similar to: CentOS-6.7, kvm bridges, virtual interfaces, and routes

I have been looking at this problem on and off for a considerable period. Given my lack of knowledge I have been unable to resolve this quickly and in consequence it has been constantly shoved to the background as other issues arise. Here is the situation: I have two dual-homed kvm hosts both running CentOS-6.7 and identically configured. These are connected to the same LAN segment via

Search for policy routing. Surprisingly, I cannot find anything about it in the RHEL6 docs. You don't say how exactly you tried. It should be sufficient to edit rt_tables (maybe that's a step you missed? The actual number used doesn't matter) and add the route-eth1/rule-eth1 files on every host involved. I.e. no separate route/rule file shold be needed for the default interfaces.

I am trying to establish a connection (using virsh command) to a couple of hypervisor hosts, both on SLES 11.3 environments. The host from where i am making both the connections is a SLES 10.4 instance. *kvmh911351246:~ # virsh -c qemu+ssh://9.113.51.247:22/system <http://9.113.51.247:22/system>libvir: XML-RPC error : authentication requirederror: failed to connect to the hypervisor* The

I am trying to establish a connection (using virsh command) to a couple of hypervisor hosts, both on SLES 11.3 environments. The host from where i am making both the connections is a SLES 10.4 instance. *kvmh911351246:~ # virsh -c qemu+ssh://9.113.51.247:22/system <http://9.113.51.247:22/system>libvir: XML-RPC error : authentication requirederror: failed to connect to the hypervisor* The

Greetings, I recently upgraded my Samba server and am now running Debian sid's samba-2.999+3.0.alpha20-4. I have the following domain / workgroup / browsing options set in /etc/samba/smb.conf: interfaces = eth0 192.168.54.0/24 192.168.52.0/24 os level = 65 local master = yes domain master = yes domain logons = no preferred master = yes enhanced browsing = yes

Hi all Iam trying to implement "route add " using netlink. The changes are not reflected in the routing table. I have given my code and screen shots of the routing tables. Can anybody tell me is there any mistake iam making in defining the fields . or any other mistake iam commiting thanxs viji //////////////////////////////////// CODE

Hi, I'm trying to configure a network bridge over a bonding without any success. Here is my configuration: ifcfg-eth0: DEVICE=eth0 HWADDR=00:1E:C9:E8:3F:E5 ONBOOT=yes USERCTL=no MASTER=bond0 SLAVE=yes ifcfg-eth1: DEVICE=eth1 HWADDR=00:1E:C9:E8:3F:E7 ONBOOT=yes USERCTL=no MASTER=bond0 SLAVE=yes ifcfg-bond0: DEVICE=bond0 ONBOOT=yes BRIDGE=br0 USERCTL=no ifcfg-bridge0: DEVICE=br0

I have a Linux 2.6.16 machine with two gigabit ethernet adapters that I would like to use for testing Ethernet equipment---right now just an Ethernet cable, but later switches, bridges, etc. I tried assigning the two adapters IPs of 192.168.50.1 and 192.168.51.1 and then setup the routing table to direct 192.168.51.0/24 traffic to the first adapter, and 192.168.50.0/24 traffic to the second,

Good Afternoon, I had sent in an earlier message about trying to login and getting dropped from a W2000 workstation. I received a reply back to upgrade Samba from 3.013 to 3.020x. I did this. Operating System: SuSE 9.3 Samba Version: 3.0.20a (SuSE's RPMs) I am using /etc/samba/smbpasswd file and not LDAP to store the users and passwords. [global] passwd chat debug = Yes passwd

Hi, I am try to configure Asterisk as PBX system with two interfaces as shown below. One interface pointing to the local subnet with a SIP phone and another interface pointing to the external ISP SIP Sever. SJPhone(X.X.141.32)<--------->(Y.Y.47.149)local-intf-|Asterisk|external- intf(Z.Z.247.106)<-------->(w.w.158.26)ISP-SIP-Server----OutsideWorld I am able to setup a call from the

Hello, As subject says I am working on browsing and access servers, which are dispatched on two subnet, in one workgroup named "WORKGROUP". First here the network : ( I don' t use ASCI art 'cause I am not an expert on that and it may not be printed as it was emailed. ) So, there is five machine : - one, under debian 6, which is the gateway - two, under

Hi *, having built Xen 4.1.0 and running my Dom0 on Slackware 13.1, I''m trying to assign different physical network interfaces to different DomU guests: vif = [ ''bridge=ethX'' ] in the DomU configuration files. My /etc/xen/scripts/network-bridge script, however, doesn''t create more than one bridge: root@cen:~# /etc/xen/scripts/network-bridge start

hi, we using samba3.0.7 with a ldap(tls). it works fine. no problems with dns (reverse) lookups etc. all 20 xp clients can logon fast into the samba machine and access all shares. the problem since 3 weeks is, that after a while all shares freeze for 10-20 seconds in a user session and the user have to wait to continue. not all user at the time. the user get no response from explorer, the

I sent this out about a week or so ago, but I have heard nothing. I am *thinking* it is a SELINUX problem, but I cannot figure out what. The SELINUX settings for both machines are *exactly* the same (the stock defaults for a standard CentOS 6 install). The *only* difference is that the desktop (sauron) has a few VMs setup (under KVM) and the laptop (gollum) does not. The desktop has an AMD

At Sun, 14 Feb 2016 19:20:48 -0500 Robert Heller <heller at deepsoft.com> wrote: > > At Mon, 15 Feb 2016 09:41:32 +1100 CentOS mailing list <centos at centos.org> wrote: > > > > > On 14/02/16 02:14, Robert Heller wrote: > > > I sent this out about a week or so ago, but I have heard nothing. I am > > > *thinking* it is a SELINUX problem, but I

On Feb 15, 2016, at 10:34 AM, Mike - st257 <silvertip257 at gmail.com> wrote: > > I have not yet found a USB-to-serial adapter detected as /dev/ttyACM1. > Try /dev/ttyUSB0 ? Both naming schemes are correct, depending on the *type* of USB to serial converter. The difference comes down to a low-level USB implementation detail which I?ve never bothered to commit to long-term memory.

At Sat, 13 Feb 2016 10:14:30 -0500 CentOS mailing list <centos at centos.org> wrote: > > I sent this out about a week or so ago, but I have heard nothing. I am > *thinking* it is a SELINUX problem, but I cannot figure out what. The SELINUX > settings for both machines are *exactly* the same (the stock defaults for a > standard CentOS 6 install). The *only* difference is

I have not yet found a USB-to-serial adapter detected as /dev/ttyACM1. Try /dev/ttyUSB0 ? - Mike On Sat, Feb 13, 2016 at 10:14 AM, Robert Heller <heller at deepsoft.com> wrote: > I sent this out about a week or so ago, but I have heard nothing. I am > *thinking* it is a SELINUX problem, but I cannot figure out what. The > SELINUX > settings for both machines are *exactly* the

On Tue, Aug 26, 2014 at 5:28 PM, Damien Miller <djm at mindrot.org> wrote: > On Tue, 26 Aug 2014, Kevin Brott wrote: > > > So results of testing ... > > > > Conditional caveats: > > 1) current snapshot will not build against native openssl on any system > > with openssl version <0.9.8f (i.e RHEL <=6.4) ... requiring alternate > > openssl

On Wed, Sep 02, 2020 at 11:56:58PM +0000, Chen Wenwei wrote: > Found pkg-config: /usr/local/bin/pkg-config (0.29.2) > Did not find CMake 'cmake' > Found CMake: NO > Run-time dependency libapparmor found: NO (tried pkgconfig and cmake) > Library attr found: YES > Library audit found: YES > Run-time dependency bash-completion found: YES 2.1 > Run-time dependency blkid