similar to: setting up incoming PPP on centos 4.4

Hi there, As the subject says, I'm trying to set up an HP OfficeJet 5610 on CentOS 4.4 for shared use across my machines. I've managed to get printing (through HPLIP/ CUPS/ SAMBA) and scanning (through SANE) shared; but I'm unable to get fax shared working. Is it possible to do that? The instructions on the HPLIP page talk about installing the 5610 as a fax device and then faxing

Hi, For the project I've used the Eicon DIVA card. It has 8 BRI ports, and for about 25% of the time there are 7 or 8 in use. So we want to replace it with an E1 card. Only issue is, replace it with what? The idea we have been playing with was to get a Digium E1 card (we already have bought lot of Quad E1 cards :-) and then just put it back to back against Asterisk server. And instead of

Alex, thanks for your soon answer, but in case I want to configure PPP on this server, what files do I have to configure? Can I login in this server using SSHD over a PPP conection? Regards; Israel > Just terminal access -> I want to login in my linux server connecting > through the modem connected in /dev/ttyS0 Not sure if this is complete. Install mgetty if not already present on

Dear All, Has anyone come up with a decent faxfilter script that actually works when use Samba + Mgetty/Sendfax. I can print to Samba printers from Windows with no problems, and I can use the faxspool command to send postscript files as faxes from a Linux box. The only part I can't get to work is the vital link between the Samba printer and

Newbie question: I have successfully set up a samba server for file & print sharing. What I'm not sure about is how to set up a fax server. Has anyone tried to do this? What all do you have to do, or maybe you could just point me in the right direction. =========================================== Charles Lewis, Director of Administrative Computing Southwestern Adventist University,

Not sure where to ask this, I've been googling and not finding much that is helpful. At work I've got a multi-threaded program targeted at Linux. It compiles on RHEL 2.1 and 3, and is targeted at 2.1, 3, and 4. UP until today, the binary built on 3 has worked fine on 4. But on RHEL4 update 4 it dies a horrible death in pthread_create. I have reproduced the problem on Centos 4.4, where I

I should start off by saying that I know a lot more about linux than I do z/series hardware.... I've tried centos 3.3 and 4.4 for s390 and s390x, if it make any difference.... Trying to install 4.4 on an lpar on a z9-BC and having trouble figuring out how to get the OSA adapter working. I've been told that when I ftp-boot from the iso image, I should choose "eth" for

Hello any help would be cool.. ./configure --enable-application=browser looks like its good then get an error after the compile configure: warning: Recreating autoconf.mk with updated nspr-config output after make. I get /usr/bin/ld: nsCOMPtr.o: relocation R_X86_64_PC32 against `nsGetServiceByCID::operator()(nsID const&, void**) const' can not be used when making a shared

Hello, I see manage of firewall in CentOS (called security), and seems difficult to manage, not enough powerful. I am searching a middle term between scripts of iptables to manage and Security manager of CentOS. I know FireStarter, another similar? -- Devel in Precio http://www.pas-world.com

I want to install centos 4.4 in a CF card and use a ram disk for operations. It means no hard disk attached to the computer. The machine will only run an antispam antivirus gateway. What documents can I read to make /var and /tmp sit on a ram disk and boot the operating system in read write and switch to read only after booting? thanks, --

Wow! With all the conversations here, and some things on my system, I am seriously thinking of taking another drive, install 4.4 on it, and then move my /home partition (I planned for such eventualities by putting /home on its own partition). Couple of questions: I did my current build with a ks.cfg on a floppy. Can I use the same information for 4.4 as I did for 4.3? That is none of

Hi, I'll need to buy a new wireless card. I need a recommendation for PCMCIA wireless card that simply works with CentOS out of the box. By "works out of the box", I mean that it doesn't need ndis wrapper (or whatever it is called), kernel hacks, or whatever. Thanks

Hi Not entirely centos related but that what the boxes are running so here i go ;) 2 of our centos boxes run nagios for network monitoring and send email and paging alerts and are connected to standard phone lines using modems to send the pages. I'm looking for a way in the event of provider failure to login to these machines and so am looking at the ability to connect to the console over

Hello, I am a Slackware user who's interested in learning CentOS. At this point it is for intellectual curiosity only and not for any real work so the machine need not be 100% stable at this point. It's most probably going to be an installation into VMWare. Given that, I thought I'd wait for 5-beta (mid-Jan'07) and start with that. Will it be possible to upgrade from 5-beta

Hi Friends, I have an Excalibur 4GB USB Pen Drive Model Number EXC4. I think it is getting detected by the Centos but I am not sure about the mount point or the device point it is taking /dev/s?? Logs from /var/log/messages. Mar 11 11:30:06 l_l_box kernel: usb 1-1: USB disconnect, address 3 Mar 11 11:30:22 l_l_box kernel: usb 1-1: new high speed USB device using address 4 Mar 11 11:30:22

I tracked down a createrepo rpm "for RHL 7.x, AS 2.1" etc (hosted by Dag), but it's uninstallable. Eventually I managed to create an rpm from the source (actually, that's fairly easy when onw knows to say "python2"), but python-urlgrabber has completely defeated me. According to Dag, the problem is that "upstream" doesn't see the need to support

Hi, Does CentOS 5 / RH 5 ship with a similar windows active directory and able to support windows workstations? I've of heard OpenLDAP and FDS. Does windows support those? regards

Dear All Please be informed that I checked for the presence of internal modem on my CentOS server , as the followings : #dmesg |grep -i modem #lspci |grep -i modem #lshw |grep -i modem According to the output , it seems that my CentOS client does not contain internal modem . So I decided to add external USB modem and make use of an PCAnyWhere like application that enables for Remote PC Access .

Hi Guys, I'm creating an ldap server for my network. I'm quite confuse about /etc/ldap.conf and /etc/openldap/ldap.conf files. What are the difference of those two config files? Thanks! cheers, kintaro Oe --------------------------------- Need Mail bonding? Go to the Yahoo! Mail Q&A for great tips from Yahoo! Answers users. -------------- next part -------------- An HTML

Which is better? Why? I know yum is the official update mechanism here and in Fedora Core, but that doesn't make yum better than up2date any more than Windows NT was better than OS/2. Let's try to keep the discussion objective:-) I'm asking, hoping for some insights into why RH might (apparently) be moving to yum in preference to up2date (yum is now used within Anaconda). Other