similar to: CentOS-6.8 PCI Hwdr issue?

Sorry to duplicate my issues onto the list - I thought I had looked through this thread before and seen a different error, but apparently Adam and I are running into much the same thing. I'm seeing exactly the same "Failed to assign device to IOMMU" along with the "Device not owned by PCI Back End or pci-stub" in these scenarios. I have not gone back to previous versions,

I obtain this error when booting (xen/stable-2.6.31.x|xen/master) on Xen 3.4.2 x86_64 xen_major : 3 xen_minor : 4 xen_extra : .2 I had no errors with the same kernel, version of the day 2010-03-03 To compile the kernel i use this configuration " http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.31.6-pvops-dom0-xen-master-x86_64 "

I have installed two 4-port serial cards (http://www.startech.com/ Product/ItemDetail.aspx?productid=PCI4S550&c=US) on a CentOS 4.4 system. The hardware appears to be recognized correctly, as kudzu added 2 entries to /etc/sysconfig/hwconf and lscpi shows both cards (output of lspci -vv for both cards included at the end of this email): # lspci 00:00.0 Host bridge: Intel Corporation

we have just upgraded to xen4.0+kernel2.6.31.13. however, we fonud that disk offline in high disk IO(xen4.0+kernel2.6.31.13). but whitout xen4.0, we only start with kernel2.6.31.13, the disk offline didn''t happen. I think it is a bug. test case: 57 physical machine we start 5 vm(cpu:2, memory:1024) in a physical machine.at the same time we do decompression in dom0. tar xzvf *.tar.gz tar

# lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation 5520 I/O Hub to ESI Port [8086:3406] (rev 22) 00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 [8086:3408] (rev 22) 00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 [8086:340a] (rev 22) 00:05.0 PCI bridge [0604]: Intel Corporation 5520/X58 I/O Hub PCI

On 7/30/2016 6:56 AM, Fawzy Ibrhim wrote: > # lspci -nn > 00:00.0 Host bridge [0600]: Intel Corporation 5520 I/O Hub to ESI Port [8086:3406] (rev 22) > 00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 [8086:3408] (rev 22) > 00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 [8086:340a] (rev 22) >

Greetings, I''m attempting to do gfx_passthru with the primary graphics adapter (03:00.0), passing it to a guest. I can unbind it from the host but when I fire up the guest OS my monitor loses signal from the graphics card and that''s that. The GFX card is dual DVI, I''ve tried both slots. Host is Linux 2.6.32.14-1.2.105.xendom0.fc12.x86_64, Guest is Windows 7. PC is an

On 7/28/2016 3:41 PM, Fawzy Ibrahim wrote: > LSI SATA MEGARAID 95Q9 afaik, the megaraid cards are mostly all SAS, which support SATA drives, except very old ones were SCSI. Ok, I do see they had a series of MegaRAID SATA 150-xx and 300-xx cards, these were 64 bit PCI or PCI-X cards. 95Q9 does not appear to be a valid card number, 9240, 9260, 9280 are some pci-express SAS MegaRaid

Package: linux-2.6 Version: 2.6.32-26~bpo50+1 Severity: important --- Please enter the report below this line. --- I've installed the following packages an lenny, which are working well on other maschines. # dpkg -l | grep xen | grep bpo ii libxenstore3.0 4.0.1-1~bpo50+1 Xenstore communications library for Xen ii linux-image-2.6.32-bpo.5-xen-686 2.6.32-26~bpo50+1 Linux 2.6.32 for modern

Oh yes you can run XEN on VB. I am running the following config: ========= GUEST ========= [root@xenserver ~]# cat /etc/issue Citrix XenCloudPlatform Host 0.1.1-25823p [root@xenserver ~]# uname -a Linux xenserver 2.6.27.42-0.1.1.xs0.1.1.737.1065xen #1 SMP Fri Jan 15 16:20:16 EST 2010 i686 athlon i386 GNU/Linux ======== HOST ======== OS Name: Microsoft Windows 7 Ultimate OS

At ~07:40 (UTC-4:00) this morning our gateway host lost its WAN Ethernet adaptor. Subsequent to recovery, which required a reboot, the following entries were find in /var/log/messages: Jun 6 07:39:50 gway02 kernel: PING_FLOOD: IN=eth0 OUT= MAC=00:25:90:61:74:c0:00 :24:14:2b:f2:80:08:00 SRC=74.205.112.125 DST=216.185.71.33 LEN=64 TOS=0x00 PREC= 0x00 TTL=50 ID=30954 PROTO=ICMP TYPE=8 CODE=0

I need to work on a host which has been offline and powered down for some time. I has CentOS-6.9 installed. At some point it had two nics, one on the motherboard (still present and working) and one as an expansion card. When booted the console displays: pciehp 0000:00:1c:0:pcie04: Failed to check link status repeatedly. How do I tell the host to ignore the missing nic or remove it from the

We are in the process of migrating one of our embedded apps to use uart by default instead of sio in RELENG_7 in prep for the day when sio eventually disappears. Unfortunately, the application doesnt want to work with uart with puc backed devices, but still works with sio. Stranger still, the app works with the uart driver when uart attaches to the built in com port on the isa bus. However,

+cc: ocfs2-devel, sunil Marek, Thanks for the detailed report! Can I trouble you to file a bug at http://oss.oracle.com/bugzilla ... oh, is that your report http://oss.oracle.com/bugzilla/show_bug.cgi?id=1339? This looks like a deadlock of some sort. I don't think your hardware configuration really matters here. We'll keep looking into it. Joel On Tue, Dec 20, 2011 at 08:22:48AM

Hi there, I have a question regarding PCI passthrough on the Citrix XenServer 5.6 (Xen 3.4.2). I already managed to get some soundcard passed through to a Windows guest. So I think my knowledge about that topic isn''t _that_ low. But I cannot seem to pass through a SATA/PATA controller to a Linux guest. I have some additional CD/DVD burner (PATA) attached to a SATA/PATA controller

Our workstation vendor EOL'd the gfx card we were buying and replaced it with a different model. With the new card, sound is no longer working. Previous system: # lspci |grep -i audio 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller # aplay /usr/share/sounds/alsa/Noise.wav Playing WAVE '/usr/share/sounds/alsa/Noise.wav' : Signed 16 bit Little

CentOS-6.2 We have a dedicated CentOS-5.7 host used for fax reception and transmission that we wish to move to a CentOS-6.2 virtual guest instance. The CentOS-6.2 virtual host has a 4-port serial card installed. lspci -v tshows this this: 03:00.0 Serial controller: Oxford Semiconductor Ltd OX16PCI954 (Quad 16950 UART) function 0 (Uart) (prog-if 06 [16950]) Subsystem: Oxford

Hello, can someone explain these errors Oct 27 15:34:05 vhost01 named[1316]: zone #ZONE#/IN/auth: refresh: retry limit for master IPV6-MASTER#53 exceeded (source IPV6-THIS#0) Oct 27 15:34:05 vhost01 named[1316]: zone #ZONE#/IN/auth: Transfer started. Oct 27 15:34:06 vhost01 named[1316]: zone #ZONE#/IN/auth: refresh: retry limit for master IPV6-MASTER#53 exceeded (source IPV6-THIS#0) Oct 27

Hi, I have HP DL 180 G6 2U Server loaded with CentOS 5.6. Can someone please suggest any good Hardware Raid Controller Card for the mentioned Hardware and OS. The reason being this server comes with Onboard Sata Controller chipset (HP Smart Array B110i Controller). This server has SATA Harddrive - 4 Nos of 500GB each and the OS doesnot detect it. 00:1f.2 SATA controller: Intel Corporation

Prowling around in the system logs this morning I discover the following entries: May 27 09:48:27 vhost01 mcelog: Cannot open logfile /var/log/mcelog: Permission denied May 27 09:48:27 vhost01 mcelog: failed to prefill DIMM database from DMI data May 27 09:48:27 vhost01 mcelog: Cannot bind to client unix socket `/var/run/mcel og-client': Permission denied and later: vhost01 setroubleshoot: