Displaying 20 results from an estimated 9000 matches similar to: "Two Node Cluster"
2018 May 31
1
Re: Two Node Cluster
Hi Peter and other Libvirt-Users,
Thank you, I greatly appreciate your response. The diagram I provided may
be a little misleading, so I have attached a new diagram (also available
here: https://i.imgur.com/X3nFMCz.png ). I think I also need to provide
some more detail about my scenario here:
These physical nodes are provided to me by "bare-metal cloud" providers
like Scaleway / OVH /
2018 May 30
0
Re: Two Node Cluster
I have to say that I wouldn't do the networking that way - in fact, in the
clusters I manage, we haven't done the networking that way :-). Rather
than layer 3 routing between VMs, we've chosen to use layer 2 virtual
switching (yes, using openvswitch). We have the luxury of multiple 10G
NICs between our hosts, so we've separated out the management network from
the guest network,
2012 Feb 06
2
Puppet kick class option error
Hi,
I''m trying to puppet kick with class option.
Pupper Master: puppetmaster.example.com
Puppet Client1: host1.example.net
Puppet Client2: host2.example.net
But I get this error.
---
[root@puppetmaster ~]# puppet kick --class test --debug
test: host1.example.net.example.com, host2.example.net.example.com
Triggering host1.example.net.example.com,
host2.example.net.example.com
Host
2015 Mar 20
1
help with tinc unstable state
I am using tinc to connect together VPCs in AWS across multiple regions and
accounts to provide secure communication. For the most part, it works
great. A few times, I have seen issues where something got into an
unstable state that didn't seem to resolve itself. Shutting down tinc on
all hosts and restarting seemed to do the trick, but I'd like to see if
there is something that I can
2002 Feb 02
2
disabling the authentication agent?
Is there any way to disable the authentication agent globally? I'm not
quite sure I understand it's purpose. Here is some background info:
workstation: Key pair (dsa).
host1: No key pair. No authorized_keys.
host2: Has my workstation's key in authorized_keys.
I ssh to host1 from my workstation.
I ssh to host2 from host1. I am asked for a password. Good.
I ssh to host2 from my
2015 Apr 14
1
HBA enumeration and multipath configuration
# cat /etc/redhat-release
CentOS Linux release 7.1.1503 (Core)
# uname -r
3.10.0-123.20.1.el7.x86_64
Hi,
We use iSCSI over a 10G Ethernet Adapter and SRP over an Infiniband adapter to provide multipathing
to our storage:
# lspci | grep 10-Gigabit
81:00.0 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01)
81:00.1 Ethernet controller: Intel Corporation
2005 Oct 30
2
rsync when working on both sides...
Hi rsync devs and users,
I want to use rsync to synchronize home directories on two PCs. It works
fine if I start rsync after working on a host each time I leave. But
instead of operating modes "host1 -> host2" and "host2 -> host1" I would
like to have a mode "host1 <-> host2" to allow synchronizing at any time
-> Scenario:
- on host1 files A,B have
2019 Mar 28
2
NFSv4: Using fsid=0 but *not* exporting the root filesystem
Hi,
I would like to use the NFSv4 ability to create a "root" filesystem with
fsid=0, so that I don't have to refer to the whole path of the exported
filesystem when I mount it. However I do *not* want this root
filesystem to be mountable by any host. Is that possible and how?
E.g
Filesystem:
/exports/data1
/exports/data2
/exports/data3
/etc/exports:
/exports
2006 Sep 01
1
host type removing aliases
When using the host type in a manifest, aliases for hosts not managed by
puppet are removed.
# cat /etc/hosts
192.168.1.1 host1.example.com host1
# cat /tmp/host.pp
host {
"host2.example.com": ip => "192.168.1.2", alias => host2, ensure => present;
}
# puppet /tmp/host.pp
dnsdomainname: Unknown host
notice: //host=host2.example.com/ensure: created
# cat
2012 Aug 15
2
KVM VM traffic over host's Tinc VPN
Hello Tinc list!
I'm trying to set up a Tinc VPN between two KVM host machines so that a
VM on one host can communicate with a VM on the other host. While I do
have a good bit of experience with virtualization, I'm not a
particularly savvy network guy, so this is proving to be a pretty big
challenge.
Requirements:
* ALL VM network traffic must be secure.
* VMs on one host must be
2013 Mar 28
1
migrate qemu domains
Hi,
I tried to migrate qemu domains between same two Freescale PPC platforms.
1) Migrate test domain from Host1(10.193.20.109) to Host2(10.193.20.181).
root at ppc-host1:~# virsh migrate test qemu+tls://10.193.20.181/system
or
root at ppc-host2:~# virsh -c qemu+tls://10.193.20.109/system migrate test qemu:///system
I waited for a while and finally got error message as below:
error: Unable to
2020 Jun 03
7
Help with ssh -A, screen, ssh -a, detach, logout
Hi,
I've noticed some ssh behaviour that I wish didn't
happen. I was wondering if someone can explain how I
can stop it from happening, or explain why it's
unavoidable.
If I ssh-with-agent-forwarding from one host to a
second host, and on the second host use something like
nohup/screen/tmux/daemon, and from within that new
process session, start a long-running command via
2011 Dec 04
1
syncing imap servers with imapsync
hello list,
I am attempting to sync two imap servers using the imapsync perl script. It seems handy and easy.
Here's what happens when I try to do this:
#
# Postfix master process configuration file. For details on the format
# of the file, see the master(5) manual page (command: "man 5 master").
# -o smtpd_sasl_auth_enable=yes
# -o
2012 Nov 17
2
iSCSI Question
Hey everyone,
Is anybody aware of a /true/ active/active multi-head and multi-target
clustered iSCSI daemon?
IE:
Server 1:
Hostname: host1.test.com
IP Address: 10.0.0.1
Server 2:
Hostname: host2.test.com
IP Address: 10.0.0.2
Then they would utilize a CLVM disk between them, let's call that VG "disk"
and then directly map each LUN (1,2,3,4,etc) to LV's named 1,2,3,4,... and
2011 Dec 09
1
Samba 3.0, fuse-hdfs and write problems
Hi folks,
I research at the moment a connection over fuse and samba for
hadoop-cluster. Its my private playground, but I have some issues I can't
figure out why they happen.
I use RHEL5.7, packetlist:
rpm -qa|grep samba
samba-3.0.33-3.29.el5_7.4.x86_64
samba-common-3.0.33-3.29.el5_7.4.x86_64
2 servers, one provides samba-shares and one I use as client.
Samba-Server (HOST2):
FuseFS:
2008 Sep 04
1
rsync with --backup
Hello Guys,
i'm new to rsync.. and i have a request to fix some things(not
related to rsync)... and i could not find and good-for-me examples on
the net..
here is the deal: we have an ant-script.. that uses rsync to
update our server's files.. i.e. patch-script
and request is.. to save files, that are updated...
and when the patch-script is run again (like, the same one)
2001 Apr 04
1
Problem with bandwidth
Hi all,
Here is my setup: Host1 ---> Router ----> Host2
When i run ttcp -t on Host1 while ttcp -r in Host2, the bandwidth that i
can get is about 860 Kbytes/s, which is less than 7Mbps. But i am using NIC
10Mbps for all machines. Why is that so?
Currently, i am experimenting with the example efcbq. I am using MGEN (a
UDP traffic generator) to send 2 flows of traffic (EF and
2004 May 27
1
scp host1:file1 host2:file2 -> Permission denied??????
Hello,
I have a stupid problem with scp and I can't find where it comes from. I
am running 3 machines here with RedHat 7.3, RedHat 8 and RedHat 9. The 3
of them have openssh-3.7.1p2 (built from the SRPMS found on the openssh
web site).
I have though a problem to run a command of the type 'scp host1:file1
host2:file2' (my ssh being correctly setup):
[ted at papeete ~]$ scp
2011 Feb 09
1
LDAPS fault tolerance not working with dovecot
Hello list,
In my dovecot-ldap.ext I have:
uris = ldaps://host1 ldaps://host2 ldaps://host2
Today host1 hangs and new connections can't be established with mail server. Connected users worked fine (auth_cache_size = 5 k auth_cache_ttl = 15 mins). At this time - host2 and host3 are working fine, but switching to them was not happen. Why ?
In logs I got:
Feb 09 10:20:36 imap-login: Error:
2003 Oct 24
1
rsync -vae ssh user@host1:/tmp/dir user@host2:/tmp/
I have legitimate ssh access to two remote machines. ssh directly
from either machine to the other is blocked by firewalls which I cannot
control.
$ rsync -vae ssh user@host1:/tmp/dir user@host2:/tmp/
receiving file list ... done
rsync: mkdir user@host2:/tmp: No such file or directory
rsync error: error in file IO (code 11) at main.c(319)
I would like this to copy host1:/tmp/dir into