similar to: [OT] How to recover data from an IDE drive

While IDE-to-USB is probably the easier option to use, I got an IDE-to-Sata adapter on eBay for almost nothing (of course, you have to wait for it to arrive directly from China). If you go this route, the thing I learned from the experience was to set the IDE drive to master (there won't be a slave unless you get a one-to-two converter - I didn't see one of the latter). Also, unless the

On 10/26/2016 6:01 PM, TE Dukes wrote: > As some may recall, I suffered a hardware failure of a 10 yr old IBM > Netvista back in January. I was backing up my personal data, 'My Documents', > to my CentOS server but I apparently didn't get my emails. > > It was a main board failure and I believe the data is still good on the hard > drive. Only problem, its an IDE drive

On 26/10/16 09:01 PM, TE Dukes wrote: > Hello, > > As some may recall, I suffered a hardware failure of a 10 yr old IBM > Netvista back in January. I was backing up my personal data, 'My Documents', > to my CentOS server but I apparently didn't get my emails. > > It was a main board failure and I believe the data is still good on the hard > drive. Only

On Thu, Oct 27, 2016 at 09:19:23AM -0500, Leroy Tennison wrote: > While IDE-to-USB is probably the easier option to use, I got an IDE-to-Sata adapter on eBay for almost nothing (of course, you have to wait for it to arrive directly from China). If you go this route, the thing I learned from the experience was to set the IDE drive to master (there won't be a slave unless you get a

Hello, I have been having problems using kernels since 2.6.9-34.0.2. After updating to a new kernel, my system runs, I'm guessing, 6 - 8 hours fine, then becomes unresponsive. For example, I installed the latest kernel the other evening, reboot for the changes and by morning, the system appears to be locked up. Typing 'yum update' takes about 10 minutes to execute. Not sure whats

I would like to upgrade my system to a 64 bit machine. I'd like to find a bare bones platform to build on. I'm not looking to spend a lot of money on this as it is a home system. I looked on the CentOS sponsor page but only saw hosting services. I haven't kept up with hardware in years so I'm dumber than dirt on what's out there. I would prefer a desktop so I can stack it.

Does anyone know of a card that actually works with CentOS 4 that supports Raid10? I don't think CentOS support software raid 10 from the installer. Thanks, -Drew -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20050812/ab215629/attachment-0002.html>

Hello, I am having problems with video in X. I get an over frequency issue using the stock CentOS 4.2 driver. I have searched IBM and Intel for the driver but no luck. Occassionally I see something about need to load a kernel module for agpgart. How do I do this? Anyone have a similar setup or know where I can find the driver? TIA

I've got an odd situation that I need some advise on. I have two computers that I am planning to use as a cluster. I initially started with some left over Compaq Presairos with 667MHz CPUs. I loaded CentOS 4.3 and later updated to 4.4. Things ran normally, albeit slowly. I had an opportunity to upgrade to a pair of IBM Netvistas with 2.26 GHz CPUs, I did this by transferring the

Hello everyone, I''m totally new to Xen and trying to run it on some platforms (x86, x64) using SLES (that is what I have to use for reasons other than technical). Several machines on which I tried using Xen simply fails to run normally using Xen kernel: either network communication is not functioning at all despite proper configuration (that works on non-Xen kernel), or the kernel

Here is what I've ordered for the new system: Case: Antec TX1050B, Mid-Tower Server Case MoBo: Intel D945GCL CPU: Intel Pentium-4 631 RAM: Aeneon 512 Mb 240-pin DDR2 SDRAM DIMM - DDR2 667 Disk: Hitachi 80 Gb SATA 3G Carrier: Vantec MRK-200ST-BK DVD: got one on the shelf I'm going to try Floppy: Sony MPF920-Z-121 My intention is to load CentOS-4 complete and use the

I'm using the same CD's that I've used to install CentOS on my other systems. After the first failure I had the installation verify the install media just in case. It passed. I've tried the default install (used for all previous installs) and the i586 option (after googling). They both fail in the same way. Here is a transcript of what is output to the screen: Running

Hello, I have an old IBM Netvista. Lately, it would seem to go into sleep mode but I have all that disabled. I would have to power off to wake it up. Now I think its done. I can't even get to the CMOS/BIOS. The power light is on but no beeps or anything spinning up. I have two of these Netvistas and had put on away when I upgraded one of the machines. I pulled the HD from it and installed

Hello, While shopping for another 3Ware card, I found that this market has gotten much larger since I bought my 6500. So I started looking at the various cards while browsing the hardware notes for FreeBSD 4.8 and 5.1. So I'm wondering if anyone can provide some insight here. -3Ware has a whole new series of cards. The twe(4) manpage states that only 5xxx and 6xxx series cards are

Hello Since I got the IBM Netvista to boot Linux, and am still waiting for the Compact Flash cards that I ordered, I was wondering if someone knew of an Asterisk distribution that can run on that kind of diskless host? I've taken a look at AstLinux and AskoziaPBX, but they both seem to be meant to be installed on a solid-state medium instead of RAM. For instance, the Netvista is unable to

First off I am a linux / CentOS newbies so go easy on me. Just curious if anyone out there is running Nagios on CentOS 4.5. I have now installed it on a second server due to issue but the issues have come back to haunt me. The OS is running on an IBM NetVista. Every thing in both installs is identical as are the problems. Once I have Nagios up and monitoring every thing hangs. Even a terminal

+1 or bad capacitors, look on the board and make sure none are leaking or puffed out. On Jan 4, 2016 6:08 PM, "David Both" <dboth at millennium-technology.com> wrote: > Power supply > > On 01/04/2016 07:03 PM, tdukes at palmettoshopper.com wrote: > >> Hello, >> >> I have an old IBM Netvista. Lately, it would seem to go into sleep mode >> but I

Looking at the Dell PowerEdge 440SC web page for Colombia. The box will have two 250 GB SATA drives. The HD controller is: SAS 5IR SAS,Internal Raid Adapter (SAS5IR) for HD Configuration) the options are: (1) Add-in SAS5iR (SATA/SAS Controller)-RAID 0 (ASASR0) (2) Onboard SATA, 2 Drives connected to Onboard SATA Controller No RAID (MST2) (3) Add-in SAS5iR (SATA/SAS Controller) which supports

I ran into a puzzling minor behaviour I would like to understand. Reading in a csv file, I find an extraneous "." after a column header, "in" [short for "inches"] thus, "in.". Is this due to "in" being reserved? I initially blamed this on RStudio or to processing the data through LibreCalc. However, the same result occurs in a console R session.

On Mon, January 4, 2016 6:18 pm, John R Pierce wrote: > On 1/4/2016 4:03 PM, tdukes at palmettoshopper.com wrote: >> Hello, >> >> I have an old IBM Netvista. Lately, it would seem to go into sleep mode >> but I have all that disabled. I would have to power off to wake it up. >> Now I think its done. I can't even get to the CMOS/BIOS. The power light >> is