similar to: SAS drive not showing [SOLVED]

On 2/16/2016 3:23 PM, Zube wrote: > Does anyone know what program can be used to query the RAID status > from the OS for an on-board LSI SAS 2308-4i? the 2308 isn't actually a megaraid, its a simple SAS HBA that has an optional raid mode IF its flashed with IR firmware... this only supports raid 0/1/10. I always(!) flash these with the IT firmware that turns them back into a

On Tue Feb 16 03:35:06 PM, John R Pierce wrote: Thanks to both you and Mark Roth for chiming in and thank you for the lsi-raidinfo script. > On 2/16/2016 3:23 PM, Zube wrote: > >Does anyone know what program can be used to query the RAID status > >from the OS for an on-board LSI SAS 2308-4i? > > the 2308 isn't actually a megaraid, Right, that is in agreement with both

On 1/30/2015 9:44 AM, John R Pierce wrote: > On 1/29/2015 7:21 PM, Jatin Davey wrote: >> [root at localhost ~]# lspci | grep RAID >> 05:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS-3 >> 3108 [Invader] (rev 02) > > to get info out of those, you need to install MegaCli64 from LSI > Logic, which has the ugliest command lines and output you've

On Thu, Jun 30, 2016 at 5:28 PM, Valeri Galtsev <galtsev at kicp.uchicago.edu> wrote: > > On Thu, June 30, 2016 2:59 pm, m.roth at 5-cent.us wrote: > > I've been googling, and haven't yet found the answer: does anyone here > > know if a MegaRAID SAS 2008 (falcon) (rev 03) can handle drives bigger > > than 2TB? > > > The following sources say, yes

On 1/29/2015 7:21 PM, Jatin Davey wrote: > [root at localhost ~]# lspci | grep RAID > 05:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS-3 > 3108 [Invader] (rev 02) to get info out of those, you need to install MegaCli64 from LSI Logic, which has the ugliest command lines and output you've ever seen. I use the python script below, which I put in

John R Pierce wrote: > On 7/26/2016 2:38 PM, Peter wrote: >> On 27/07/16 09:11,m.roth at 5-cent.us wrote: >>> >This is... odd. Got a 6.8 box, a Dell R320 lspci tells me >>> >01:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS >>> 2008 [Falcon] (rev 03) >>> >so it*should* accept an SAS drive. I've got a Cheetah that's a

On Thu, June 30, 2016 2:59 pm, m.roth at 5-cent.us wrote: > I've been googling, and haven't yet found the answer: does anyone here > know if a MegaRAID SAS 2008 (falcon) (rev 03) can handle drives bigger > than 2TB? > One way to find out is to plug 4TB drive and take a look. Another is to ask one who has the same controller to do the same for you. I am going to play with

I've got a box running C7, just updated (yesterday). It had an onboard RAID controller, and an HBA. I just installed a new, additional RAID card, all LSI. MegaCli64 only sees one controller. I can't seem to find the magic to see the others. I *know* the new card is a MegaRAID - the box it came in says so. The system sees it 1:00.0 RAID bus controller: LSI Logic / Symbios Logic SAS1078

I've started searching, but if anyone here has a link.... I *just* discovered yesterday, to my dismay, that a previous admin built a box that has four hot-swap bays as two as RAID 1... and the other two as RAID 0. Honest, I thought I was pulling the failing drive out of a RAID 1, not that the RAID 0 contained all the websites for a production box.... So, what I want to do is this: it's a

On 7/26/2016 2:38 PM, Peter wrote: > On 27/07/16 09:11,m.roth at 5-cent.us wrote: >> >This is... odd. Got a 6.8 box, a Dell R320 lspci tells me >> >01:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 2008 >> >[Falcon] (rev 03) >> >so it*should* accept an SAS drive. I've got a Cheetah that's a few years >> >old, and having

Scott Silverman wrote: > On Tue, Jul 10, 2018 at 12:37 PM, mark <m.roth at 5-cent.us> wrote: > >> I've got a box running C7, just updated (yesterday). It had an onboard >> RAID controller, and an HBA. I just installed a new, additional RAID >> card, all LSI. >> >> MegaCli64 only sees one controller. I can't seem to find the magic to >> see

Thank you for your help. Le 05/01/2015 19:10, John R Pierce a ?crit : > works here fine on the 9261, which is an OEM version of the same card > with the connectors in a different orientation... you might check your > LSI firmware revision. My firmware seems to be more up to date. Anyway, I will try to update firmware. I have to check how to do that. # dmesg |grep LSI scsi4 : LSI SAS

I've got two drives from a now-dead server, they were RAIDed, a mirror, I'd assume. I need to see if there's anything on them I need to transfer to the replacement, so I just shoved them into another Dell server, with a PERC 5 controller - I think that's what the dead one had. I fired up MegaRAID storage manager... but can't see any way to tell it to recreate that RAID. Anyone

I would try the newer storcli utility instead of megacli. Thanks, Scott Silverman | IT | Simplex | 312-360-2444 230 S. LaSalle St., Suite 4-100, Chicago, IL 60604 On Tue, Jul 10, 2018 at 12:37 PM, mark <m.roth at 5-cent.us> wrote: > I've got a box running C7, just updated (yesterday). It had an onboard > RAID controller, and an HBA. I just installed a new, additional RAID

We have a system - it's C 7 - that a while back lost three drives of a large array. The other admin here replaced the failed drives, but never went through the MegaRAID replace series of commands. I've just brought it back up and put a new filesystem on it, but here's what's odd: if I do smartctl -a -d megaraid,x /dev/sda, where x=drive number, for all the other drives, I get

On 1/5/2015 7:14 AM, Philippe BOURDEU d'AGUERRE wrote: > > Since Centos 6.6 update (kernel 2.6.32-504), the controller doesn't > initialize at boot. Reverting to kernel 2.6.32-431 allows server to > boot fine. works here fine on the 9261, which is an OEM version of the same card with the connectors in a different orientation... you might check your LSI firmware revision.

Does anyone know what program can be used to query the RAID status from the OS for an on-board LSI SAS 2308-4i? On this page: http://docs.avagotech.com/docs/12351997 there is a curious note on the left that reads: "Integrated MegaRAID support available upon request" After one mostly fruitless round of chatting with LSI/Avago/Broadcom and one completely fruitless round of chatting

On 2/2/2015 10:32 AM, John R Pierce wrote: > On 2/1/2015 8:25 PM, Jatin Davey wrote: >> >> On 2/2/2015 9:25 AM, John R Pierce wrote: >>> On 2/1/2015 7:31 PM, Jatin Davey wrote: >>>> >>>> I ran your script and here is the output for it: >>>> >>>> Start of the Output*************************** >>>> [root at localhost

Haven't gotten any tips on a solution to the problem below. It happened again this weekend. My next test steps (order not determined): 1. Downgrade to CentOS 4 2. Swap out PERC controller with a spare I have never had a problem with the PERC4/DC controllers on our other machines (RHEL3/4, CentOS 4). Although, I've no other machine that has 5 300G Fujitsu SCSI drives either. Any

Release notes say no support for the RAID card in a box I just picked up...is there no hope for this box running 2.6 kernel? http://www.redhat.com/docs/manuals/enterprise/RHEL-4-Manual/release- notes/as-x86/ The kernel shipped with Red Hat Enterprise Linux 4 includes the new megaraid_mbox driver from LSI Logic, which replaces the megaraid driver. The megaraid_mbox driver has an improved design,