similar to: CentOS7 and "ip link alias"

This is my system info: Debian Release: 10.5 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 5.4.60-1-pve (SMP w/16 CPU cores) Kernel taint flags: TAINT_PROPRIETARY_MODULE, TAINT_OOT_MODULE Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en (charmap=UTF-8) Shell: /bin/sh

someone recommended that i should give br0 the same hardware address as eno2. I did that, and restarted the vm, and it still does not work. Here is my current host interface config: ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft

Dear CentOS-Community, we are facing the following issue: A secondary ip address seems to be automatically added to a nic which causes several issues in our setup. This server is equipped with four nics which are currently in use: # nmcli con show NAME????? UUID????????????????????????????????? TYPE????? DEVICE eno2????? cb6fcb54-be52-4ab6-8324-88091a0ea1a0? ethernet? eno2 eno4?????

On Nov 2, 2015, at 2:40 PM, Mike - st257 <silvertip257 at gmail.com> wrote: > But when I try to remove it, I'm either trying to do something _actually_ > not supported or I don't have the proper syntax to accomplish what I want. It doesn?t look like ?ip link? has the syntax to remove an alias, but it can be done via sysfs: # ip link show dev lo 1: lo:

This does not look bad, pretty ok. But im do have a question here. > ipaddress: 10.103.1.6 X.X.103.1 This indicated that the primary interface is eno2 > 2: eno2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP > ??? inet 10.103.1.6/24 brd 10.103.1.255 scope global eno2 > 3: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP > ??? inet

On 11/04/2015 05:16 AM, Mike - st257 wrote: > But when I try to remove it, I'm either trying to do something_actually_ > >not supported or I don't have the proper syntax to accomplish what I want. > >~]# ip link delete dev eno1 alias "hit" > >RTNETLINK answers: Operation not supported The man page for "ip-link" does not indicate any means of

I have CentOS 7 host. Two guests on bridge network setup by GUI and virt-manager. 1 CentOS 8 guest 1 Win 10 guest Both cannot access the host. They can other machines on the network. Guests can access the internet just not the host. I used virt-manager GUi to set up everything. Selected the eth0:macvtap and Bridge. I "desire" bridge network. If I select something else I get access to

Thoughts please? Thanks, - Mike On Mon, Nov 2, 2015 at 2:40 PM, Mike - st257 <silvertip257 at gmail.com> wrote: > Hello List, > > After demystifying the cause for my /sbin/ifup-local not being executed by > network scripts for an Ethernet interface (don't let NetworkManager control > it or ifup-local won't be executed)... > > ... I have a question with

Dear list, we use debian stretch with Louis's 4.10.5 packages and bind9_dlz backend. There are two AD DCs with redundant ISC DHCP servers on them. The DHCP servers are updating the DNS along the lines of https://wiki.samba.org/index.php/Configure_DHCP_to_update_DNS_records_with_BIND9 but with nsupdate commands replaced by suitable calls to "samba-tool" (I had problems getting the

Dear I need create second bridge xenbr1 for separate traffic between my virtual machine , I following this step but show message that Link veth0 is missing, how I can create veth0 ? When I run script for create xenbr1 ./network-bridge netdev=eth1 bridge=xenbr1 start Shwo this message Link veth0 is missing. This may be because you have reached the limit of the number of interfaces that the

Hi, I would like to run a network firewall as a VM on a KVM host. There are ~ 25 VLANs delivered to the KVM host on three dedicated links, no LACP or other things. I have the VLANs 100-180 on the host's enp1s0, the VLANs 200-280 on the host's enp2s0 and the VLANs 300-380 on the host's enp3s0. To save myself from configuring all VLANs on the KVM host, I'd like to hand the entire

> >> Who are you logged into the Windows PC as ? > > I log in az A\Administrator. I created an admin user, put in Domain > > Admins group, but the result was the same (ok, it would be strange, if > > it would work with it, instead of Administrator) > Then you need to ensure that 'Domain Admins' has the same privilege as > 'A\Administrator' Ok, I

Laine wrote: > -----Original Message----- > From: sendmail [mailto:justsendmailnothingelse@gmail.com] On Behalf > Of Laine Stump > Sent: Monday, March 16, 2015 4:12 PM > To: libvirt-users@redhat.com > Cc: Lentes, Bernd > Subject: Re: [libvirt-users] still possible to use traditional bridge network > setup ? > > On 03/16/2015 10:08 AM, Lentes, Bernd wrote: > >

Am 26.11.19 um 17:37 schrieb Rowland penny via samba: > How about 'getent group Domain\ Users' ? no result = empty reply The "admin" there is able to access stuff and reset his ACLs already. So ... things work so far. thanks. I will consider the config Louis suggested ... but not now (my reply was rejected by some samba-ml-SMTP-server ... another problem)

On 10/03/2016 04:54 AM, TE Dukes wrote: > I can get the guest to access the internet but have tried every was possible > to be able to access the guest from the LAN or even the host. Nothing I have > tried works. > > The only thing all documentation leaves out is how to set up the guest > networking during the install. "All documentation" doesn't leave out this

Guys, what i noticed. Look at this. Refused- 1/3/0 (Class 254) ( /24 ) Paully used /16 update 1/3/1 (Class 254) CNAME V-RDS02.mydomain.com CNAME ? And, if he uses in his example samba-tool dns add dc3 mydomain.com V-RDS02 A 130.130.0.252 A record was used. Is resolv.conf checked and it is sure in pointing to the correct DNS of the AD first? addresses: -

On Fri, May 8, 2009 at 10:14 AM, Javier Barroso <javibarroso@gmail.com> wrote: > Hello, > > I have a etch xen server with a virtual machine with 2 network > interfaces configured. Every interface has a different mac, and inside > the host has a different ip. > > However I can see with tcpdump and arpwatch (I discover this because > arpwatch told me), about the two ips

Hi, i'm currently installing a SLES 12 64bit system. libvirt-client-1.2.5-13.3.x86_64 and libvirt-daemon-1.2.5-13.3.x86_64. Formerly I created my vm's (KVM) using a traditional bridge in my host systems, mostly SLES 11 SP3. But with SLES 12 I don't succeed. I can use the macvtap device in the host, but I like to be able to communicate between host and guest. Is the traditional bridge

Hi, see the log below root at AsteriskSlave:~# ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: p3p1: <BROADCAST,MULTICAST> mtu

Dear Samba-List, i'm new to the list and new to samba. Right now I'm trying setup a samba ADDC serving around 50 Windows 10 clients and a couple of linux clients. My ADDC Host has two NICs, eth0 should be connected to the wan - network, eth1 should be connect to a 10.* network, serving the windows and linux clients. The ADDC is up and running, serving only the 10.* network. I