similar to: Seeing dropped packets / tcp retrans on latest 4.4.1-10el6

So I might have been misinterpreting things here and might be way off base. I think you can ignore this thread and I'll follow up if I get anything concrete down the road =) The retranmissions I'm seeing and reproducing are probably within normal allowances and can't reproduce the issue that originally lead me down this path. - Nathan > -----Original Message----- > From:

Hi All, Some more data on this, I've reproduced this on another host that's a completely stock centos/xen deployment with a centos 6.6 domU. Since I?m seeing the retransmissions on the VIF, I don't think it's related to the network stack but just in case.. Each host is connected via LACP with vlan tagging to a pair of stacked cisco 3750's. Host networking config is here:

Hi All, I've tracked this down... We do rate limiting of our vms with a mix of ebtables/tc. Running these commands (replace vif1.0 with the correct vif for your VM) will reproduce this: ebtables -A FORWARD -i vif1.0 -j mark --set-mark 990 --mark-target CONTINUE tc qdisc add dev bond0 root handle 1: htb default 2 tc class add dev bond0 parent 1: classid 1:0 htb rate 10000mbit tc class

Dear Nouveau developers, I have a Dell precision M3520 laptop and I have installed fedora 26 but the nouveau driver does not seem to recognise my graphic card NVIDIA Quadro M620. Indeed I can't see it in the llist of the supported card. Do you have any idea whether it will become available and when? Thank you for your help. All the best, Patrick

Dear all, I'm currently running R on my laptop -- a Lenovo Thinkpad X201 (Intel Core i7 CPU, M620, 2.67 Ghz, 8 GB RAM). The problem is that some of my calculations run for several days sometimes even weeks (mainly simulations over a large parameter space). Depending on the external conditions, my laptop sometimes shuts down due to overheating. I'm now thinking about buying a more

On Mon, Jan 22, 2018 at 10:38 PM, Nathan March <nathan at gt.net> wrote: > Just a heads up that I'm seeing major stability problems on these builds. > Didn't have console capture setup unfortunately, but have seen my test > hypervisor hard lock twice over the weekend. > > This is with xpti being used, rather than the shim. Thanks for the heads-up. It's been

Hi Michal, Thank you for your suggestion. My apologies that I took sometime to get back on further confirmation. Regrettably, my tshark is still unable to find libvirt payload inside packet capture, though it lists libvirt as a possible filter. # rpm -ql libvirt-wireshark-1.2.9.3-2.fc21.x86_64 /usr/lib64/wireshark/plugins/1.12.5/libvirt.so As I used wireshark 1.12.6 version, I

Hi, I have several servers Supermicro - running Xen 3.4.1 @ debian 5.0 x64 running without any issues for more than year. Now I bought new server with exactly same config and installed Ubuntu 10.04 x64 - Xen 4.0.1-rc4 - 2.6.32.16 pv_ops - base Ubuntu 10.04 install boot without issues - Xen 4.0.1-rc4 compiled and installed withou any problems - 2.6.32.16 pv_ops dom0 kernel with custom config.

Antony, It is correct. Noone connects to Asterisk box/server from outside.Callcentric SIP trunk configured and Asterisk maintains connection to it itself. No special ports opened, nothing. Connection happens from us to Callcentric and all calls routed in from CallcentricI don't know exactly how it's doing it by it works. Again, keep in mind it is working for many years for most / 90+% of

Hi, I am trying libvirt plugin in wireshark to dissect RPC payload in TCP, but finding dissector code not really working. My env is Fedora core 21 (x86_64) and installed packages are as follow: wireshark-1.12.6-1.fc21.x86_64 libvirt-wireshark-1.2.9.3-2.fc21.x86_64 Earlier, just after installation, I noticed libvirt.so available only in /usr/lib64/wireshark/plugins/1.12.5/ . Wireshark

Thank you Michal. With your pcap, I could confirm that, libvirt dissector worked in my environment as well. Yes, it could be that, my pcap do not have libvirt rpc packets correctly though I would have expected. I am checking on it. Regards, Gowrishankar On Thursday 07 January 2016 03:51 PM, Michal Privoznik wrote: > On 07.01.2016 08:05, gowrishankar wrote: >> Hi Michal, >>

Hi, Doing some extensive benchmarks on BTRFS, I encountered a kernel bug in BTRFS (as reported in dmesg) Maybe the information below can help you making btrfs better. Situation Doing an intensive sequential write on a SAS 3TB disk drive (SEAGATE ST33000652SS) with 128 threads with Sysbench. Device is connected through an HBA. Blocksize was 256k ; Kernel is 3.3.0 (x86_64) ; Btrfs is version

Hi All Yesterday i had installed wireshark on my centos box which does not have the GUI , It is actually a hardened box. I installed the tool using the following command: yum install wireshark After installation i dont know how to proceed further in capturing the packets. I basically want to capture packets and copy them onto my windows box. On the windows box i can use the Wireshark UI to

Hi, i'm trying to analyze kerberos traffic using tshark (Samba 4.8.1 on Centos 7). I can't figure out how to extract keytab with password/keys. I follow precisely the instructions at https://wiki.samba.org/index.php/Keytab_Extraction But it seems like I only get slot, kvno and principal, can't find a way to get passwords or keys. Any idea someone ? ktutil: rkt decode.keytab ktutil:

Hi Laine What you have suggested sounds eminently reasonable. Thanks for your advice. I'm going to give it a shot and report back. Richard On 11/27/19 1:38 PM, Laine Stump wrote: > On 11/26/19 11:07 PM, Richard Achmatowicz wrote: >> Hello >> >> I have a problem with attaching VMs to a VLAN interface. >> >> Here is my setup: I have several physical hosts

On Fri, 2017-02-17 at 11:11 +1300, Gary Lockyer wrote: > Script to provide an anonymous summary from tshark > > The tshark command needs to output a PDML XML stream, which this > command > will read. The summary is intended not to expose private or customer > data while allowing a good view on the range and frequency of the > network traffic. The script Gary posted, which is

Hello, This is not technical post, just looking for suggestions on what to check.I have asterisk for long time, no updates, just maintain OS updates. I use SPA504G phones Very rarely and randomly when we pickup a phone - other side does not hear us. Call them back and all works. Now I have couple people I'm talking to and it seems like very call like this. Someone can't hear someone.

I''ve recently upgraded SLES to use LibXenLight and have noticed that my virtual machines no longer restart when "xl restart X" or the reboot commands are used within the VM. Instead the machine seems to get destroyed. The configs for the VMs have not changed since well before the update. Here is what one looks like: name = ''vm1'' maxmem =1024 memory = 1024

On Mon, 15 Jan 2018, Aurélien Aptel wrote: > "Barbara M. via samba" <samba at lists.samba.org> writes: >> Anyway, tried your hint. >> No difference for the specific win 10 client. Still can't connect. >> All other Win 10 and the 2016 tested still works as usual. >> smbstatus still reports the "strange" rows: > > Try looking at a

Even more puzzling, I reverted back to the old configuration to confirm what I had seen and found that it works in one direction but not the other: i.e. from 192.168.0.110 to 192.168.0.120, but not the other way around. Must be something with my configuration....which I can follow up on. So, thanks again for your help. Richard On 12/3/19 11:36 AM, Richard Achmatowicz wrote: > Laine >