similar to: Maybe OT - Centos 5 SATA JMicron JMB361 SATA

Hi, I have some errors in dmesg: [ 542.255788] ata1.00: exception Emask 0x0 SAct 0xffffff SErr 0x0 action 0x0 [ 542.255797] ata1.00: irq_stat 0x40000008 [ 542.255805] ata1.00: failed command: READ FPDMA QUEUED [ 542.255821] ata1.00: cmd 60/00:00:1a:b7:7a/04:00:1d:00:00/40 tag 0 ncq 524288 in [ 542.255824] res 41/40:00:a0:b7:7a/00:00:1d:00:00/40 Emask 0x409 (media error) <F> [

Hello, A message was already posted here regarding this issue- I experience the same problem with 6 machines, all with Hitachi harddrive, VIA Motherboard which uses the sata_via driver: Once every few days each machine freezes or just stops reading from the HD and throws i/o error messages as pasted below. Note that the first "ata exception Emask" errors apear right after booting,

I just installed CentOS 5 on a computer. On boot, I get the a error message, related to 2 SATA disks. These errors did NOT appear on version 4.4 with the EXACT same hardware. Could someone please tell me what these error are and if there is some known way to prevent them? My configuration: - 2 Hitachi SATA 120 GB Harddisks - Intel P4 3GHz - Tyan Tomcat i875p motherboard - 1 GB ECC RAM - 2

I just installed CentOS 5 on a computer. On boot, I get the a error message, related to 2 SATA disks. These errors did NOT appear on version 4.4 with the EXACT same hardware. Despite the error messages, the disks seem to be working with no problems. Could someone please tell me what these error are and if there is some known way to prevent them? I searched the Net for these errors and they seem

Hello, I was testing Fedora 16 (rc2) Xen host, with included Xen 4.1.1 rpms and Linux 3.1.0 dom0 kernel. Fedora 16 PV domUs seem to work nicely. I noticed a problem with Fedora 16 Xen HVM guests though. The F16 guest kernel (Linux 3.1.0) fails with the qemu-dm emulated DVD-ROM drive.. Full HVM guest kernel dmesg attached to this email. See the end of this email for Xen cfgfile for the

Hi All, I am fairly certain that this disk is failing in my server, and I am replacing it straight away anyway. However, I'd appreciate the views of the list just to be sure as I value your opinion(s). I got these errors, once only so far, in /var/log/messages. This disk has / on it. Oct 5 08:34:47 server1 kernel: ata1.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x0 Oct 5 08:34:47

hi does centos support jmicron? what should i pass to the kernel to make this work? thanks! -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20070529/d1991acc/attachment.html>

OK, it seems that the kernel I have (stock CentOS 4.7: 2.6.9-78.0.22.EL i686) seems to gronk the nVideo SATA controller in AHCI mode. It is NOT able to deal with the SATA DVD Burner I have. It is a "Sony Optiarc DVD Burner with LightScribe Black SATA Model AD-7241S-0B LightScribe Support". Is there some special magic I need to do? Here is the relevant bit from the boot up (SATA ports

I've been having an extremely hard time using the on board SATA controller on my nvidia based board. I have two 160gig Maxtor SATA drives attached to the on board controller, setup as software raid0. The problem is the array is extremely unreliable, where I'm getting constant I/O errors like: sd 0:0:0:0: SCSI error: return code = 0x00040000 end_request: I/O error, dev sda, sector

Hi there, I have a question regarding PCI passthrough on the Citrix XenServer 5.6 (Xen 3.4.2). I already managed to get some soundcard passed through to a Windows guest. So I think my knowledge about that topic isn''t _that_ low. But I cannot seem to pass through a SATA/PATA controller to a Linux guest. I have some additional CD/DVD burner (PATA) attached to a SATA/PATA controller

Hi, As it has been brought to my attention (by several parties), my current MB does not support VT-d. Since I don''t feel like purchasing a brand new system, I have searched for replacement MB-s that would fit into my existing uATX case, support my C2D CPU, and support at least 4x2GB ram. I have narrowed it down to the following four models: SUPERMICRO MBD-C2SBM-Q-O (Q35 chipset)

Hello, I have experienced a dom0 crash where the system became unreachable via the network and the console was unresponsive. I would appreciate help interpretting the logs and any configuration change suggestions. It is a stock Debian Lenny dom0 running xen 3.2.1 with kernel 2.6.26-2-xen-amd64 and an AMD Athlon IIx4 with 4 GB of RAM. It is running 4 VMs. One VM has two PCI NICs being

This has been bugging me for years but never got around to spending a lot of time on it until I now want/need to use it for work stuff. Problem is simple I get access denied when trying to create a file in a directory that is not owned by me or my primary group that doesn't have world writable permissions. Ive also had similar issues with NFS mounts where I can't move/create/delete files

I am installing dahdi on a machine lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge 00:01.0 PCI bridge: Hewlett-Packard Company Unknown device 9602 00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0) 00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) 00:06.0 PCI bridge: Advanced Micro Devices [AMD]

Hi, Recently I reinstalled the OS on my Samba PDC, letting Linux FC3 installer do it's thing then overwriting the smb.conf with my old one. Now I find that although it tries but can't become Domain master browser again, although it is happy to become a local master, a login server and to serve files. The reason given in the log files is that there is another PDC on the submet at

I've tested both 6.3 and 7.0-RC2, amd64 architecture, and have found the occurrence of an interrupt storm using an ASUS A8N-SLI Premium (nForce 4) motherboard with an AMD Opteron 175. Relevant dmesg output: atapci0: <nVidia nForce CK804 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 6.0 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA

To those of you who may be interested, to get SATA drives to work on this motherboard with Xen 3.3.1 (compiled from source) you need to set SATA to RAID mode in the BIOS, not the default IDE mode. So I can only assume that the 2.6.18.8 kernel has a problem with the VIA SATA in IDE mode, and can''t recognise it, even though the host OS (Ubuntu 8.04LTS, in my case) has no problems with it.

Hi all, I would like to get my system to work with IOMMU. (The long-term goal is VGA passthru.) System is as follows: CPU: Core 2 Duo E6600 MB: Foxconn G9657MA-8EKRS2H (w. latest bios: 631F1P61) Virtualization support is enabled in BIOS. (These is only one option.) Hypervisor: xen 4.0.0 from Debian, AMD64 Xen config: iommu=verbose output of xen dmesg is attached. HVM domains work (lasd tried

Hello List, I'm hoping someone else out there has an Asus DSBF-DE server board, and can tell me if anything special needs to be done to get ports 5 and 6 of the onboard SATA to work under Centos 5.1 x64. I have drives on 1 through 4 that are detected and working properly, however, a drive on 5 is not detected, from what i can tell, the kernel doesn't even see phy's for ports 5 and 6.

Hi, I have a SATA PCIe 6Gbps 4 port controller card made by Startech. The kernel (Linux viz1 2.6.32-220.4.1.el6.x86_64) sees it as Marvell Technology Group Ltd. 88SE9123 I use it to provide extra SATA ports to a raid system. The HD's are all "WD2003FYYS" and so run at 3Gbps on the 6Gbps controller. However I am seeing lots of instances of errors like this