similar to: apcupsd on c7 and logging

I need a little help on this problem, please? I include my /etc/apcupsd/apcupsd.conf file is attached. port 3551 udp/tcp has been added to the (running) firewall. My APC is recognized as: APC Back-UPS 450 FW:844.Kld.D USB FW:Kld This from the hardware browser. PS says: root 2419 0.0 0.0 4196 584 ? Ss Mar23 0:09 /sbin/apcupsd -f /etc/apcupsd/apcupsd.conf Is group 2419 the

Two quick and simple questions; I want to install the "WinPower" software for my new UPS. On their web site, they have a tar.gz file available for download. I know the reasons for staying with RPM, if at all possible. I''ve Googled and Yahood for ""WinPower"+RPM+Linux and get hits, but no obvious RPM. I tried "yum install winpower" and the response was

Ok, so another apc UPS 3000 complained about bad batteries, and I changed them out from the same order that I'd gotten in a couple of months ago. The APC SmartUPS 3000 started connecting and disconnecting the USB connection. I brought down and up the service, no joy. Finally, after googling, I found a *completely* undocumented way to start apcupsd, that a few years ago someone was told to

We have about 4 servers connected to an APC UPS. The UPS only has one UPS connection. So my question is, in a power outage how do i get all my servers to safely shutdown? Do i run a USB hub? Do i write a script on the one machine connected to turn off all the other machines? I'm confused. Jamie

Hello;I just came across NUT, testing FreeNAS/FreeBSD. I?m running at home a APC UPS connected to another computer, running apcupsd. I found out that NUT didn't talk by default to apcupsd, and there was a driver created relatively recently (apcupsd-ups), which filled in that gap. The version I found on my FreeBSD/FreeNAS system seems to imply that there is more to come to that driver (0.04)

Does anyone here have any "feel" for the "Battery disconnected" and "Battery reattached" log entries? The rebooting came as a result of me turning off modems, router, external drives, monitor, cordless phone and finally, the computer, trying to locate a quiet but annoying "chirp". The "chirps" stopped when I tilted the UPS to look at the front

> Am 17.11.2017 um 17:36 schrieb m.roth at 5-cent.us: > > wwp wrote: >> On Fri, 17 Nov 2017 10:34:53 -0500 Digimer <lists at alteeve.ca> wrote: >> >>> On 2017-11-17 10:16 AM, m.roth at 5-cent.us wrote: >>>> I can't seem to find apcupsd for C 6. Just went to epel's website, and >>> not >>>> visible. Anyone have a clue?

Hello, On Fri, 17 Nov 2017 10:34:53 -0500 Digimer <lists at alteeve.ca> wrote: > On 2017-11-17 10:16 AM, m.roth at 5-cent.us wrote: > > I can't seem to find apcupsd for C 6. Just went to epel's website, and not > > visible. Anyone have a clue? > > > > mark > > I can't speak to epel, but we have copies of it if that helps you; >

Hi, We use Nexenta which has recently implemented a UPS plugin using NUT code. The one problem is that it can't look at APCUPSD servers for APC information. We have a UPS per a rack and a APCUPSD server per a UPS. Without this functionality, we would have to be directly connected to the UPS's for our SAN and we can't do that. Do you have a workaround or something we can do

I need to implement a solution and not having ever used anything but MS Project I would be grateful for a reco on something good. The only hope would be that its web based but I am open to anything! Thanks! jlc

Anyone else around using apcupsd? I seem to be seeing a problem, and I'd like someone to check me on it: I edit /etc/apcupsd/apccontrol to replace the value of SHUTDOWN from /sbin/shutdown to /bin/false (we don't want 3 or 6 servers shutting down over a 2 second or so blip, which it really wants to do). What's happened is that a machine shut down the other day, and looking at it, I

Hello, Looking for a apcupsd 3.14.14 rpm. Been getting communication lost errors. I read there was a problem with the 3.14.12 version regarding a usb connection which I'm using, but has been corrected in 3.14.14. I found a Fedora 25 Rawhide src version, but the link must be bad. Was hoping I could rebuild it for Cento 6. Looks like apcupsd no longer producing the rpms. I could build one

I need to increase reliability at an office as SIP/Internet provider outages are causing some issues. What would be the least expensive analogue card that people are using reliably? Thanks! jlc

John R Pierce wrote: > On 11/17/2017 7:16 AM, m.roth at 5-cent.us wrote: >> I can't seem to find apcupsd for C 6. Just went to epel's website, and >> not >> visible. Anyone have a clue? >> > > suggestion, use NUT instead, the Network UPS Tools....? works for all > sorts of UPS's, not just APC, and supports a master/slave sort of > network control

Here's an odd one: I installed apcupsd, and it works with most of our UPSs. I'd swear it worked on this one. Then I replaced the Gin-u-wine APC batteries, which were dead, with new ones, non-APC. They're just dumb batteries, no chips or whatever on them. If I hook it up using a serial cable, I can get info. If I hook it up the way I had it, with APC's weird USB cable - and this is

Trying to rsync a rather large file from a windows server to a centos server and all but this is working fine. As it's a 20 gig file I am trying to send the diff of with a -c, I suspect over the low bandwidth this presents an issue. I also stage this file locally on another centos server and could calc the diff and create a patch and send that, comparing checksums etc... A quick look at

Has anyone tried running apcupsd on CentOS with a usb UPS? Just curious since I'm putting together a system like this and I noticed in the apcupsd docs it say: "Linux 2.4 series kernels older than 2.4.22 do not bind the USB device to the proper driver. This is evidenced by /proc/bus/usb/devices listing the UPS correctly but it will have "driver=(none)" instead of

I have been searching the net for directions on rhel and centos 5(1) to log in to a windows domain and have found many examples, all different and none work for me. Is there a hint to some documentation anyone here knows of that actually works? Thanks! jlc -------------- next part -------------- An HTML attachment was scrubbed... URL:

What is the closest open source mail server I can replace exchange with that provides the nearest equivalent in user experience? Thanks! jlc -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20080406/5a469804/attachment-0001.html>

How does one access the properties associated with the blanking CentOS does at init3? How would I disable this for example? Thanks! jlc