similar to: KDE Dying Overnight After Centos 7 Upgrade

Hi all, We have a development server we have just tried updating the kernel & glibc after recent recommendations. Its been stable previously for a few years with only scheduled reboots. Its running Centos 6.6(final) 2.6.32-573.18.1.el6.x86_64 GNU libc 2.12 Upgraded via YUM, rebooted, all fine for several hours, and then network seemed to hang. Not much happening as its a dev server we are

> Date: Friday, February 19, 2016 11:08:48 +0000 > From: Ian B <ibrierley at gmail.com> > > On Fri, Feb 19, 2016 at 10:56 AM, Ian B <ibrierley at gmail.com> > wrote: > >> Hi all, >> >> We have a development server we have just tried updating the >> kernel & glibc after recent recommendations. Its been stable >> previously for a few

I have a freshly built, updated EL6 system and am having problems with USB stability - at boot everything works fine but within a few hours, USB devices start disappearing randomly. At first I though the USB devices were suspect, but removing the suspect devices and an accessory PCIE USB card hasn't changed anything. As of now, a single USB device is working. (which is lucky, it hosts the

Hello, I hope that I am posting the correct list with this question. I have been trying to get VGA passthrough working on my system for some time now without success. I do not have the system with me right now, so I will not be able to provide any logs or error messages right now. I will be able to to do so in a couple of hours. I have a VT-d enabled system (Motherboard and CPU) on which I wish

Hello, I hope that I am posting the correct list with this question. I have been trying to get VGA passthrough working on my system for some time now without success. I do not have the system with me right now, so I will not be able to provide any logs or error messages right now. I will be able to to do so in a couple of hours. I have a VT-d enabled system (Motherboard and CPU) on which I wish

I've got an old server, that I'm *trying* to rebuild from C6. Our regular key, with the kickstarts, etc, simply won't boot. Just a blank screen, and it never goes anywhere. So I'm trying to build it from a year-old regular installer. 100% of the time, the graphical screen is screwed. Resolution's so big that I cannot see the right-hand 10% or 15% of the screen. There

Hi All I have just finished a re-install of a box that was previously working fine under 4.7. The problem is that the matrox drm kernel module is failinf to initialise correctly. :from the dmesg: FreeBSD 4.8-STABLE #0: Thu May 8 11:41:26 SAST 2003 root@shagrat.prv.moria.org:/usr/src/sys/compile/SHAGRAT48 Timecounter "i8254" frequency 1193182 Hz CPU: Intel Pentium III

So, after some discussion of our new control workstations, we are iterating in on a solution; we are looking at a 1U short-depth SuperMicro SuperServer 5017R-MF with a graphics card in the PCI-Ex16 expansion slot. However, the display requirements have increased to 3 or more monitors for future expansion, so I was wondering whether anyone had any experience with triple- or quad-display single card

Stephen John Smoogen wrote: > On Thu, 14 Feb 2019 at 15:48, mark <m.roth at 5-cent.us> wrote: >> >> I've got an old server, that I'm *trying* to rebuild from C6. Our >> regular key, with the kickstarts, etc, simply won't boot. Just a blank >> screen, and it never goes anywhere. >> >> So I'm trying to build it from a year-old regular

Hi, I got a Matrox RT.X100 Pro capture card to make a live video streaming with it. The concert to be streamed will be on Saturday... I have a Linux-based server running Icecast 2.3, so I need to make this computer with the Matrox card to work with the Icecast server. I'd prefer Ogg Theora. Unfortunately there's no Linux support for this card, so the only choice I have is Windows XP.

Signed-off-by: Allen Pais <allen.lkml at gmail.com> --- arch/powerpc/platforms/cell/spider-pci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/platforms/cell/spider-pci.c b/arch/powerpc/platforms/cell/spider-pci.c index d1e61e2..82aa3f7 100644 --- a/arch/powerpc/platforms/cell/spider-pci.c +++ b/arch/powerpc/platforms/cell/spider-pci.c @@ -106,7 +106,7

I''ve been attempting to use my machine with a Matrox Parhelia card with the Fedora Core 6 Xen kernel. The Matrox card requires a kernel module. The module builds without error, but fails to load due to an unknown symbol, "cpu_callout_map". I submitted this issue to the Unofficial Matrox Technical Support Forum, but haven''t been able to resolve anything yet:

I've just test an ATI FirePro 2460 graphics card on CentOS 6.4. It connects 4 monitors. It worked with the standard radeon driver. I was able to arrange the monitors into my preferred configuration (as a square array, 1 upper left, 2 lower left, 3 lower right, 4 upper right) simply by clicking System -> Preferences -> Display, and then moving the four monitor images. This creates the

I have an unusual use case. I wonder if anyone can help. We use a PC with 8 HDMI outputs for powering a video wall in an operations centre. We use two Matrox video cards, each with 4 outputs. "lspci" reports these cards as" [AMD/ATI] Cape Verde PRO [FirePro W600]". On an older version of CentOS 7, I used the proprietary AMD/ATI driver. This had a utility (I roorget the name)

My boss wants to put together a Network Operations Center, with a network monitoring server as the centerpiece. He wants that server to have 6 monitors: 4 for network monitoring tools (rrdtool, etc) and two for running commands and the like (ping, traceroute, etc). I know that with the right video card(s) you can have two monitors, but has anybody had 6? Thanks! Ben

Hello All! I have a new OpenSuse 12.2 (with 3.4.33-2.24-xen kernel) + Xen 4.1.3 install on an IBM x3550 server. The system is booted via EFI with Grub2 bootloader and it boots up normally, either with or without Xen. But i have one trouble with it: I can''t get console access working with Xen. The strange thing is, despite the "WARNING: no console will be available to

I need to start running a dual head on one of my machines. Eventual target is CentOS 5.x. Decided to test first on my 4.6 setup (eventually it will achieve 5.x). Both machines are fully up to date. The test machine is 4.6, 2 radeon video cards. Searched the web, CentOS site, even bugzilla. This bugzilla entry from a 4.2 system), http://bugs.centos.org/view.php?id=1875 had only a WFM response.

I have a user who wants to have 4 monitors attached to his CentOS 6.4 system. I know that you can't use both on-board video and a PCI video card at the same time, but what about two PCI video cards? The system seems to recognize them as shown by the lspci -v output below, but I can't get Xorg to use the second card. Has anyone done this? If so, what is the trick to get it to work?

Anyone familiar with pymol? We're getting an error I find references to from a few years ago when we try to run remotely on a headless server. I can run it fine on my machine (CentOS 6.3, NVidia video), and on another person's workstation remotely, with other make video, but the server's got a Matrox - which shouldn't matter, since I'm running this after ssh -Y. pymol yum

I am looking for a video card (preferably nvidia) that will do 1920x1080p (that is p not i). I need 1920x1080p, AGP 8x, DVI ----------------------- history is below: I prefered nvidia as they have a decent method of driver updates. I presently have the FX5200. It actually works at 1920x1080p but the nv driver locks up. I downloaded the nvidia drivers and they will not run at 1920x1080p. I