similar to: Radeon graphics problems with CentOS 6.6

when i tried to update a new install; ~]$ sudo yum -y update Loaded plugins: fastestmirror, refresh-packagekit, security Setting up Update Process Determining fastest mirrors * base: repos.dfw.quadranet.com * extras: repos.dfw.quadranet.com * updates: repos.dfw.quadranet.com extras | 3.4 kB 00:00 extras/primary_db

Dear "nouveau" developers, I know that many very competent guys have already spent a lot of time and efforts on this issue without success. I have started to play with "hppa" two weeks ago and, with the support of the linux-parisc mailing list people, now I have a - almost fully - working workstation (hp c8000). Everythings work perfectly BUT the video card. No matter the

Dear Ilia, this page summarize all the possible options of the "nouveau" kernel module: https://nouveau.freedesktop.org/wiki/KernelModuleParameters/ I will test the options that you have suggested as soon as possible. Try a PCI video card is a very good advice because the AGP/FX1(chipset) is on the top of the "usual suspects" list; unfortunately the c8000 has 3.3 PCI slots

>.. And KMS modesetting works properly now in Xen dom0! My onboard ATI Radeon is the following: > # lspci -v | grep VGA  11:04.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02) (prog-if 00   [VGA controller]) Environment :  Xen 4.0.1-rc6 & 2.6.32.19 on top of F13 ( .config attached) [root@fedora13 ~]# lspci -v | grep VGA 01:00.0 VGA compatible controller: ATI

Ok im trying to play Counter Strike 1.6, but it crashes when i join a server. The Video is set to OpenGL and when i set it to "Software" it started working (but the quality was really shitty so i want OpenGL). I have this video card VGA compatible controller [0300]: ATI Technologies Inc RS480 [Radeon Xpress 200G Series] And when the game crashed i got this error: Code: Allocating

Not sure about the radeon issue, but "DRM: GPU lockup - switching to software fbcon" basically means "the CPU isn't able to submit commands, or the GPU isn't executing the commands". Basically the GPU can only have so many commands outstanding [well, command buffers], and we hit that limit. >From what I understand, PA-RISC has a "funny" architecture that

The very same option list, but for the "radeon" kernel module: http://xorg.freedesktop.org/wiki/RadeonFeature/#index4h2 Simone Mannori - Italy On 4 April 2016 at 05:56, Simone Mannori <simone.mannori at gmail.com> wrote: > Dear Ilia, > > this page summarize all the possible options of the "nouveau" kernel module: > >

Apparently CentOS-7 - Base is failing, what does that mean? How do I contact the upstream for the repo? How do I find a working upstream? More info from command execution: do_ypcall: clnt_call: RPC: Timed out do_ypcall: clnt_call: RPC: Timed out http://mirror.supremebytes.com/centos/7.0.1406/os/x86_64/repodata/3cda64d1c161dd0fead8398a62ef9c691e78ee02fe56d04566f850c94929f61f-filelists.sqlite.bz2:

I just installed centos 7, yum is acting strange, experiencing RPC time-outs. Sometimes when I disable the additional repos (epel and rpmforge) it seems to make things act normal. But not this time (see below). Could I have some misconfiguration? Network glitch? What hypotheses should I be considering? Thanks, Dave [root at localhost ~]# yum repolist repo id

What is the best way to specify which mirrors off a repository you want to use? Have a host with rather restricted egress rules and want to allow it to reach a couple of mirrors for each repo it needs. And, yes, I am not ready to mirror them locally.

[root at build6 ~]# cat /etc/redhat-release CentOS release 6.5 (Final) [root at build6 ~]# [root at build6 ~]# uname -a Linux build6 2.6.32-431.23.3.el6.x86_64 #1 SMP Thu Jul 31 17:20:51 UTC 2014 x86_64 x86_64x86_64 GNU/Linux [root at build6 ~]# yum clean all Loaded plugins: fastestmirror, security Cleaning repos: base extras updates Cleaning up Everything Cleaning up list of fastest mirrors

I''ve been trying to set up a VGA-passthrough on my Ubuntu 12.04 box to run Windows (for gaming) while leaving my RAID-5 array available (managed by Linux). First, here are the machine specs: CPU: AMD A8-3870K 3.4GHz Quad-Core APU GPU: APU-integrated AMD Radeon 6550 (shared memory) Mobo: ASUS F1A75-V EVO with AMD-virtualization enabled in UEFI-BIOS RAM: 8GB DDR3 1866 G-Skill Sniper

Hi Guys Apologies in advance for the noise. I am interested in setting up my OWN mirrorlist like http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=os&infra=stock where it pulls a few local mirrors, but mine would be statically set with 3 or 4 different location URL's Basically my plan here is, if the closest mirror I operate cannot be reached, it will try another

Package: xen-hypervisor-4.1-amd64 Version: 4.1.4-3+deb7u1 Severity: normal Hello, I was running Xen for a few years and after a PSU failure I never got the system working stable again. I suspected damage to the board so I replaced everything in the system piece by piece but Xen enabled kernel always crashes even with only Dom0 running when moderate amount of IO happens on the box. kvm seems

Am Mittwoch, den 06.05.2020, 10:26 -0400 schrieb Ilia Mirkin: > [please keep list cc'd in your replies] > > On Wed, May 6, 2020 at 10:15 AM Milan Bu?ka <milan.buska at gmail.com> wrote: > > [ 0.000000] Linux version 5.6.10-zotac (root at saux) (gcc version 9.3.0 (SAUX Aarch64)) #1 SMP PREEMPT Tue May 5 22:16:40 CEST 2020 > > [ 0.000000] Machine model: NVIDIA

I''ve compiled the 3.0-devel version on SUSE Linux 9.3. The ony problem is the qla2300 driver, which will not start all correctly on boot. So i cannot see other partitions than sda. --------------------------------------------------------------------------------- QLogic Fibre Channel HBA Driver ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 24 (level, low) -> IRQ 185 qla2300

Ok, I have an update to this problem. I added the nouveau list because I can't quite tell if the issue is: - the PCIe changes that went in 5.6 I think (or 5.5?), referenced below - a new issue with thunderbold on thinkpad P73, that seems to be triggered if I have a USB-C yubikey in the port. With 5.7, my issues went away if I removed the USB key during boot, showing an interaction

Hi, have anybody a hint how i could avoid the cumbersome way (..especially the value part) change the data representation from n column data.frame to an stacked representation. many thanks Christian #example data dfw <- as.data.frame(matrix(runif(10*10),ncol=10)) dfw$group <- sample(c("X","Z"),nrow(dfw),replace=T,prob=c(0.75,0.25)) # change var <-

Hi, I really need help. I spent 2 days already on this pci passthrough thing. I''m using Xen 3.2.1 with Centos 5.2 64 bits on intel VT. I''d like to use PCI passthrough and I don''t think I need VT-D functionality. I''m trying to pass PCI 12:01.0 to my domU guest. I got this error when I use "xm create /etc/xen/hvm_centos_2.cfg" Using config file

Hi all, did somebody successfuly export ISDN Cards to DomU? I want to have 2 ISDN Cards in DomU (for Asterisk with mISDN) lspci -vt -[0000:00]-+-00.0 nVidia Corporation MCP55 Memory Controller +-01.0 nVidia Corporation MCP55 LPC Bridge ... +-05.1 nVidia Corporation MCP55 SATA Controller +-06.0-[0000:01]--+-00.0 Cologne Chip Designs GmbH ISDN