similar to: CentOS7 - Serial Console and Flow Control

Hi, On my minimal installation of CentOS 7, here's what I have in /etc/default/grub: GRUB_TIMEOUT=0 GRUB_DISTRIBUTOR="$(sed 's, release .*$,,g' /etc/system-release)" GRUB_DEFAULT=saved GRUB_DISABLE_SUBMENU=true GRUB_TERMINAL_OUTPUT="console" GRUB_CMDLINE_LINUX="rd.lvm.lv=centos_amandine/root \ rd.lvm.lv=centos_amandine/swap \

Suggestion: once it's up, rebuild the initramfs. > > I tried that already, but still the same problem. Aparently dracut does not want to activate the LVs required to boot to the root filesystem, for some reason ... Yannis -- Sent from Gmail Mobile

Steffan A. Cline wrote: > I?ve looked and looked and can?t seem to find anything which would > explain why grub.cfg would have been rewritten with a whole new volume > group name. > > Suggestions? > C6 or C7? In either case, have you looked in /etc/default/grub? mark

Am 14.03.23 um 12:30 schrieb Rob Kampen: > OK, > > found out the problem as to why it doesn't boot any kernel except 36.2 > > the system reports that it cannot find > > vmlinuz-3.10.0-1160.88.1.el7.x86_64 > > or any one of the others, except for vmlinuz-3.10.0-1160.36.2.el7.x86_64 > > hence a manual selection from the grub menu when in front of the machine

Hello, I'm having a strange problem booting a new centos7 installation. Below some background on this. [I have attached the tech details at the bottom of this message] I started a new CentOS7 installation on a VM, so far all good, o/s boots fine. Then I decided to increase VM disk size (initially was 10G) to 13G. Powered off the VM, increased the vhd via the hypervisor, booted from CentOS

I have built a CentOS 8 base image from a kickstart, for use in OpenStack. This image boots fine but the problem I have is that I can't stop udev from renaming the network device from eth0 to ens<something>. I have /etc/sysconfig/network-scripts/ifcfg-eth0 with the correct HWADDR defined in it, and have set net.ifnames=0 and biosdevname=0 in the grub configuration, but nothing I have

On 10/15/2015 03:05 PM, Mike - st257 wrote: > Would anyone be so kind as to share their experience? > What has worked for your BMC/SoL configurations? I have a C7 server with a physical RS-232 console, but the config should be similar. I did not have to generate a systemd service for this; systemd saw the console line and automatically started the getty without me having to generate a

Xen-users, I have what I think is a bug in the serial console interaction of Xen and Ubuntu. Essentially, the serial console appears to work just fine until it is passed off to dom 0 from Xen. Then it stops communicating with dom0, but still communicates with Xen, if I use the control-A escape sequence. Google will not show me anything related to this. I have local RS-232 serial console working

I''m having a problem with the boot sequence hanging indefinitely at "stopping system V runlevel compatibility". Here are the steps I took to get to this point: 1) installed a single boot, server version of ubuntu 11.10 (intended to be dom0) 2) apt-get install xen-hypervisor-4.1-amd64 xen-utils-4.1 xenwatch xen-tools xen-utils-common xenstore-utils 3) updated grub as follows: -

Dear All I am using Centos 7 with Xen 4.6 on a Dell Poweredge T430 When the machine boots, after the 'Scrubbing Free RAM' message, I get a screen filled with little white squares until the login prompt, so I cannot see what is happening as the machine boots. Also there is nothing on the screen when I reboot. My /etc/default/grub is GRUB_DISTRIBUTOR="$(sed 's, release

On Thu, May 12, 2016 at 5:20 PM, Nicolas Kovacs <info at microlinux.fr> wrote: > Hi, > > On my minimal installation of CentOS 7, here's what I have in > /etc/default/grub: > > GRUB_TIMEOUT=0 > GRUB_DISTRIBUTOR="$(sed 's, release .*$,,g' /etc/system-release)" > GRUB_DEFAULT=saved > GRUB_DISABLE_SUBMENU=true >

I have 10 servers in a cluster running Debian Etch with 2.6.26-bpo.2 with a backport of ocfs2-tools-1.4.1-1 I'm using AoE to export the drives from a Debian Lenny server in the cluster. My problem is if I mount the ocfs2 partition on the server that is exporting it via AoE it fences the entire cluster. Looking at the logs exporting the ocfs2 partition doesn't give much information...

Dear all, I am having a struct that contains on the first column file names and on the second column a number which is a "rating" of the file on first column A small subset looks like that small      [,1]                                                                                                                                                                 [1,]

Dear George, Thanks for the input and ideas. Unfortunately bootscrub=false dos not work, not does setting nothing for vga, still get the 'Little white squares'! I am asking the xen-users as you suggest Regards, Francis From: "George Dunlap" <dunlapg at umich.edu> To: "Francis Greaves" <francis at choughs.net>, "centos-virt" <centos-virt

Yes I usually work headless, but I have been setting it up from new, so need to see what is going on. Regards Francis From: "Scot P. Floess" <sfloess at nc.rr.com> To: "Francis Greaves" <francis at choughs.net> Cc: "centos-virt" <centos-virt at centos.org> Sent: Monday, 22 February, 2016 17:02:12 Subject: Re: [CentOS-virt] Garbled screen

Thanks Robert, I was doing that but it was still renaming to ens*. However, I now know why, and have fixed it. For those who are interested, the problem was that when I created the base image from a kickstart I didn't pass net.ifnames=0 to virt-create, and I ended up with an image that had forgotten about eth0 completely. I have now redone the kickstart with net.ifnames=0 and all is well.

Send CentOS mailing list submissions to centos at centos.org -----Original Message----- From: CentOS <centos-bounces at centos.org> On Behalf Of centos-request at centos.org Sent: Tuesday, July 31, 2018 5:30 PM To: centos at centos.org Subject: (EXT) CentOS Digest, Vol 162, Issue 29 Send CentOS mailing list submissions to centos at centos.org To subscribe or unsubscribe via the World

shell# /sbin/devfs rule -s 2 delset shell# /sbin/devfs rule -s 2 add hide shell# /sbin/devfs rule -s 2 add path random unhide shell# /sbin/devfs rule -s 2 add path urandom unhide shell# /sbin/devfs rule -s 2 add path zero unhide shell# /sbin/devfs rule -s 2 add path pty\* unhide shell# /sbin/devfs rule -s 2 add path pty\* unhide shell# /sbin/devfs rule -s 2 add path tty\* unhide shell#

Hi, > Hello, > > I'm having a strange problem booting a new centos7 installation. Below > some > background on this. [I have attached the tech details at the bottom of > this > message] > > I started a new CentOS7 installation on a VM, so far all good, o/s boots > fine. Then I decided to increase VM disk size (initially was 10G) to 13G. > Powered off the VM,

This issue has been around for some months, but other things keep crowding out a fix. uname give me 3.10.0-1160.36.2.el7.x86_64 #1 SMP Wed Jul 21 11:57:15 UTC 2021 yet I have 3.10.0-1160.76.1.el7.x86_64 3.10.0-1160.81.1.el7.x86_64 3.10.0-1160.83.1.el7.x86_64 3.10.0-1160.88.1.el7.x86_64 loaded. The system uses UEFI to boot. sudo ls -l /sys/firmware/efi gives: total 0 -r--r--r--.? 1 root