similar to: Slow ssh

I’ve tried that post .. but either I get a new scsi passthrough controller in device manager, but no dvd or the boot in windows hangs Either that method won’t work anymore or my config is bad .. im not really sure what to put in controller, target, bus and unit .. Skickat från min iPad > 17 apr. 2020 kl. 08:38 skrev Tony Brian Albers <tba@kb.dk>: > > Hi Andreas, > >

2020-04-17 11:37 skrev Peter Krempa: > [please don't top post] > > On Fri, Apr 17, 2020 at 10:54:24 +0200, Andreas Thörn wrote: >> I’ve tried that post .. but either I get a new scsi passthrough >> controller in device manager, but no dvd or the boot in windows hangs > > Note that you don't have to add a scsi <controller> if you already have > one.

This does not look bad, pretty ok. But im do have a question here. > ipaddress: 10.103.1.6 X.X.103.1 This indicated that the primary interface is eno2 > 2: eno2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP > ??? inet 10.103.1.6/24 brd 10.103.1.255 scope global eno2 > 3: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP > ??? inet

+1 "penny" :-) :-) for my thoughts.. :-p But yes, that should fix it. I also suggest, review your logs, you wil notice more messages. Rsyslog/apt/snmp/postfix/ntp need manual changes after the upgrade. At least these, maybe more but these are the one i've encountered. Greetz, Louis > -----Oorspronkelijk bericht----- > Van: samba [mailto:samba-bounces at

Dear list, we use debian stretch with Louis's 4.10.5 packages and bind9_dlz backend. There are two AD DCs with redundant ISC DHCP servers on them. The DHCP servers are updating the DNS along the lines of https://wiki.samba.org/index.php/Configure_DHCP_to_update_DNS_records_with_BIND9 but with nsupdate commands replaced by suitable calls to "samba-tool" (I had problems getting the

Hi, I'm trying to install a qemu-kvm virtual machine on a Debian GNU/Linux squeeze amd64 host, using virtinst 0.500.3 and libvirt 0.8.3. First I tried this command as a normal user (in groups kvm and libvirt): $ virt-install --connect qemu:///system --name test1 \ > --ram $((128 * 1024 * 1024)) --vcpus=1 --description 'Test VM 1' \ >

Hi all, I've been bugged by this issue for a while, and while I see that the \UNSEEN flag is specified in the RFC to be reset once *any* client connects and looks at a mailbox, I was wondering if there's a way to change the behavior so that it's tracked on a per-client basis? Or if there's even some way to turn it off so that both my iPhone mail client and my main emacs viewmail

Good day Guys I forgot to add and mention a very important piece of the puzzle. We are making use of dovecots compression plugin. I.e. https://doc.dovecot.org/configuration_manual/zlib_plugin/#compression Regards Brent Clark On 2019/11/11 14:49, Brent Clark wrote: > Good day Aki > > Thanks ever so much for replying. > > Interesting that you ask the version of dovecot. Any

Hi! recently we upgraded a Debian jessie server to Debian buster, with Samba being upgraded from 4.5.12 (+dfsg-2+deb9u3) to 4.9.5 (+dfsg-5+deb10u1). A few hours later we saw these errors in syslog: smbd[26024]: [2020/02/03 11:13:13.631613, 0] ../lib/ldb-samba/ldb_wrap.c:79(ldb_wrap_debug) smbd[26024]: ldb: Failure during ltdb_lock_read(): Locking error ? Busy smbd[26024]:

On 18/05/2019 10:22, Hendrik Friedel via samba wrote: > Hello, > > I a bit surprised to get no replies at all... > How come? Lack of information? Lack of clarity? > > Greetings, > Hendrik > No, probably a lack of users using your combination of Samba, btrfs and quotas. Of course, more info may help, what is in your smb.conf etc. Why are you using a filesystem that your

Hai, cat "/var/lib/samba/private/named.conf" also please. And check if the correct bind9_dlz is enabled. dpkg -l | grep bind9 Jessie, should be 9.9 Stretch should be 9.10 If this server was upgraded then you need to manualy adjust the file above. Looks to my bind9-dlz is enable in smb.conf but not loaded. cat /var/log/daemon.log | grep dlz You should see thing like: samba_dlz:

>>>>> "Sami" == Sami Ketola via dovecot <dovecot at dovecot.org> writes: >> On 1 Oct 2019, at 21.45, John Stoffel via dovecot <dovecot at dovecot.org> wrote: >> >> >> Hi all, >> >> I've been bugged by this issue for a while, and while I see that the >> \UNSEEN flag is specified in the RFC to be reset once *any*

Samba - General mailing list wrote > Hai, > > cat "/var/lib/samba/private/named.conf" also please. > And check if the correct bind9_dlz is enabled. > > dpkg -l | grep bind9 > Jessie, should be 9.9 > Stretch should be 9.10 > If this server was upgraded then you need to manualy adjust the file > above. > Looks to my bind9-dlz is enable in smb.conf

Hello >No, probably a lack of users using your combination of Samba, btrfs and quotas. I would have thought that btrfs is becoming more mainstream now. And then, Samba and Quotas should be rather common... > >Of course, more info may help, what is in your smb.conf etc. Added at the end of this mail. >Why are you using a filesystem that your OS doesn't officially support ? That

Hello, iam currently trying to run LXC Containers with libvirt but the memory limit doesn't want to work in the container i see the full 32GB from the Host OS iam pretty sure that iam missing a configline in the xml lxc-template ~ # free -m total used free shared buff/cache available Mem: 32108 626 31396 249 85

Hello, my smb.conf is: [global] workgroup = DIRECTORY interfaces = 10.10.10.1 security = user map to guest = Bad User rndc command = /bin/true [iso] comment = ISO browseable = No public = Yes guest only = Yes writable = No directory = /export/ISO I'm using Debian 9.5 with samba version

Hi, I know this might be the most asked question, so I've done anything possible to troubleshoot the problem myself, but still, my SSH Agent Forwarding is not working for me. The best troubleshooting guide that I found, and also the one I've been using, is the ssh forwarding guide on github - https://help.github.com/articles/using-ssh-agent-forwarding I've checked all things there,

L.P.H. van Belle via samba writes: > Is samba-dsdb-modules installed ? Yes, I checked again, and all packages are installed, all of them with the proper version, and no leftovers. This server works fine for a half a day, and then these errors happen, so I think it's unlikely that it's related to the install itself. I have already made a backup of all tdb files with tdbbackup and

Hi, I've some trouble in getting samba internal DNS server in sync with others DNS (Windows) of my AD domain. samba_dnsupdate returns: update failed: REFUSED Failed update of 1 entries I'm running samba Version 4.5.12-Debian root at mysamba4dc:~# dpkg -l | grep samba ii  python-samba                   2:4.5.12+dfsg-2+deb9u3 amd64        Python bindings for Samba ii 

[please don't top post] On Fri, Apr 17, 2020 at 10:54:24 +0200, Andreas Thörn wrote: > I’ve tried that post .. but either I get a new scsi passthrough controller in device manager, but no dvd or the boot in windows hangs Note that you don't have to add a scsi <controller> if you already have one. You can add the drive to the existing one. > > Either that method won’t