similar to: "Machine Check Exception: 4 Bank 0: 9000000020000003" when boot CentOS 7, with Intel CPU E3845, and BIOS option "EIST" enable.

I have a nice new 965 chipset mobo with core 2 duo cpu. I was wondering if anyone has any experiences with this chipset and CPU with 4.4 ? Does the jmicron sata/pata interface work ? Are both cores recongnized with the right kernel ? Does EIST work ? Or should I wait for Centos 5 ? Cheers, Brian.

What could be the reason for /sys/devices/system/cpu/cpu0/cpufreq non-existing? The cpu supports EIST. My guess is this may not be available because of cpu power/performance settings in the BIOS, but I can't take down production machines to play with this. Any ideas? The HW is Dell PER 5xx/7xx series. # cpupower frequency-info analyzing CPU 0: no or unknown cpufreq driver is active on

Hi, I'm struggling with a peculiar issue with my UPS. After a power outage, the devices powered by it properly shut down via nut. Eventually, the UPS also goes down. Power is still out, however, roughly 40 seconds after the UPS shut down, it turns back on and it starts supplying power to the load, thus turning back on the devices attached to it. This is obviously not something I want. In

Package: xen-hypervisor-3.0.3-1-amd64 Version: 3.0.3-0-2 Severity: important about every 1 in 10 boots I am getting the following error: (XEN) ************************************ (XEN) CPU0 FATAL TRAP 6 (invalid opcode), ERROR_CODE 0000, IN INTERRUPT CONTEXT. (XEN) System shutting down -- need manual reset. (XEN) ************************************ This seems to happen in the CPU detection

hello, I''m working on a image bank for a nature photographer well known here in Brazil, and I''m looking for a rails developer to outsource the programming to. I''m looking for somebody with a good grip on using rails with a lot of image uploading and processing, thumbnailing etc, as well as tagging and searching in general. Work would be entirely by telecommute. Unless

Hello, I am working on a project where we need to look up bank name (only US banks) from routing number. I will like to use something that is dynamic and has up-to-date information. Does anyone has suggestions on how to accomplish this? Thanks a lot in advance!!!! -- Posted via http://www.ruby-forum.com/. -- You received this message because you are subscribed to the Google Groups

Can someone recommend a good quality 24 or greater port channel bank? Steve -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070506/e5896021/attachment.htm

Hello. I am totally new to this PBX/asterisk/telephony world. I understand that what I need between the T100P/E100P and the POTS analog lines is a channel bank/multiplexer? I am looking for recommendations on this type of hardware. I have been looking around and found a product from valiant communications (http://www.valiantcom.com/) and/or

Hi folks; Sorry for the off-topic message. I'll be brief. If anyone has any experience with older Spectrum Technologies Channel Banks (Centra 3000 or Centra 4000), please contact me off-list. Yes, I plan to use this with Asterisk, but I have no manuals... -- Ron Gage - Saginaw, Michigan I am looking for work - resume at http://www.rongage.org/resume.doc Electrical Engineering, Linux

I have two loop-start phone lines connected to an Adtran TA 750 channel bank. When a call comes into asterisk thru the first phone line and the call is redirect (in transit) back thru the second phone line, the channel bank will leave one or both lines opened (ie hangup with spawn a connection again). does any body have a suggestion: 1) I checked the cables into the channel bank from both phone

Hello all, I have premisys 24 port fxs channel bank that is connected to a Wildcard T100 card. I also have a pri coming in from verizon that is going to another T100 card in my box. I've downloaded the latest CVS, I went into the file /etc/zaptel.conf and added the following lines: span=1,1,0,esf,b8zs span=2,0,0,esf,b8zs bchan=1-23 dchan=24 fxoks=25-48

Need to buy 2-3 channel banks for some asterisk deployments...

I would like to set up an Asterisk PBX for my office in Colombia. Currently we have 13 lines and I want to acquiere a channel bank with enough FXO ports to handle the lines, working with a T100P or a T410P card. I have spotted some candidates at EBay... Problem is that Pay Pal cannot handle payments from my country, Colombia. Has anybody in the list any equipment that fits this application

Gentlemen We are attempting to use * in a simple switching application: +-----> office lines | V LEC <--PRI--> * <--PRI--> modem bank (56k dialup modems) The problem is that (even with no office lines active) the modems have difficulty establishing a connection, the connection is slow (way too slow for 56k modems) and the connections are

Hi list... I have to questions. The first i have to mount a medium PBX so i'm looking arround some channel banks at ebay.. So i have some questiones: ? Is ebay a good place for serch? I found one "T1 to 8 FXO and 16 FXS Channel Bank/Multiplexer from Carrier Access" (

Hi all, We are about to make our first channel bank install. This will be a one PRI outside connection and up to 70 extensions. As the schedule (and the budget) is pretty tight, I would like to learn a little bit more about general experiences with channel banks, like echo cancellation problems, Caller ID usage, etc. TIA, Paulohm

Hi I just came accross this Newbridge Mainstreet 3624 but the Alctel site appears to have zip for reference/user manuals Anyone by chance have 1 of these or a url for the docs ? thx

hi all ! My setup of asterisk is, INTERNAL PABX -------(bundle of Analog lines-FXS +FXO)------>Channel Bank-----------E1-------->X100P(* Box) I'm using pleidaes Channell bank currently which does the FXO+FXS to E1 conversion for me. The trouble is I'm having some call disconnection problem with this CB. And I also saw that people had techinical problem with this channel bank

I am a little confused about the FXO ports on the Carrier Accesss Bank 1. The wiki, and people on the mailing list have stated that they do not have impedance matching, but Carrier Access states in their documentation that they do have impednace matching. Did Carrier Access make a typo, or does it depend on the version of the FXO card? I current have a CAC AB1, and I am having echo problems

Has anyone tried a Vina T-1 Integrator as a channel bank with Asterisk? They appear to be plentiful, but I want to make sure I'm not buying a brick. THX/BDH