similar to: unable to recover software raid1 install

On Tue, 2015-03-17 at 23:28 +0100, johan.vermeulen7 at telenet.be wrote: > > on a Centos5 system installed with software raid I'm getting: > > raid1: raid set md127 active with 2 out of 2 mirrors > > md:.... autorun DONE > > md: Autodetecting RAID arrays > > md: autorun..... > > md : autorun DONE > > trying to resume form /dev/md1 Hi

Guys, The other day while working on my old workstation it get frozen and after reboot I lost almost all data unexpectedly. I have a RAID1 configuration with LVM. 2 IDE HDDs. md0 .. store /boot (100MB) -------------------------- /dev/hda2 /dev/hdd1 md1 .. store / (26GB) /dev/hda3 /dev/hdd2 The only info that still rest in was that, that I restore after the fresh install. It seems that the

Guys, The other day while working on my old workstation it got frozen and after reboot I lost almost all data unexpectedly. I have a RAID1 configuration with LVM. 2 IDE HDDs. md0 .. store /boot (100MB) -------------------------- /dev/hda2 /dev/hdd1 md1 .. store / (26GB) -------------------------- /dev/hda3 /dev/hdd2 The only info that still rest in was that, that I restore after the fresh

hi all! back in Aug several of you assisted me in solving a problem where one of my drives had dropped out of (or been kicked out of) the raid1 array. something vaguely similar appears to have happened just a few mins ago, upon rebooting after a small update. I received four emails like this, one for /dev/md0, one for /dev/md1, one for /dev/md125 and one for /dev/md126: Subject: DegradedArray

Hi all, One of our Dell servers has failed badly, and one of the domU's has been corrupted in the process. It boots up to a point and then gives me a kernel panic: Loading dm-zero.ko module Loading dm-snapshot.ko module Scanning and configuring dmraid supported devices Scanning logical volumes Reading all physical volumes. This may take a while... No volume groups found Activating

I just replaced two md-raided (RAID1) disks with bigger ones and decided to check out how far I get with them when I put them in another machine. The kernel boots and then panics when it wants to mount the root filesystem on the disk. md: Autodetecting RAID arrays md: autorun md: autorun DONE < not sure if this means it was successful or failed, I rather think it failed because it

Hi all, After rebooting my CentOS 5.5 server, i have the following message: ================================== Red Hat nash version 5.1.19.6 starting EXT3-fs: unable to read superblock mount: error mounting /dev/root on /sysroot as ext3: invalid argument setuproot: moving /root failed: No such file or directory setuproot: error mounting /proc: No such file or directory setuproot: error mounting

Hi, I did a command-line upgrade of a RHL73 server to Centos 5. It was a bit rocky road, but in the end it was successful. There's one thing that bugged me. I'm using software RAID1 consisting of /dev/hd{a,c}. No LVM or anything fancy, a number of /dev/mdX partitions, including the root (+/boot). I'd have preferred to continue using lilo as it works more easily with RAID1

Somewhere, mdadm is cacheing information. Here is my /etc/mdadm.conf file: more /etc/mdadm.conf # mdadm.conf written out by anaconda DEVICE partitions MAILADDR root ARRAY /dev/md0 level=raid1 num-devices=4 metadata=0.90 UUID=55ff58b2:0abb5bad:42911890:5950dfce ARRAY /dev/md1 level=raid1 num-devices=2 metadata=0.90 UUID=315eaf5c:776c85bd:5fa8189c:68a99382 ARRAY /dev/md2 level=raid1 num-devices=2

Hi, I have 2 identical xSeries 346 with 2 identical IBM 72GB scsi drive. What i did is install the centos 4.2 serverCD on the first IBM and set the HDD to raid1 and raid0 for swap. Now what i did is get the 2nd HDD in the 1st Server swap it with the 1st HDD in the 2nd Server and rebuild the Raids. The 1st server rebuild the array fine. My problem is the Second server, after rebuilding it and

Hi, I just replaced Slackware64 14.1 running on my office's HP Proliant Microserver with a fresh installation of CentOS 7. The server has 4 x 250 GB disks. Every disk is configured like this : * 200 MB /dev/sdX1 for /boot * 4 GB /dev/sdX2 for swap * 248 GB /dev/sdX3 for / There are supposed to be no spare devices. /boot and swap are all supposed to be assembled in RAID level 1 across

Hi , currently i have 2 raid devices /dev/md0 and /dev/md1 , i have added 2 new disks, fdisked , created 2 primary partitions with type fd (linux raid autodetect) Now i want to create raid from them root at vmhost1 ~]# mdadm --create --verbose /dev/md2 --level=1 /dev/sdc1 /dev/sdd1 mdadm: error opening /dev/md2: No such file or directory will return that error, what shouldi do? Thanks!

Hello, I would really appreciate some help/guidance with this problem. First of all sorry for the long message. I would file a bug, but do not know if it is my fault, dm-cache, qemu or (probably) a combination of both. And i can imagine some of you have this setup up and running without problems (or maybe you think it works, just like i did, but it does not): PROBLEM LVM cache writeback

We've recently discovered that libguestfs can't handle guests which use md. There are (at least) 2 reasons for this: Firstly, the appliance doesn't include mdadm. Without this, md devices aren't detected during the boot process. Simply adding mdadm to the appliance package list fixes this. Secondly, md devices referenced in fstab as, e.g. /dev/md0, aren't handled

Hi list, I'm new with UEFI and GPT. For several years I've used MBR partition table. I've installed my system on software raid1 (mdadm) using md0(sda1,sdb1) for swap, md1(sda2, sdb2) for /, md2 (sda3,sdb3) for /home. From several how-to concerning raid1 installation, I must put each partition on a different md devices. I've asked times ago if it's more correct create the

Greetings, One of our Servers has a problem. My server running Centos Blue Quartz has a bit of a problem booting. P4 3.0g processor with twin 250g hd and 1g of RAM. The boot screen is locked at: md: ...autorun DONE. Creating root device VFS: Can't find ext3 filesystem on dev md1 mount: error 22 mounting ext3 mount: error 2 mounting none Switching to new root switchroot: mount failed: 22

Hi all. I have a Dell SC440 running Centos 4.4. It has two 500GB disks in a RAID1 array using linux software raid (md1 is / and md0 is /boot). Recently the root file system was remounted read-only for some reason. The logs don't show anything unusual, presumably the file system was read-only before anythng was logged. Running dmesg showed this error repeated many times: EXT3-fs error (device

System is CentOS 6 all up to date, previously had two drives in MD RAID configuration. md0: sda1/sdb1, 20 GB, OS / Partition md1: sda2/sdb2, 1 TB, data mounted as /home Installed kmod ZFS via yum, reboot, zpool works fine. Backed up the /home data 2x, then stopped the sd[ab]2 partition with: mdadm --stop /dev/md1; mdadm --zero-superblock /dev/sd[ab]1; Removed /home in /etc/fstab. Used

I am trying to convert an existing IDE one-disk system to RAID1 using the general strategy found here: http://lists.centos.org/pipermail/centos/2005-March/003813.html But I am stuck on one thing - when I went to create the second md device with mdadm, # mdadm --create /dev/md1 --level=1 --raid-devices=2 /dev/hdb2 missing mdadm: error opening /dev/md1: No such file or directory And indeed,

Hi. CENTOS 7.6.1810, fresh install - use this as a base to create/upgrade new/old machines. I was trying to setup two disks as a RAID1 array, using these lines mdadm --create --verbose /dev/md0 --level=0 --raid-devices=2 /dev/sdb1 /dev/sdc1 mdadm --create --verbose /dev/md1 --level=0 --raid-devices=2 /dev/sdb2 /dev/sdc2 mdadm --create --verbose /dev/md2 --level=0 --raid-devices=2