similar to: dmesg shows Intel Virt., lsmod shows kvm_intel; "Host does not [have] virt. options"

On Tue, Jul 10, 2018 at 07:47:49AM -0600, Quincy Wofford wrote: > Hello, > > I've tried over at IRC and it appears the solution to this problem may not > be obvious. > > I'm working with a Centos7 box on HP ProLiant 380p hardware. The BIOS is a > bit outdated, but both Intel Virtualization Options and VT-d are present > and enabled in the firmware. > > Some

I'm attempting PCI-passthrough from host to guest on an HP ProLiant 380P, which has an outdated BIOS (2014), but it does support VT-d. I'm running CentOS 7, kernel 3.10.0-862.9.1.el7.x86_64. I have an Intel 82580 NIC installed with 4 ports. Each of these ports is in its own IOMMU group (I enabled SR-IOV at the BIOS, which might be the reason they show up separately) After detaching and

I updated a C5 system to 2.6.18-406.el5 (from 404) and the kvm_intel module doesn't load anymore: # dmesg |grep kvm kvm_intel: disagrees about version of symbol struct_module anyone seeing similarities? -- LF

On 21.03.19 18:12, Jerome Glisse wrote: > On Thu, Mar 21, 2019 at 04:59:14PM +0100, Tobias Klausmann wrote: >> Hi, >> >> just for your information and maybe for some help: with 5.1rc1 and SVM >> enabled i see the following backtrace [1] when the nouveau card (reverse >> prime) goes to sleep, for now i have papered over with [2] which leaves me >> with

I believe the solution is to not call drm_crtc_vblank_off for atomic modesetting in nouveau_display_fini. I think Ben's working on it. On Wed, Jul 19, 2017 at 1:25 PM, Tobias Klausmann <tobias.johannes.klausmann at mni.thm.de> wrote: > mimic the behavior of vblank_disable_fn(), another caller of > drm_vblank_disable_and_save(). > > This avoids oopsing, while trying to

Greetings, up until a year ago, I was running a server with Debian 10 (stable) on it with the latest versions of libvirt, qemu and kernel 4.19.x Debian 10 had to offer (both libvirt and qemu versions were really old). the network config was simple, one of the vm acted as a router and provided the ip for both the host and the vm. I've recently switched distro and now I'm running latest

On Sat, 2017-07-15 at 14:52 -0400, Ilia Mirkin wrote: > > OK, so this issue appears to be that we're calling > drm_crtc_vblank_off() on a crtc for which vblank is already disabled. > My guess is that this happens because the crtc is disabled. > > Not sure what the proper check is to see if vblanks are already disabled... Seems so, the below shut up suspend for both 8600 GT

Mh ok, paper over in nouveau_display_fini until Ben comes up with a better idea then?! Greetings, Tobias On 7/20/17 10:13 AM, Daniel Vetter wrote: > On Wed, Jul 19, 2017 at 04:10:50PM -0400, Ilia Mirkin wrote: >> I believe the solution is to not call drm_crtc_vblank_off for atomic >> modesetting in nouveau_display_fini. I think Ben's working on it. > Yes, the goal of

Hi, I wonder if someone can provide pointers on what might be wrong with my setup. I'm running a kvm host Fedora23 with rawhide kernel on top of a skylake cpu - Intel(R) Core(TM) i5-6260U CPU @ 1.80GHz (family: 0x6, model: 0x4e, stepping: 0x3) As part of an experiment, I have enabled Nested virt support on the host and created a fedora23 guest with virt-manager using host-passthrough as the

Hi everyone, I hope this is the correct list to discuss this issue; please feel free to redirect me otherwise. I have a nested virtualization setup that looks as follows: - Host: Ubuntu 16.04, kernel 4.4.0 (an OpenStack Nova compute node) - L0 guest: openSUSE Leap 42.3, kernel 4.4.104-39-default - Nested guest: SLES 12, kernel 3.12.28-4-default The nested guest is configured with

Hi All; Anyone knows if there is an Asterisk version that setup can be stored in Database instead of the configuration files (.conf)? Any advise? Regards Bilal

I have a Nvidia NVS310 installed in my Linux computer for a few years. It works well with the Nvidia driver, and not so well with the Linux nouveau driver. The Nvidia NVS310 has never worked well with Linux. In the beginning (many years ago) I decided to install Nvidia proprietary drivers, but every kernel upgrade would require an additional effort to have the driver working. That was enough

The message from this sender included one or more files which could not be scanned for virus detection; do not open these files unless you are certain of the sender's intent. ---------------------------------------------------------------------- Hi, I'm seeing the crash below on 6.1 and 6.2 kernels when trying to copy a directory to OCFS2 filesystem. The problem seems to be that

On 09/29/2020 10:07 PM, John Pierce wrote: > try the camera in a USB 2 port, it should work just fine at usb 2 speeds. > most systems, the USB 3 ports hve a 'blue' tongue, while the 2 ports are > black or another color. > > On Tue, Sep 29, 2020 at 6:50 PM H <agents at meddatainc.com> wrote: > >> On 09/29/2020 09:09 PM, John Pierce wrote: >>> do

Hi, just for your information and maybe for some help: with 5.1rc1 and SVM enabled i see the following backtrace [1] when the nouveau card (reverse prime) goes to sleep, for now i have papered over with [2] which leaves me with userspace hangs. Any pointers where to look for the actual culprit? PS: Card is: nouveau 0000:01:00.0: NVIDIA GP106 (136000a1) Greetings, Tobias [1]: BUG: unable

This series mainly solves a possible null-pointer dereference in virtio_transport_recv_listen() introduced with the multi-transport support [PATCH 1]. PATCH 2 adds a WARN_ON check for the same potential issue and a returned error in the virtio_transport_send_pkt_info() function to avoid crashing the kernel. Stefano Garzarella (2): vsock/virtio: fix null-pointer dereference in

Which configuration or rc script is responsible for loading the kvm modules on CentOS 5.4/5.5? They interfere with vmware. --------------------------------------------------------------- This message and any attachments may contain Cypress (or its subsidiaries) confidential information. If it has been received in error, please advise the sender and immediately delete this message.

Hello Does Samba work in an environment where there are multiple domains with 2-way trusts? Thanks Daniel K. Muturi 1776 Heritage Dr Quincy, MA 02171 Mail Stop: JABS Tel; (617)985-1725

On 07/27/2018 11:51 AM, Quincy Wofford wrote: > I'm attempting PCI-passthrough from host to guest on an HP ProLiant > 380P, which has an outdated BIOS (2014), but it does support VT-d. I'm > running CentOS 7, kernel 3.10.0-862.9.1.el7.x86_64. > > I have an Intel 82580 NIC installed with 4 ports. Each of these ports is > in its own IOMMU group (I enabled SR-IOV at the

When you create a new rails app the default home page says to rename routes.rb. I tried this, but when I run script/console or script/server I get an error saying the routes.rb file can''t be found. If you rename this file is there an environment variable holding the location elsewhere in the application? -- Posted via http://www.ruby-forum.com/.