similar to: centos7+lightdm : no /almost no login screen

Another NUC alternative: https://www.gigabyte.com/uk/Mini-PcBarebone On 2019-07-10 12:14, Mike wrote: > https://www.asrock.com/nettop/index.asp > > Asrock has a series of Intel and/or AMD based mini-pc's called the > DeskMini. > Competes in the Intel NUC space. > Plenty of power and up-to-date components, multiple ports for dual > monitor and at least two ssd's,

Good day, Geoff. On 2024-12-02 03:22, Geoff Winkless wrote: > [...] > > I tried (a truncated version of) your instructions with my kernel and > it boots fine under qemu. Sadly that same kernel will not boot on my > real hardware (an ASRock N100-based board). > Just to confirm, are these 2 points all true?: 1. On the "ASRock N100-based board," your

Hi folks, I am able to install workstation successfully on a dedicated SSD w/ GPT partition w/ UEFI boot using the latest `CentOS-8.2.2004-x86_64-dvd1.iso` from a bootable pen drive. The motherboard is ASRock x570 Gaming 4 ( https://www.asrock.com/mb/AMD/X570%20phantom%20Gaming%204/index.asp) w/ Ryzen 3600, 16G RAM, 1TB SSD in question. However, after login, when I do a DNF update (which is

Hello, I'm facing issues with a Point of View GT210/218 and nouveau drivers. I'm using ubuntu server with LXDE on top of it... *lshw -c video* output: *-display description: VGA compatible controller product: GT218 [GeForce 210] vendor: NVIDIA Corporation physical id: 0 bus info: pci at 0000:01:00.0 version: a2 width: 64 bits clock:

Hi, I have just upgraded my computer to Intel Core i5-4430 Quad Core @ 3.0 GHz (supports VT-d), ASRock B85M Pro4 micro-ATX LGA1150 motherboard (supports VT-d), 8 GB Kingston DDR3-1600 memory and Cooler Master Elite 311 ATX casing (all for SGD$501). I made my computer upgrade on Independence Day 4th July 2013. I have also flashed the UEFI BIOS of ASRock B85M Pro4 motherboard to version 1.50.

Hi Folks, CentOS 5.5 x86_64 Asrock-Board with 2 USB3 plugs. Normally USB3-drive is detected. But occasionaly after "umount" next time this drive or other ones will not be detected. I have to boot the PC - than it works - till next unrecognition. On USB2 plugs all works correct. No messages in /var/log/messages nor dmesg. What happens here? Board failure - or other reasons? Some

I recently purchased a set of ASRock Intel i5 MB/CPU combos for a budget compute cluster. Every time we load up a system and try to boot with a recent EL6/64 ISO, we get a message that reads: > This hardware (or a combination thereof) is not supported by CentOS. For more > information on supported hardware, plesae refer to http://www.centos.org/hardware Not only does the hardware

On 5/28/2023 6:19 AM, asterisk at phreaknet.org wrote: > >> >>> A great reason to avoid Asterisk packages and compile from source >>> instead. You'll save yourself a lot of headaches. >> >> That's how I started, by trying to build version 18 from source. It >> failed. Colossally. The compile of sources would run for a while, >> then the

Hi, i just installed CentOS 7.2 on my little "server" but i get a black screen during boot. It is a Asrock Am1h-itx mainboard with an AMD 5350 CPU (onboard graphic). I created a raid 6 but i dont think thats the problem, as the boot process goes pretty far. I would even say its going until X should start, but it is a server install, so i guess there is no X. Can someone tell me what

Hi, amdgpu + IOMMU + SME is now working for me on 5.7, yay! But, it is broken on torvalds master, boo. On boot, depending on which exact commit I test, it either hangs immediately (with built-in driver, before starting initramfs), displays some errors then hangs, or spams the screen with many amdgpu errors. I bisected the black screen hang to: commit dce8d6964ebdb333383bacf5e7ab8c27df151218

Hi, amdgpu + IOMMU + SME is now working for me on 5.7, yay! But, it is broken on torvalds master, boo. On boot, depending on which exact commit I test, it either hangs immediately (with built-in driver, before starting initramfs), displays some errors then hangs, or spams the screen with many amdgpu errors. I bisected the black screen hang to: commit dce8d6964ebdb333383bacf5e7ab8c27df151218

I tried to move to the latest stable kernel (4.12) so I could take advantage of my newest custom system (Intel Core I7 6-core; 64 GB RAM; MSI nVidia graphics card; 2 - 120 GB SSD; 2 - 4TB WD Black) on a UEFI Asrock mother board. I've had the machine for 3-months but I couldn't get it to work until I found out that the Nouveau driver was causing me all the 'hardware' issues. I

hi i am a complete newbie to xen, and i have still a problem with hda(hdc): lost interrupt coming from the 2.6.10-xen0 kernel on an asrock k7s8x board with an additional promise 100 controller(doesn''t get recognized anyway) an amd athlon 2400+ and 512 mb ram. an ideas? regards toby ------------------------------------------------------- SF email is sponsored by - The IT Product

Hey all I have here two machines... Machine A) AMD Athlon XP 2500+ CPU Nvidia 6800GT GPU 1GB DDR 400 RAM Ubuntu 8.04-32bit OS Machine B) Intel Q6600 CPU ATI/AMD 3650 GPU 2GB DDR2 800 RAM Ubuntu 8.04-64bit OS Machine A plays Civilization IV and Oblivion just fine, played for an hour last night with no issues. Machine B gets to the part where it initializes the engine of the game and after a

I am considering buying a small, and therefore easily portable, computer as an alternative to the laptop I already have. Obviously it would not have battery, a screen, nor a keyboard etc. but more or less be an easily portable computing unit to move between offices where a keyboard and monitor(s) could then be connected. I want to run CentOS 7, later CentOS 8. The smaller, the better, however,

EFI booting may hang indefinitely when no keyboard is present on a machine (or when UEFI has chosen to not init USB due to fast boot). Reproducible at least with "EFI v2.31 by American Megatrends" on an Asrock H81M-ITX board. Reason is the input draining loop near the end in efi/main.c; it calls ReadKeyStroke() as long as EFI_NOT_READY is not returned. On machines without keyboard,

Environment: ASRock Z86 Extreme4 - Intel i5 2500 http://www.asrock.com/mb/overview.asp?Model=Z68%20Extreme4 I have installed the latest UEFI patch(1.70) and all tests were run from a reset of everything to default. I have tested with both Ubuntu 11.10 and Fedora 16 and get the same results on both, including building xen 4.2-unstable. I bought this particular MB because it had a know working vt-d

My system reboots when I trying to start any HVM domU. This problem was described earlier: http://lists.xen.org/archives/html/xen-devel/2013-08/msg01395.html My system is openSUSE 13.1 RC2 with Xen 4.3.0 My hardware is ASRock FM2A75 Pro4 AMD A8-6600K APU Gigabyte Radeon 7850 8 Gb DDR3 1600Mhz I have setup serial console and could provide logs your requested. Attached logs from xl dmesg,

About 9 months ago, I made a policy decision to adopt RAID 1 on all systems I admin. (about 20 systems, all told) It's been a long, slow process. One of the systems is being upgraded from CentOS3 to CentOS4. It's been rock-solid stable for over a year. It's a "frankenserver" with parts from all over the place, maintained over years of active service. Currently,

Hi all, I've removed two legacy features from LightDM: 1. lightdm-set-defaults This tool was created so that scripts could easily modify the LightDM configuration, in particular so packages could modify it on installation / removal. This is not required since LightDM 1.8 as you can now create a snippet of configuration in /etc/lightdm/lightdm.conf.d or /usr/share/lightdm/lightdm.conf.d.