similar to: OT, hardware: HP smart array drive issue

Hi. Anyone working with these things? I've got a drive in "predictive failure" on in a RAID5. Now here's the thing: there was an issue yesterday when I got in, and I wound up power cycling the RAID; first boot of attached server had issues, and said the controller had a failure, and a drive had failed, and wouldn't continue booting; when I gave it the three-finger salute,

The hpacucli works... but what isn't clear to me, even with googling, is whether I have to do something from the utility, or whether I can just pull the failed drive out of the hot-swap bay and put another in. I *do* see that I have to re-enable the drive, or rescan it, but right now, I'm concerned about just pulling the dead one out. mark

I am trying to help a friend with a 2850 and snmp monitoring of a controller and its arrays. I don't have any dells, do they have a rpm to make easy work of this for the Percs? They have a monitoring solution already. Any hints I could pass on would be appreciated! Thanks, jlc

Hello all I'm gathering the output of the hpacucli program from as much configurations as possible. If you can find some free time for me, can you send me the output of: hpacucli ctrl all show detail hpacucli ctrl slot=1 show config hpacucli ctrl slot=1 array all show hpacucli ctrl slot=1 array A show hpacucli ctrl slot=1 physicaldrive all show hpacucli ctrl slot=1 physicaldrive 2I:1:1

On 10/07/15 10:06, John R Pierce wrote: > On 10/7/2015 8:42 AM, m.roth at 5-cent.us wrote: >> Got an old HP box with a P800 Smart Array controller. The HP RAID >> box >> plugged into it's failing, and we got a new JetStor. Anyone know if we >> can just plug the JetStor in and set it to passthrough, or if we have >> to use the P800's firmware to set up

On a CentOS 6 64bit system, I added a couple prototype SAS SSDs on a HP P411 raid controller (I believe this is a rebranded LSI megaraid with HP firmware) and am trying to format them for best random IO performance with something like postgresql. so, I used the raid command tool to build a raid0 with 2 SAS SSDs # hpacucli ctrl slot=1 logicaldrive 3 show detail Smart Array P410 in Slot 1

I had to install C5 on a dev server for various reasons (legacy system support and so forth). This dev server is a HP DL180 G6, with a SmartArray P410 raid card... I've installed hpacucli via the RPM from HP's site, but its not finding the controller... C5 (64 bit) is using the default CCISS drivers for this card. # hpacucli ctrl all show config Error: No controllers detected.

On 10/07/15 11:13, m.roth at 5-cent.us wrote: > Jack Bailey wrote: > >>> controller that expects to talk to individual SAS or SATA drives. you >>> can manage it with hpssacli from centos. >> I have the P822. It has no JBOD or RAID 0. hpacucli works with CentOS >> 7.0, but is broken on 7.1 -- it cannot find the controller. > Can it do RAID 6? > This page

Greetings: HP has drivers for the this controler but how do you get the drivers working for the install on Centos 4.0 ? Integrated Dual Channel Ultra ATA 100 IDE Adapter (ATA Models) I extracted the files from this RPM and placed on a CD. hpacucli-7.21-17.linux.rpm boot with the driver disk option and it does not find drivers. I'm I on the right track? Thanks -Jay

At my university we use HP hardware exclusively. When we build CentOS our Unix SA is running several HP utilities. I am wondering what some of these utilities are, such as cmaidad. Is it possible to to use these HP utilities to monitor for disk crashes (similar to smartd)? Is anyone using native HP utilities for this purpose? TIA

Not so much...and hpacucli is actively user hostile. I finally connected and woke up the box (and who, in their right minds, puts the power on button on a rackmount RAID box in the *back* of the box?), and I'm trying to create one large RAID 6. But... ctrl slot=3 show config is incredibly bizarre. It shows me my physical drives... but starts at 9, and for everything up to 18, shows two of the

Hi. I installed solaris express developer edition (b79) on a supermicro quad-core harpertown E5405 with 8 GB ram and two internal sata-drives. I installed solaris onto one of the internal drives. I added an areca arc-1680 sas-controller and configured it in jbod-mode. I attached an external sas-cabinet with 16 sas-drives 1 TB (931 binary GB). I created a raidz2-pool with ten disks and one spare.

Hello All, Very sorry about WAY off-topic query, but you folks really are one of my most International subscribed groups. I am looking for a recommendation for a domain name registrar I can register my .co.za domain name with that won't 'yank my chains'. I tried a couple attempts at registering and found some hidden fees along with the insistence that I had to host my DNS with

we have CENTOS 4.X on DELL server and one one of virtual disk include 4 disk configure as REID5 (one more disk for hot spare). I saw /var/log/messages file have: Aug 4 06:27:02 host1 Server Administrator: Storage Service EventID: 2094 Predictive Failure reported: Physical Disk 1:5 Controller 0, Connector 1 Aug 4 06:27:02 host1 Server Administrator: Storage Service EventID: 2051 Physical

Hello All, I'm trying to use vi commands instead of using the mouse. I open Gnome-Terminal I open a file : vi /home/jvermeulen/.ssh/id_dsa.pub I select the key with " V " ( visual line ) I type " y " to yank the selected line. I can now use :e otherfile.txt and paste the text in otherfile.txt This is the only way I succeed in copying text to another file in

On Thu, 26 Feb 2015 13:42:57 -0600, Ashley M. Kirchner <ashley at pcraft.com> wrote: > And after picking this back up this morning .... still no dice. I have > now > blacklisted the one module that would enumerate the add-in ethernet port > so > that is no longer an issue during the kickstart process, however the > following is now happening: > > - kickstart

On Wed, 25 Feb 2015 17:11:02 -0600, Ashley M. Kirchner <ashley at pcraft.com> wrote: > Add "rdblacklist=MODULE_NAME" to your append line in pxelinux.conf file. >> > > Trying that next. It'll have to wait till tomorrow as we're under a > serious > blizzard/snow event right now and I'd like to get home before all of hell > freezes over.

Hey all - The trunk currently supports three types of mocking/stubbing: Mock Objects (created dynamically at runtime) Partial Mocking of methods on existing classes Stubbing of methods on existing objects or classes The main difference between Partial Mocking and Stubbing is that Stubs don''t verify. I''m wondering if we really need the stubbing facility at all, given that we

On Mar 12, 2015, at 11:52 AM, Jason Warr <jason at warr.net> wrote: > > On Thu, 12 Mar 2015 12:43:27 -0500, Robert Moskowitz <rgm at htt-consult.com> wrote: > >> I found: >> >> http://www.cyberciti.biz/tips/configuring-static-routes-in-debian-or-red-hat-linux-systems.html >> >> where it says to add to ifcfg-eth0: >> >>

Hi, I have an MGE Ellipse 1000 connected to a FreeBSD 7.1 system and it works well except that if I yank the cable it doesn't detect a problem.. It seems to quite merrily read the old data (upsc reports the same values). There is nothing logged by NUT to indicate comms is lost (usbhid-ups is still running). In the attached log I yanked the able at the 28 second mark and plugged it back