similar to: clustering technique using lsi

Hello sir, You have interpreted correctly that clustering will be done by generating the ring around the Document(i.e. the basic idea of LSI). But it is not like increasing the radius and the next shell will be another cluster, Rather it would pick one document (based on relevance score) and form a ring around it to cluster the document, then from the remaining documents(not in the cluster but

I am interested in clustering of search results idea, I know clustering techniques from the perspective of Machine learning! And I am figuring out the way to implement machine learning technique for clustering search result. I had 5-month back a project on LSI(latent simantic indexing and raking the search result) through that if I am given the TF-IDF matrix then clustering can be done quickly and

Hello sir! Thank you for your gentle reply, I have visited to the github repository before but the code was not commented properly still I am trying to understand and figure out the redundant task in the algorithm by reading the code. For the same I asked you if there is any other document or information is available with you which can help me to understand it better would be great. It's okay

You mean, to take review on proposal I need to create an application? and if it is the case then please tell me how to create application? On Tue, Mar 22, 2016 at 6:24 PM, James Aylett <james-xapian at tartarus.org> wrote: > On Tue, Mar 22, 2016 at 12:49:58PM +0530, MURTUZA BOHRA wrote: > > > I have prepared a draft proposal for clustering problem. If you have > >

sir, Till now I was confident enough to handle this project in the summer but the only thing which I had a little concern was the algorithm that I proposed. The thing is previously while writing the proposal I did not read much research papers on clustering, just the few I read and an idea strike to me and I wrote the proposal and discussed with you. But for last few days I was searching for the

Sir, I have prepared a draft proposal for clustering problem. If you have previous year's accepted proposal please share it, that would be very helpful. And also I have attached my proposal, please review it. Thanks On Mon, Mar 21, 2016 at 7:10 PM, James Aylett <james-xapian at tartarus.org> wrote: > On Sun, Mar 20, 2016 at 11:39:37PM +0530, MURTUZA BOHRA wrote: > > >

On 8/17/2016 7:46 AM, Fawzy Ibrhim wrote: > There's no option in BIOS to disable the RAID mode; this is NEC servers !! huh. i've never seen anyone using the lsi megaraid firmware with intel SATA ports, so thats two things weird about NEC, kinda glad I don't ever see those. -- john r pierce, recycling bits in santa cruz

Hi, I have been trying to install CentOS 5.4 on a Intel SR1530SHS, Intel S3200SH mainboard.. It has a 3 x 1TB sata hotswap drives with LSI software raid onboard. I had configured the LSI to have Sata0 and Sata1 with raid 1 and the third drive as a hotspare drive. Format the harddisk and installation was a breeze. The server rebooted into a blank screen and the cursor just keep blinking. Please

I'm trying to install CentOS 5.4 on a machine with a LSI SAS 1068E controller. I've googled all over the place and found a few different drivers for RHEL5 for it.. and tried a few of them.. Some will load, some complain that this isn't the correct version.. non of them work when it comes to showing Hard Drivers in the partition manager. The machine is a Supermicro SYS-6015V-M3

Thank you for your help. Le 05/01/2015 19:10, John R Pierce a ?crit : > works here fine on the 9261, which is an OEM version of the same card > with the connectors in a different orientation... you might check your > LSI firmware revision. My firmware seems to be more up to date. Anyway, I will try to update firmware. I have to check how to do that. # dmesg |grep LSI scsi4 : LSI SAS

Is anybody here monitoring Dell SAS6/iR RAID health? I have a mix of CentOS 5.9 and 6.3 installs on the PE1950s. I'm finding drivers and Megaraid Storage Manager downloads via LSI's site, but I'd prefer not to install a bunch of crapware. All I need is the proper LSI daemon which exports info via SNMP. I've used check_sasraid_megaraid Nagios script [0] in the past for PERC5i and

Happy new year ! We have a SuperMicro server with a LSI MegaRAID 9260-4i controller. Since Centos 6.6 update (kernel 2.6.32-504), the controller doesn't initialize at boot. Reverting to kernel 2.6.32-431 allows server to boot fine. The server can't boot due to a bug in LSI megaraid module. Boot log ends by a lot of lines: RESET_GEN2: retry=xxx, hostdiag=a4 I tried Centos 6.6

I have 15x SAS drives in a Dell MD1000 enclosure, attached to an LSI 9200-16e. This has been working well. The system is boothing off of internal drives, on a Dell SAS 6ir. I just tried to add a second storage enclosure, with 15 more SAS drives, and I got a lockup during Loading Kernel. I got the same results, whether I daisy chained the enclosures, or plugged them both directly into the LSI

Hey, anyone using an LSI MegaRAID experienced "disappearing drives"...? We installed 6 new C6 servers, each with a Supermicro SMC2108 (LSI MegaRAID) controllers and 3 PX-128M5Pro SSDs ( RAID1 + hostswap). 2 weeks (and almost no activity on it, since not in production, apart from installation) later, megacli sees (based on the slot numbers): - on one server: only the 2nd disk of the RAID

I've got a box running C7, just updated (yesterday). It had an onboard RAID controller, and an HBA. I just installed a new, additional RAID card, all LSI. MegaCli64 only sees one controller. I can't seem to find the magic to see the others. I *know* the new card is a MegaRAID - the box it came in says so. The system sees it 1:00.0 RAID bus controller: LSI Logic / Symbios Logic SAS1078

i'm configuring a storage server with CentOS 6.2, it uses a LSI MegaRAID SAS controller, I'm using LSI's megacli to configure the storage... Any ideas on how to get drive failure notifications out of this system? I'm configuring hot spares but I'd still like some sort of notification when a drive has failed so the spare can be replaced. -- john r pierce

Scott Silverman wrote: > On Tue, Jul 10, 2018 at 12:37 PM, mark <m.roth at 5-cent.us> wrote: > >> I've got a box running C7, just updated (yesterday). It had an onboard >> RAID controller, and an HBA. I just installed a new, additional RAID >> card, all LSI. >> >> MegaCli64 only sees one controller. I can't seem to find the magic to >> see

Hi all, trying to edit a domain xml to enable an LSI SCSI controller I get the following error: error: unsupported configuration: This QEMU doesn't support the LSI 53C895A SCSI controller It is my understanding that the error is raised due to RedHat disabling this controller in its own qemu-kvm builds. This seems an unfortunate decision, as it makes harder to migrate from VMWare (which

Hello, I am trying to pass my LSI SAS 2008 controller to my PV domu (openindiana) and I can not get it working. I have read that xen does not support the loading of option ROM''s in pv domu''s and that this support is being, or will be, added. http://markmail.org/thread/2njw43iaurmvzlys This post is more than a year old now. I am wondering if there is a way to get my LSI SAS

John R Pierce wrote: > On 7/26/2016 10:20 AM, Fawzy Ibrhim wrote: >> I want to install Centos 7 latest build on NEC Server 5800/120b-2. >> >> The installation wizard fails to detect the storage connected to LSI >> SATA MegaRaid PCI. > > which megaraid card? they've made quite a lot. lspci will list the > card type... > > linux will only see storage