a 4TB drive in that I wish to be a Bacula storeage device. However, it's got an old board / processor in it. Can anyone recommend a Dist that would work on it?

I've also tried adding the pgsql and mysql RPM's and they're not available either. On 20/03/2023 12:58, Gary Stainburn wrote: > Apologies.? This is the correct screen grab. > > The extra errors in the OP were because I had been experimenting, to > try to fix the issue. > > [root at testsvr ~]# ./ldapAuth.php gary.stainburn fake-password > PHP Fatal error:?

On Thu, Dec 14, 2017 at 5:39 AM, Gary Stainburn <gary at ringways.co.uk> wrote: > After getting nowhere with the mokutil command I decided to use the other > option and turn off secure boot in the BIOS settings. > > I had been loathed to do this because every time I do anything in the BIOS > it > stuffs the boot order and reverts to booting straight into Win8. Guess >

On Wednesday 26 August 2015 20:11:20 g wrote: > so the only harm is spam, which i now have going to my Junk folder. > That is not the only harm. These people are very good and very effective confidence tricksters and are experts at getting vulnerable people to send them money which they usually cannot affort to lose in the first place.

On Tuesday 19 December 2017 03:56:20 Keith Keller wrote: > On 2017-12-19, Keith Keller <kkeller at wombat.san-francisco.ca.us> wrote: > > https://elrepo.org/tiki/wl-kmod > > I decided to give this a go, and so far so good. I did need to rebuild > the rpm after updating the kernel version from the previous one to the > current one, but from the page above it sounds like

On Tuesday 27 January 2015 06:43:13 Andrew Bartlett wrote: > You will need to define your 150 users on your server, give them Samba > passwords and give them access to those shares via standard unix groups > and group permissions on the share folders, or (less preferred) the > valid users entry in smb.conf. > > I hope this helps, > > Andrew Bartlett Hi Andrew, That is

On Thursday 29 October 2015 20:37:03 Ned Slider wrote: > On 29/10/15 10:51, Gary Stainburn wrote: > > On Wednesday 28 October 2015 21:12:19 Ned Slider wrote: > >> On 28/10/15 11:55, Gary Stainburn wrote: > >>> We are receiving LOTS of emails that contain empty XLS or DOC documents > >>> with embedded virus macros. These are getting past SPAMASSASSIN, >

Am 27.11.2015 um 16:53 schrieb Gary Stainburn <gary at ringways.co.uk>: > Since posting my first email I have re-generated both the root and Manager > passwords and re-run the setup. > > I no longer get the "Invalid credentials" error so presumably the problem must > have been a cut/paste issue. > > I now get the following error. As I am a total newbie to

On Monday 11 December 2017 18:50:06 Akemi Yagi wrote: > ?As far as I know, the contents on the CentOS wiki are for CentOS 7.3 (or > earlier) and a patch is needed to use the driver under 7.4. > > You may want to go to the ELRepo article that is referenced on that page ( > http://elrepo.org/tiki/wl-kmod > ? )?. The ELRepo instructions are up to date and should cover EL7.4. >

Hi all, I can't believe that I can't find the answer to this one. I have a perl script which is called by xinetd. I want that perl script to be able to detect the remote IP address of the caller. I presumed that it would be an environment variable but I could be wrong. I've found reference to the ENV and PASSENV arguments for xinetd.conf but no examples, and no indication of what

Me again, I'm still building my new mail server and I'm struggling getting clamav and exim to talk to each other. I've installed: clamav-server-0.98.7-1.el7.x86_64 clamav-lib-0.98.7-1.el7.x86_64 clamav-0.98.7-1.el7.x86_64 clamav-milter-0.98.7-1.el7.x86_64 clamav-data-0.98.7-1.el7.noarch clamav-update-0.98.7-1.el7.x86_64 clamav-milter-systemd-0.98.7-1.el7.noarch

Hi Paddy, I was suspecting the same, and from the output below I think you're right. However, I was hoping I could just repair this problem for now, and worry about replacing the HDD later. I need to resume some services that also seem to generate this same error. Gary [root at zeppo services]# ll /usr/lib64/python2.7/lib-dynload/itertoolsmodule.so -rwxr-xr-x. 1 root root 61976 Sep 15