similar to: Route traffic through private IP for only certain hosts

I should have what i want to achive. The server is intended as a host for VMs. Our network has multiple VLANs, and the VMs will be connected to different VLANS. The interface eno1 is for host traffic and eno2 is connected to the trunk port of the switch, making the different VLANS availabel to the VMs via the br0. I want to use a VLAN-aware br0, so that I specify in my VM config (on the host

someone recommended that i should give br0 the same hardware address as eno2. I did that, and restarted the vm, and it still does not work. Here is my current host interface config: ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft

I think this is a bug: CentOS 5.4 using Samba 3.4.7. If the server IP address changes, nmbd complains every few minutes that "There is already a domain master browser" on the old IP address. Although "Chapter 41. Managing TDB Files" states: wins.dat N WINS database iused only when wins support = yes has been set. This gets rebuilt or updated at every restart. that does

This is my system info: Debian Release: 10.5 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 5.4.60-1-pve (SMP w/16 CPU cores) Kernel taint flags: TAINT_PROPRIETARY_MODULE, TAINT_OOT_MODULE Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en (charmap=UTF-8) Shell: /bin/sh

Hello All, I'm trying to figure out why xen-utils-common 3.2 doesn't suport bridging on multiple interfaces. I've been digging around /etc/xen/scripts/network-bridges. And modified it so that during boot, when executed the script writes into /tmp/netbr file, but I commented out code that actually creates bridges. I discovered that this script is called three times during boot, I

> Dear CentOS-Community, > > we are facing the following issue: > > A secondary ip address seems to be automatically added to a nic which > causes several issues in our setup. Hi, Can you show as the config of eno4? And can you diff the config of eno1 and eno4. Looks like there is a difference somewhere. Regards, Simon > > > This server is equipped with four nics

On 12/16/18 4:59 PM, Marc Haber wrote: > Hi, > > I would like to run a network firewall as a VM on a KVM host. There are > ~ 25 VLANs delivered to the KVM host on three dedicated links, no LACP > or other things. I have the VLANs 100-180 on the host's enp1s0, the VLANs > 200-280 on the host's enp2s0 and the VLANs 300-380 on the host's enp3s0. > > To save

Dear CentOS-Community, we are facing the following issue: A secondary ip address seems to be automatically added to a nic which causes several issues in our setup. This server is equipped with four nics which are currently in use: # nmcli con show NAME????? UUID????????????????????????????????? TYPE????? DEVICE eno2????? cb6fcb54-be52-4ab6-8324-88091a0ea1a0? ethernet? eno2 eno4?????

https://bugzilla.netfilter.org/show_bug.cgi?id=1117 Bug ID: 1117 Summary: Table ipv4-nat prerouting dnat doesn't accept dest IP:PORT Product: nftables Version: unspecified Hardware: x86_64 OS: All Status: NEW Severity: enhancement Priority: P5 Component: nft

Hi Parke, Thanks, no I had not run those commands, but after doing so, my VPN address is not visible. See below: nsasia at db2:/etc/tinc$ sudo systemctl enable tinc at VPN1 Created symlink /etc/systemd/system/tinc.service.wants/tinc at VPN1.service → /lib/ systemd/system/tinc at .service. nsasia at db2:/etc/tinc$ systemctl start tinc at VPN1 ==== AUTHENTICATING FOR

Hi, We have a Dell server with 4 Ethernet interface. I would to aggregate them in a bond. Everything work but the default gateway doesn?t work on the ? bond0 ? interface and I have no links. My configuration: - CentOS 7: :/etc/sysconfig/network-scripts# uname -a Linux nas-mtd2 3.10.0-957.5.1.el7.x86_64 #1 SMP Fri Feb 1 14:54:57 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux - NetworkManager disabled:

Okay, so I''m trying to setup my multiple ISP setup that I described earlier. I have: # ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: em1: <BROADCAST,MULTICAST,UP,LOWER_UP>

Bernd wrote: > > Laine wrote: > > > -----Original Message----- > > From: sendmail [mailto:justsendmailnothingelse@gmail.com] On > Behalf Of > > Laine Stump > > Sent: Monday, March 16, 2015 4:12 PM > > To: libvirt-users@redhat.com > > Cc: Lentes, Bernd > > Subject: Re: [libvirt-users] still possible to use traditional bridge > > network

Hi all, I have done some tests for the new attributes "check" and "type", could you please help to have a check? And I have some questions about the patch, please help to have a look, Thank you! The questions: 1. in step 4 below, the error message should be updated: Actual results: XML error: invalid mac address **check** value: 'next'. Valid values are

I''ve just installed Xen on a new CentOS 5.1 system, and I can''t seem to make xenbr0 connect to the network. This system has a single physical network card. Apart from creating a few DomU guests, I have not changed any of the configuration. After running network-bridge, xenbr0 and friends are created, but the address and routing info is not moved. James # ip addr

Hello all I have weird problem i can't understand and don't know where to look. [root at chamber ~]# ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host

Hi, I would like to run a network firewall as a VM on a KVM host. There are ~ 25 VLANs delivered to the KVM host on three dedicated links, no LACP or other things. I have the VLANs 100-180 on the host's enp1s0, the VLANs 200-280 on the host's enp2s0 and the VLANs 300-380 on the host's enp3s0. To save myself from configuring all VLANs on the KVM host, I'd like to hand the entire

On Fri, May 8, 2009 at 10:14 AM, Javier Barroso <javibarroso@gmail.com> wrote: > Hello, > > I have a etch xen server with a virtual machine with 2 network > interfaces configured. Every interface has a different mac, and inside > the host has a different ip. > > However I can see with tcpdump and arpwatch (I discover this because > arpwatch told me), about the two ips

Laine wrote: > -----Original Message----- > From: sendmail [mailto:justsendmailnothingelse@gmail.com] On Behalf > Of Laine Stump > Sent: Tuesday, March 17, 2015 3:57 PM > To: libvirt-users@redhat.com > Cc: Lentes, Bernd > Subject: Re: [libvirt-users] still possible to use traditional bridge network > setup ? > > On 03/16/2015 01:07 PM, Lentes, Bernd wrote: > >

Hello, I am trying to boot a VM in libvirt that has 2 interfaces. The first interface is connected to the default network and the second connects to a bridge interface on the host. When the VM boots the first interface doesn't receive an IP address from DHCP. It works when the VM only has one interface though. If I login to the VM using virsh console I noticed that in NetworkManager the