Displaying 20 results from an estimated 200 matches similar to: "Unable to connect VMs to a bridge over bonded network on Debian 9 (works fine on Centos 7.4)"
2003 Oct 31
0
Policy routing with IPTABLES MARK (please help me)
Hello,
I have a LINUX server with two internet connections available.
I want all the traffic to go over the default route, but HTTP traffic
to go over ISP2 line.
Interfaces:
eth1 192.168.2.254 - LAN 192.168.2.x
ppp0 x.x.x.106 - remote gateway x.x.x.6 - ISP1 (default route)
eth0 192.168.164.254 - remote gateway 192.168.164.113 - ISP2 (a
hardware router)
I have the following configuration:
echo
2012 May 11
0
segfault with libvirt-0.9.11.3-1
Hi, ALL
On fedora16 hosts with vdsm-4.9.6
after libvirtd daemon started in messages there are too many errors even if no one VM's running, and vdsmd not started
May 11 14:44:59 kvm02 kernel: [ 6670.207465] virsh[11015]: segfault at 38 ip 00007f047a52c535 sp 00007fffe3cb0e50 error 4 in libvirt.so.0.9.11[7f047a4bb000+2fd000]
May 11 14:44:59 kvm02 kernel: [ 6670.227244] virsh[11018]: segfault
2015 Apr 23
2
Probs with Routing (CentOS7 , KVM)
Hi there,
I've installed a new KVM-Server. The routing in all instances are only
working after "arp -s ip_of_router mac_of_router"
Server: CentOS7, KVM
Clients: CentOS6 and Fedora 21
What going wrong?
[root at bgstkvmlr01 ~]# ifconfig
bond0: flags=5187<UP,BROADCAST,RUNNING,MASTER,MULTICAST> mtu 1500
inet6 fe80::3ed9:2bff:fe0b:c706 prefixlen 64 scopeid
2007 Apr 18
3
[Bridge] Linux bridging code bounces back frames?
Hi,
I'm trying to build a bridge using a 486DX2/66 with two 10 Mbit Ethernet
NICs. The machine (tsushima) is running Debian stable and kernel 2.4.26.
Previously I used it as a router, so I know the hardware (NICs) is
working.
The NICs are as follows:
eth0: WD80x3 at 0x280, 00 00 C0 0A 2C 2F WD8003-old, IRQ 10, shared
memory at 0xd0000-0xd1fff.
eth16i.c: v0.35 01-Jul-1999 Mika Kuoppala
2017 Jun 10
1
Re: virt-customize issue/question
On Fri, Jun 09, 2017 at 08:07:57PM -0400, Richard Maloley II wrote:
> Richard,
>
> Hello - I am hoping that you can shed some light on an issue I am
> encountering. This could be due to my inexperience with KVM/Libvirtd
> and the associated tools.
>
> Scenario: I am writing a VM deployment script for my home lab. From
> my admin workstation I can connect to my KVM host and
2007 Dec 12
1
Tearing my hair out:
I have a samba 2.2.8a PDC, no windows servers at all.
The local network works. Conan, the PDC also acts as a WINS
server. Postie, the DHCP server sets:
option netbios-name-servers 192.168.1.241 ;
option netbios-node-type 2 ;
All clients have lmhosts file with:
192.168.1.241 conan #pre #dom:sjsa
192.168.1.242 postie #pre
Last week I needed to reinstall a computer, named pixel
On server
2011 Sep 14
2
Slaves under Squeeze
hi,
I recently upgraded my Debian Lenny system to Squeeze, and have
been happily running nut as a MODE=standalone system talking to my
Cyberpower 1500 avr lcd via the usbhid-ups driver for a couple of weeks
or so. No problems.
Now I'm trying to hang another machine off the same ups as a slave,
and it isn't working. The problem I'm getting is best illustrated by
what
2010 Jul 12
4
Remote-Party-ID party=called
Hello list,
using Asterisk 1.4.30.
I want to set the SIP-header Remote-Party-ID to display the name of the
calling party on my phone in stead of the number.
This is the dialplan :
exten => 10,1,NoOp()
exten => 10,n,SIPAddHeader(Remote-Party-ID: "eric"
<sip:10 at 192.168.1.150>;party=called )
exten => 10,n,Dial(SIP/test2)
This is what the CLI shows :
/[Jul 12
2010 Mar 04
1
PXELINUX output 3.85 vs. 4.00
PXELINUX 3.85 pre13-1-gee43a6e* Copyright (C) 1994-2010 H. Peter Anvin et al
!PXE entry point found (we hope) at 9F00:0680 via plan A
UNDI code segment at 9F00 len 0AB0
UNDI data segment at 9E00 len 1000
Getting cached packet 01 02 03
My IP address seems to be C0A80168 192.168.1.104
ip=192.168.1.104:192.168.1.99:192.168.1.1:255.255.255.0
TFTP prefix:
Trying to load:
2014 Oct 07
1
Grandstream GXP2160 + SRTP
Hello,
I am trying to setup a Grandstream GXP2160 IP-phone with secure calling
(SRTP).
Secure signaling SSIP for registration is working great !
I follow this guide :
https://wiki.asterisk.org/wiki/display/AST/Secure+Calling+Tutorial
But when I try to make a call with SRTP, I get stuck. There is an
initial INVITE which is anwered with a 401. There should follow a new
INVITE with a nonce,
2007 Sep 25
1
Weird disconnection problems
Hi
I'm running Samba 3.0.24 both on a Debian etch and a Ubuntu 7.04 both as
PDC's and I'm experiencing some really strange disconnection issues.
i have net mapped a share to p: and after doing som copying of files all
of a sudden it says that the p: drive and i can't acess it for a couple
of seconds and then it shows up again.
Browsing through the logs i can't really find
2020 Aug 17
1
getent passwd blank response
Hai Bob,
Try this.
First flush cache.
net cache flush
getent passwd username
id username
And run this one again for me:
https://raw.githubusercontent.com/thctlo/samba4/master/samba-collect-debug-info.sh
Reply might be bit later on, im running around here.
Greetz,
Louis
> -----Oorspronkelijk bericht-----
> Van: samba [mailto:samba-bounces at lists.samba.org] Namens Bob
2012 Feb 09
4
Create Virtual Machine via HTTP or FTP
Hi,
I'm trying to create a Virtual Machine using Network Install mode (I
tried HTTP and FTP).
The HTTP/FTP server where the installation files are located is the Host
Machine.
The URL that I'm using is: http://192.168.1.104/inst and the Automatic
detect option detects the OS without problem.
When the installation starts I got an error:
Unable to retrieve
2009 Sep 21
0
received packet with own address as source address
Hi,
we''re running 4 xen servers on our network with multiple network cards.
During HighLoad we experince degeneration of inbound network traffic
through our loadbalancer. I might found a reason for it, in Dom0 dmesg
output looks as follows:
[1157421.975910] eth0: received packet with own address as source address
[1157421.975957] eth0: received packet with own address as source
2009 Jul 05
9
Xen Networking and bonded interfaces on Debia Lenny
Greetings all. This has been an ongoing issue for me for a few months, and I''ve been trying to get an answer.
My server has two NICs, and I want to set up the following:
NICs (x2) -> bond (mode 5) -> Xen Bridge -> Doms
...however, trying to configure this doesn''t seem to work: network-bridge steals eth0 instead of bond0, which breaks the bond AND my networking. The
2006 Aug 23
2
Error was Permission denied
Greetings,
I have tried a few days on an off to get samba to work, but need some help.
Samba version Samba 3.0.23a-1.FC5.1
Linux Fedora 5 (localhost) User: dsmith 192.168.1.104
Windows XP SP2 with lastest updates (T2385) User: dan 192.168.1.100
Linksys 8 port router
I found a couple problems with the checklist and fixed them. A
couple problems I wasn't able to solve.
Here are the
2018 Aug 18
2
Bridging local physical interface to tinc
I can’t seem to find info about layer 2 tinc tap interface bridge with local physical nic.
I have successfully created two nodes configuration with tinc acting as switch.
My problem is ethernet packets only flow between two nodes and not to hosts on bridged nic.
Example:
Server 1 - eth0 bridged with tinc tap device, then bridge gets IP via dhcp server on physical nic subnet.
Server 2 - local
2007 Mar 07
1
sip show channels
Behavior on Asterisk 1.2.12, 1.2.15, 1.2.16
"sip show channels"
Always tends to show 100+ lines such as
192.168.1.241 (None) 2e2872da-1d 00101/21507 unkn No
Rx: REGISTER
Never seem to go away
198 total peers on this server
All devices are behind NAT
Registration expirations between 30secs to 2 minutes to help keep NAT
open
Should I extend the
2003 Apr 11
0
nobody owned smbd processes are not ending
I am running the latest release of Samba on RH8 (2.2.7-5.8.0). I use it
primarily to provide master browse functionality, and to act as a print
server (using CUPS 1.1.17-0.2).
I am watching a TOP session, after printing from a W2K workstation. (I
restarted Samba before I did this). There is now one smbd processed
owned by nobody, which is not ending (and the print has completed). In
my
2010 Feb 03
0
permissions on Samba share mount point in RHEL 5
Dear friends,
I am straight away coming to the point I have a samba
server<http://www.linuxforums.org/forum/#>and I have created a public
share (with full permissions for every user in
network) and I have mounted it on a RHEL machine. The problem is that
permissions on the mount change when I restart the samba server and other
thing is that when any user on rhel machine creates any folder