similar to: about the new added attributes "check" and "type" for interface mac element

Dear CentOS-Community, we are facing the following issue: A secondary ip address seems to be automatically added to a nic which causes several issues in our setup. This server is equipped with four nics which are currently in use: # nmcli con show NAME????? UUID????????????????????????????????? TYPE????? DEVICE eno2????? cb6fcb54-be52-4ab6-8324-88091a0ea1a0? ethernet? eno2 eno4?????

On 9/6/20 12:02 PM, daggs wrote: > Greetings LAine, > >> When you say "the vm", you mean the one running libreelec, that is >> trying to get and IP address, correct? > > yes, you are correct. > >> I guess Broadcom.home is the IP of the VM that's running the dhcp >> server? (I should have suggested using "tcpdump -n -e -v" :-/)

Guys, what i noticed. Look at this. Refused- 1/3/0 (Class 254) ( /24 ) Paully used /16 update 1/3/1 (Class 254) CNAME V-RDS02.mydomain.com CNAME ? And, if he uses in his example samba-tool dns add dc3 mydomain.com V-RDS02 A 130.130.0.252 A record was used. Is resolv.conf checked and it is sure in pointing to the correct DNS of the AD first? addresses: -

Have you tried to use NetworkManager ? After all ,anything network related should be done by it. [root at system ~]# nmcli connection add con-name dummy0 ifname dummy0 type dummy ? Connection 'dummy0' (9fdd74fa-c143-4991-9bac-0e542704ac89) successfully added. [root at system ~]# reboot Shared connection to glustera closed. [root at system ~]# uptime 03:23:44 up 0 min, ?1 user, ?load

Date: Wed, 27 Jun 2018 20:45:44 -0400 From: Jonathan Billings <billings at negate.org> > On Wed, Jun 27, 2018 at 05:14:06PM -0400, mark wrote: > >> I do see one option of "defgw macaddr" - is that supposed to be a MAC >> external to the server, or can I use the MAC of eth1 (or whatever the >> stupid, unrememberable name is)? > > As mentioned earlier,

> Dear CentOS-Community, > > we are facing the following issue: > > A secondary ip address seems to be automatically added to a nic which > causes several issues in our setup. Hi, Can you show as the config of eno4? And can you diff the config of eno1 and eno4. Looks like there is a difference somewhere. Regards, Simon > > > This server is equipped with four nics

Dear Samba-List, i'm new to the list and new to samba. Right now I'm trying setup a samba ADDC serving around 50 Windows 10 clients and a couple of linux clients. My ADDC Host has two NICs, eth0 should be connected to the wan - network, eth1 should be connect to a 10.* network, serving the windows and linux clients. The ADDC is up and running, serving only the 10.* network. I

Hello all I have weird problem i can't understand and don't know where to look. [root at chamber ~]# ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host

Hello! I am trying to do the command: *net rpc rights grant "SAMDOM\Unix Admins" SeDiskOperatorPrivilege -U "SAMDOM\administrator"* *could not connect to server 127.0.0.1* *connection failed: NT_STATUS_CONNECTION_REFUSED* All steps from original samba wiki. The distro is Opensuse 15.1 64 bits, on Oracle VM, static IP. I did read several blogs, docs, samba mailing list. Trying

hi everyone, so,first it seemed a trivial question to me, but since I could not find anybody being neither able to answer this question nor giving a short config example. after a few sleepless nights and exhausting all the reading and research. here I am sharing my problem with all of you, in the hope of some possible solution/sugestion. or is it that this is impossible?? below my

Got a problem: a user's workstation froze. He wound up rebooting, without calling me in first, so I dunno. But, and this is a show-stopper, when it came up, it came up with the firmware MAC, not the spoofed one. In /etc/sysconfig/network-scripts/ifcg-eth0, I've got the spoofed MAC address, and a UUID. In the grub.conf, I've got net.ifnames=0 biosdevname=0. But when I logged onto his

Anyone have any ideas? It's rather annoying that I can't get these to persist across reboots without using some kind of helper script. On Fri, Oct 16, 2020 at 6:37 AM Frank Even <lists+centos.org at elitists.org> wrote: > > Hello all, hoping someone can help me out here. > > I cannot get dummy interfaces on a new Cent8 build to persist across reboots. > > On Cent7

This is my system info: Debian Release: 10.5 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 5.4.60-1-pve (SMP w/16 CPU cores) Kernel taint flags: TAINT_PROPRIETARY_MODULE, TAINT_OOT_MODULE Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en (charmap=UTF-8) Shell: /bin/sh

Hello all, hoping someone can help me out here. I cannot get dummy interfaces on a new Cent8 build to persist across reboots. On Cent7 - this is the process I use: Create Dummies: # cat /etc/modules-load.d/dummy.conf dummy # cat /etc/modprobe.d/dummyopts.conf options dummy numdummies=4 # ip link add dummy0 type dummy ## - repeating a/ ascending dummyN adapters for as many needed # service

No. Network Manager is always disabled on our builds since at least Cent5 days. The network stack has always been able to be managed properly without relying on Network Manager. Is that now an absolute requirement? It never has been prior. On Mon, Oct 26, 2020 at 6:26 PM Strahil Nikolov via CentOS <centos at centos.org> wrote: > > Have you tried to use NetworkManager ? > After

someone recommended that i should give br0 the same hardware address as eno2. I did that, and restarted the vm, and it still does not work. Here is my current host interface config: ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft

Requirement is a very strong word , but you should consider using it and here is a short demo why: - By default, RHEL uses NetworkManager to configure and manage network connections, and the /usr/sbin/ifup and /usr/sbin/ifdown scripts use NetworkManager to process ifcfg files in the /etc/sysconfig/network-scripts/ directory. [root at system ~]# ls -l /usr/sbin/ifup lrwxrwxrwx. 1 root root 22 21

On Sun, Nov 10, 2019 at 11:00:20AM +0000, Rowland penny via samba wrote: > On 10/11/2019 10:49, andi via samba wrote: > > Hello, > > > > I have configured an samba AD DC for use with > > some windows and linux machines. The linux machines use > > samba for user auth and also as kerberos kdc for > > nfs mounts. This works fine so far but after a while >

Hello Lars, Thanks for your feedback. Unfortunately I made an error in writing the network I expected to connect to. I meant 10.3.0.0/24 The one I wrote in fact was one network of the already established VPN. I have included full details of my relevant files below. Background: I am trying to set up a second VPN between two servers: gtdb and db2. Both servers are already part of separate

Hello, I have configured an samba AD DC for use with some windows and linux machines. The linux machines use samba for user auth and also as kerberos kdc for nfs mounts. This works fine so far but after a while the user can not access the nfs shares anymore. I tried to analyze the problem and finally found, that the obtaining a ticket for nfs service failes in this case because of a wrong