similar to: Attaching DVD-writer

2020-04-17 11:37 skrev Peter Krempa: > [please don't top post] > > On Fri, Apr 17, 2020 at 10:54:24 +0200, Andreas Thörn wrote: >> I’ve tried that post .. but either I get a new scsi passthrough >> controller in device manager, but no dvd or the boot in windows hangs > > Note that you don't have to add a scsi <controller> if you already have > one.

[please don't top post] On Fri, Apr 17, 2020 at 10:54:24 +0200, Andreas Thörn wrote: > I’ve tried that post .. but either I get a new scsi passthrough controller in device manager, but no dvd or the boot in windows hangs Note that you don't have to add a scsi <controller> if you already have one. You can add the drive to the existing one. > > Either that method won’t

I’ve tried that post .. but either I get a new scsi passthrough controller in device manager, but no dvd or the boot in windows hangs Either that method won’t work anymore or my config is bad .. im not really sure what to put in controller, target, bus and unit .. Skickat från min iPad > 17 apr. 2020 kl. 08:38 skrev Tony Brian Albers <tba@kb.dk>: > > Hi Andreas, > >

Hey guys, Thanks a lot for the CentOS 6 distro. I am having trouble burning the i386 dvds. I tried on a RHEL 6 deskop and also a CentOS 5 laptop. The command I am running on both systems is this: growisofs -dvd-compat -speed=4 -Z /dev/sr0=/home/gsgatlin/CentOS-6.0-i386-bin-DVD/CentOS-6.0-i386-bin-DVD.iso The error I am seeing is: :-( /dev/sr0: 2295104 blocks are free, 2297586 to be written!

<!-- @page { size: 8.5in 11in; margin: 0.79in } P { margin-bottom: 0.08in } --> I'm having a problem mounting my new CDRW DVD in my new machine I just built. The motherboard is an Intel DP35DP, and I connected the CDRW DVD via ribbon cable into the motherboard IDE slot. Centos 5.1 is installed and functioning fine so far (other than this problem). I can't mount the

Problem has been solved: "sudo mount -t iso9660 /dev/cdrom /mnt/cdrom -o" mounted the drive after adding "mount /mnt/cdrom" to /etc/festab. ----- Original Message ---- From: Pam Astor <pamastor at yahoo.com> To: centos at centos.org Sent: Monday, March 17, 2008 1:45:16 PM Subject: [CentOS] CDRW-DVD Mount Problem, Centos 5.1, Intel board... <!-- _filtered

Hi e, I am normally use gnome and would do the following to make my CD / DVD mount with exec gnome-mount --write-settings --device /dev/sdc0 -o exec What is the equivalent in KDE ? My initial research suggests that I actually have to write a custom udev rule to achieve this. This has led me as far as running udevinfo -q path -n /dev/scd0 udevtest /block/sr0 (the output is below) My

I installed Centos 5.2 on a brand new computer the other day. It has an Asus DVD RW drive in it which I used to boot the netboot disk off of to install the operating system so it found the dvd at that point. Now k3b tells me that it can't find any drives. [nathalie at jeff ~]$ ll /dev/scd0 brw------- 1 nathalie disk 11, 0 Mar 10 14:00 /dev/scd0 [nathalie at jeff ~]$ ll /dev/cdrom*

COPY YOUR DVD's!! Why Spend upwards of $4000 on a DVD Burner when we will show you an alternative that will do the exact same thing for only $19.95? You heard us right - for the price of just 1 DVD's, we'll show you how to back up and/or create Your Own DVD's! Just upgraded to a DVD and still have a ton of VHS tapes lying around? With this program, not only can you burn &

COPY YOUR DVD's!! Why Spend upwards of $4000 on a DVD Burner when we will show you an alternative that will do the exact same thing for only $19.95? You heard us right - for the price of just 1 DVD's, we'll show you how to back up and/or create Your Own DVD's! Just upgraded to a DVD and still have a ton of VHS tapes lying around? With this program, not only can you burn &

On my machine I have SATA0: HD SATA1: HD these two drives are set as RAID1 SATA2: HD extra SATA3: DVD SATA4: external USB disk Snip from dmesg shows the ATAPI device being detected. ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xe400 irq 10 ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xe408 irq 10 ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ATAPI: PIONEER BD-ROM

On Mon, Jun 24, 2019 at 3:35 AM Pete Biggs <pete at biggs.org.uk> wrote: > On Sun, 2019-06-23 at 22:13 -0400, doug schmidt wrote: > > Hi, > > I'm having an issue with my Thinkpad P70 laptop/workstation. This system > is > > a dual boot, > > windows 10 pro and centos 7. I have not needed to use the cdrom until > now, > > however the system does not

FUCK OFF U Arse hole - y would I pay U 19.95 wen I can DivX myself - NoW PISS OFF MUTHERFUCKER ----- Original Message ----- From: <dvdburner@ewasher.org> To: <josesmid@hotmail.com> Sent: Monday, January 21, 2002 1:56 PM Subject: [icecast] The best way to DVD <p>> COPY YOUR DVD's!! > > Why Spend upwards of $4000 on a DVD Burner when we will show you an alternative

Hi I have absolutely no idea what does it means : --------------------- Kernel Begin ------------------------ WARNING: Kernel Errors Present Buffer I/O error on device sr0, l ...: 16932 Time(s) end_request: I/O error, dev sr0, sector ...: 16962 Time(s) ---------------------- Kernel End ------------------------- I am getting this all the time a lot of times as you

On 07/05/15, Gordon Messmer wrote: That's not the same as checking the media for corruption. You may be able to read all of the files, but if the data is corrupt, rpm may throw and IOError. So, the next thing to do is check your media. The DVD should offer to do that first when you boot from it. ------ Above quoted -------- Booted the DVD again, took the default. It got to 76.2% then

I can't seem to get an external DVD drive to show up on an CentOS 7 server. Wondering if it's just missing a driver or if I'm missing something fundamental. It's an external USB device that works fine on my Fedora 21 Laptop, but I never get a /dev/ entry (EG: /dev/sr0) on the server. What can I do to make this thing work? [root at norman ~]# tail -f /var/log/messages; #

Hello, I installed this game thanks to the DVD. So, when the installer ask me to place the 2nd DVD in the dvd drive, i can eject the first DVD. So, i place the second DVD but after, the DVD is not mounted automaticaly. I tried to launch this command : mount /dev/sr0 /media/cdrom but without success, the dvd2 is always umounted... I can't install completly the game with this problem. Thanks

Hi All, Scientific Linux 7.2 I am drawing a blank on Google here. I am, trying to boot a qemu-kvm virtual machine off of /dev/sr0 (my DVD). But I get the following error Error starting domain: internal error: qemu unexpectedly closed the monitor: 2016-12-22T00:00:30.330333Z qemu-kvm: -drive file=/dev/sr0,format=raw,if=none,media=cdrom, id=drive-sata0-0-0,readonly=on:

CentOS-6.9 I am trying to verify a locally created dvd. I am using sha256sum in this fashion: sha256sum /dev/sr0 Which gave this result: sha256sum: /dev/sr0: Input/output error So I tried this: sha256sum /dev/cdrom Which, after some time, also produces: sha256sum: /dev/cdrom: Input/output error What does this mean and how do I fix it? -- *** e-Mail is NOT a SECURE channel

On Mon, Apr 24, 2017 at 12:53:36PM -0400, James B. Byrne wrote: > > CentOS-6.9 > > I am trying to verify a locally created dvd. I am using sha256sum in > this fashion: > sha256sum /dev/sr0 > > Which gave this result: > > sha256sum: /dev/sr0: Input/output error > > > So I tried this: > sha256sum /dev/cdrom > > Which, after some time, also