similar to: test, and H/W

Is there a way on Dell R320 (two power supplies and hardware RAID-1) on centos to get a message that a power supply is failing or that one of the hardware RAID disks is failing? Sure there is the front panel - but no-one is there ... Is that reported to linux/centos some way? This is my first R320. Thanks, Jerry

We have DELL R910 with H800 adapter in it. several MD1220 connect to H800. Since MD1220 have 24 hard disks in it. When I configured RAID10, there is a choice call 'single spanned virtual disk" (22 disks). Can anyone tell me how "single spanned virtual disk" work? Any document relate to it? Thanks.

Hi, I have Dell md1200 connected to two heads ( Dell R710 ). The heads have Perc H800 card and drives are configured in Raid0 ( Virtual Disk) in the RAID controller. One of the drives had crashed and is replaced by a spare. Resilvering was triggered but fails to complete due to drives going offline. I have to reboot the head ( R710) and drives comes online. This happened repeatedly when

On 10/7/2015 2:15 PM, m.roth at 5-cent.us wrote: > It's an old box, a DL580 G5. And we didn't get the card with the RAID. I > suppose I can single path each RAID from the PERC H800, until budgets open > up. wait, you originally said HP SmartArrray P800. Now, its a Dell PERC H800? I'm confused. -- john r pierce, recycling bits in santa cruz

Anyone have any experience with a R510 with the PERC H200/H700 controller with ZFS? My perception is that Dell doesn''t play well with OpenSolaris. Thanks, Geoff

John R Pierce wrote: > On 10/7/2015 1:30 PM, m.roth at 5-cent.us wrote: >> No. I'm the one who got the quote and set up the order for my managers, >> and I know what it's got: the ethernet connection is to the internal >> webserver to manage the RAID. the 712S I have is dual-path SAS for data. > > then yeah, you'll need a plain SAS2 external HBA card. If

Hi, I have installed CentOS 6.4 on Dell Server R320 64bit with UEFI BIOS. Do i need both /boot and /boot/efi partitions. Please help me understand the difference between these. Regards, Kaushal

Hi, The server is running CentOS 5.8 Linux OS on Dell PowerEdge R710 having raid controller card 03:00.0 RAID bus controller: LSI Logic /Symbios Logic MegaRAID SAS 2108 [Liberator] (rev 05) /usr/sbin/smartctl -a /dev/sda smartctl version 5.38 [x86_64-redhat-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ Device: DELL PERC H700 Version: 2.10 DELL

Hello, I'm curiuos if anyone knows if it's possible to set up a Dell R515 (which has PERC H700) to be JBOD. It seems the only options are RAID0 or RAID1. I read posts, where people say it can by done by making each disk its own RAID0.? This works, but it wigs out when that disk is removed, and forgets a disk was ever there (unless I go back in the PERC and fix it). My plan is to have a

We're looking for tools to be used in monitoring the PERC H800 arrays on a set of database servers running CentOS 5.5. We've installed most of the OMSA (Dell monitoring) suite. Our current alerting is happening through SNMP, though it's a bit hit or miss (we apparently missed a couple of earlier predictive failure alerts on one drive). OMSA conflicts with mega-cli, though we may

Running CentOS 6.7, on an older HP DL580 G5. We've got a Dell 12-bay RAID box plugged into a PERC H800 (aka LSI Liberator) that we put in the HP, and that works fine. We've got a new RAID (a JetStor), and are trying to plug it in. The layout is that the Dell RAID is dual-pathed DAS. Each PERC has two DAS ports. We've got the Dell RAID in the top port of each PERC. I *thought* I could

Hi all ! Thanks for the very good support of Dell R320 hardware, perc H310 is well supported, BCM5720 seems to work correctly and performances are great. The only problem i have found is very strange. The FreeBSD bootloader take many times to load, 30sec-2minutes to boot the kernel and show the bootloader menu. After that, the system boots properly, at a normal speed. Is there any issue or

Hi folks: At work, I have an R510, and R610 and an R710 - all with the H700 PERC controller. Based on experiments, it seems like there is no way to bypass the PERC controller - it seems like one can only access the individual disks if they are set up in RAID0 each. This brings me to ask some questions: a. Is it fine (in terms of an intelligent controller coming in the way of ZFS) to have the

This is... odd. Got a 6.8 box, a Dell R320 lspci tells me 01:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 2008 [Falcon] (rev 03) so it *should* accept an SAS drive. I've got a Cheetah that's a few years old, and having pulled it out of another server (in the datecenter), I put it in this box to zero it out for reuse... and the box refuses to see the drive. *Nothing* in

Hey, I am currently considering a two machine Xen setup based on AMD Opterons, more precisely Dell R515s or R415s with dual Opteron 4274HE. Does anyone has some Xen setup(s) running on top of Opterons 4274HE, Opteron 4200 or Dell R515 machines and is willing to share some experience? In particular, I am interested in using Debian squeeze (Xen 4.0.1, Linux 2.6.32) for dom0 and most domUs. Any

I have been trying to get a feel for scaling or dimensioning using asterisk 11. if I desire to use something like a dell r320, hardware RAID, 2G E5-2420, 4G RAM and only SIP trunking using gsm (least bandwidth and no transcoding) how many calls "out" can I expect to make at one time and asterisk still be OK and responsive? Thanks, Jerry -------------- next part -------------- An HTML

I will be using a dell R320 Xeon E5-2420 2G and 4G RAM. also using a SIP trunk with ulaw/alaw codec. How many calls could I expect to make at the same time? no transcoding or anything. Just call a number and play a gsm file. Thanks, Jerry -------------- next part -------------- An HTML attachment was scrubbed... URL:

Howdy, I built an LXC container with an "image" of asterisk 11.18 precompiled and installed. It runs fine on the dev platform, which is a Dell R320 running Ubuntu 14.04LTS. I shutdown the container, tarred it up, and untarred on a Dell PE1850, also running Ubuntu 14.04LTS. The container itself is Ubuntu 14.04LTS. Both platforms as far as I know are amd64. The container boots

On 2/12/2015 12:32 PM, m.roth at 5-cent.us wrote: > I finally talked to Dell, and was told, and I quote, > <...> three terabyte drives aren't supported the raid controller installed > in this server, the SAS 6 i/r. the SAS 6/iR is a LSI SAS 1068E chip, kind of an old chip (the 1068 stuff was long ago replaced by 2008, 2308, and now 30xx stuff). The SAS 6/iR Dell article

On 7/26/2016 2:38 PM, Peter wrote: > On 27/07/16 09:11,m.roth at 5-cent.us wrote: >> >This is... odd. Got a 6.8 box, a Dell R320 lspci tells me >> >01:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 2008 >> >[Falcon] (rev 03) >> >so it*should* accept an SAS drive. I've got a Cheetah that's a few years >> >old, and having