similar to: Virsh Domain - Serial port; what does the attribute “port” of the serial node's child “target” do?

Hi All. I'm trying to setup a guest within my hypervisor that acts as a Console Server, using 10 USB to Serial adapters. The Host is all setup and can access each Serial Port without problems. I have attempted to add the Serial Connections to a Guest, using both Virtual Machine Manager and by editing the .XML file, and I can add up to 4 Serial devices (Including one for console access to the

guys, A bit off topic here, but since this issue already has a history here: serial connection to the SCD, the never ending story ... - the intel D945GSEJT mainboard (ICH7) has two serial ports with onboard connectors which require a ribon cable to the external DB9 connectors in the case. I tested 5 cables, but none works. whereas I'm not sure if it is a cable problem. this is what dmesg

I am in the process of migrating from running CentOS 4.8 (32-bit) to CentOS 5.4 (64-bit) on my AMD Sempron(tm) Processor LE-1300 system (it is running CentOS 4.8 32-bit because the disk images are from a previous PIII system), and things are 'interesting' WRT how the Lava Computer mfg Inc Quattro-PCI card is being handled. lspci (on CentOS 4.8 32-bit) yields: 01:0a.0 Serial controller:

I have been struggling with setting up two serial ports on an HP/Compaq D512S (Intel P4) under CentOS-5. I am not at all sure why these things were not auto-configured when I initially installed the CentOS system from CDs but they were not. I have found various resources on the web and from them uncovered the setserial utility. What I need from somebody is guidance on how to use this utility to

Hi,. I have some legacy applications for MSDOS / 95 and a new NT version of an application that i would like to use. I have un-commented the lines in wine.conf about serial access but i cant seem to get any MSDOS or win32 application to talk, is this currently supported in (the lateset) wine ? regards --- Matthew J Fletcher NPD Firmware When did ignorance become a point of view ? ---

On 01/28/18 20:15, Fred Smith wrote: > On Sun, Jan 28, 2018 at 12:10:29PM -0500, Pete Geenhuizen wrote: >> I'm upgrading from CentOS6 to CentOS 7. >> >> I run 2 weather stations on C6 and have one of them attached to >> ttyS0 which is on the motherboard, and the other to ttyS2 which in >> on an add-on PCI serial card. >> >> I'm migrating the

The vm host shows this: # setserial -g /dev/ttyS* /dev/ttyS0, UART: 16550A, Port: 0x03f8, IRQ: 4 /dev/ttyS1, UART: 16950/954, Port: 0xd040, IRQ: 17 /dev/ttyS2, UART: 16950/954, Port: 0xd048, IRQ: 17 /dev/ttyS3, UART: 16950/954, Port: 0xd050, IRQ: 17 # # ll /dev/ttyS* crw-rw----. 1 root dialout 4, 64 Nov 10 12:18 /dev/ttyS0 crw-rw----. 1 root dialout 4, 65 Nov 10 12:18 /dev/ttyS1 crw-rw----. 1

On 11/17/2013 09:18 PM, Matthew Harrold wrote: > On Sun, Nov 17, 2013 at 7:44 PM, Cole Robinson <crobinso@redhat.com > <mailto:crobinso@redhat.com>> wrote: > On 11/17/2013 01:26 PM, Matthew Harrold wrote: > > Hi All. > > > > I'm trying to setup a guest within my hypervisor that acts as a Console > > Server, using 10 USB

Hi I would like to know if it's possible to define serial port speed using libvirt. I'm trying to connect the guest with the host for communication. Usually only small messages are transferred, but i might need to transfer huge files, so i would like to know if i can use SerialPort interface to do that. Thanks anyway, Marco Dinis

Hi, For some time now I have been using pxelinux to add a helpful 'administrator' boot mode to our workstations with the following 'pxelinux.cfg/default' config: ---- DEFAULT local PROMPT 0 TIMEOUT 0 TOTALTIMEOUT 1 ONTIMEOUT menu ALLOWOPTIONS 0 NOESCAPE 0 LABEL local LOCALBOOT 0 LABEL menu CONFIG /pxelinux.cfg/default-menu ---- This is great as by

I'm upgrading from CentOS6 to CentOS 7. I run 2 weather stations on C6 and have one of them attached to ttyS0 which is on the motherboard, and the other to ttyS2 which in on an add-on PCI serial card. I'm migrating the weather stations another host running C7 which has a similar hardware configuration.? When I connect the weather station to ttyS0 everything works fine, but when I try

On Mon, Jan 29, 2018 at 07:00:02AM -0500, Pete Geenhuizen wrote: > > > On 01/28/18 20:15, Fred Smith wrote: > >On Sun, Jan 28, 2018 at 12:10:29PM -0500, Pete Geenhuizen wrote: > >>I'm upgrading from CentOS6 to CentOS 7. > >> > >>I run 2 weather stations on C6 and have one of them attached to > >>ttyS0 which is on the motherboard, and the

I''ve actually found a way to make EventMachine listen to events from a serial port, but only by using the pure Ruby version, using Guilliame Pierronnet''s Ruby/SerialPort library. It turned out to be simpler than I thought it would be: require ''serialport'' $eventmachine_library = :pure_ruby require ''eventmachine'' module EventMachine class

Hello, I've got an ISDN PRI circuit terminating in a Cisco AS5350, which in turn is talking to an Asterisk server via SIP for call origination and termination. Seems simple enough, and it works for the most part, but: 1) Caller ID name data comes in on the PRI, but doesn't appear to get handed off to the Asterisk server via SIP, at least not in any format that Asterisk

I would think I could do this but for some reason I am stymied. I have a PRI from RCN connected to a cisco 3640 (in my day "cisco" is all lower case :-)). My config looks something like this on the cisco... --------------------------------------------------------- voice-card 3 dsp services dspfarm ! ip cef ! isdn switch-type primary-5ess ! controller T1 3/0 framing esf linecode

Hello, in my syslx64.cfg I have the line "serial 0 115200 0" But if I show the variable SerialPort, than the variable is zero. We have a own c32 file. And with this I show (printf) the variable. -------- our cfg file ------------------------ # # EFI64 configuration # PATH x64 # Include does not work corret in this version # INCLDUE /COMMON/common.cfg CONSOLE 1 serial 0 115200 0 #

CentOS-6.2 We have a dedicated CentOS-5.7 host used for fax reception and transmission that we wish to move to a CentOS-6.2 virtual guest instance. The CentOS-6.2 virtual host has a 4-port serial card installed. lspci -v tshows this this: 03:00.0 Serial controller: Oxford Semiconductor Ltd OX16PCI954 (Quad 16950 UART) function 0 (Uart) (prog-if 06 [16950]) Subsystem: Oxford

Running Centos5 server software. Running ALL software except virtualization and server cluster. Patched this server software via yum updates as of 9.24.2007 Downloaded the webcam software for FC7 from: http://koji.fedoraproject.org/koji/buildinfo?buildID=10106 Zoneminder-1.22.3-6.fc7.i386.rpm When YUM tried to install this version of Zondminder, finds this 1 missing dependency: Missing

For all who are interested: A quick review of CeBIT 2005. :-) CeBIT was a very successfull event. Most of the time, the asterisk-booth was crowded with more people than we could talk to. We had with us a demo-installation including different IP-phones, digital and analog phones as well as a Siemens HiPATH PBX to which our Asterisk-server served as a VoIP-gateway, and many people were impressed

Hi, I have problems to save printer settings like changing the size from letter to A4. This happens for user settings and default printer settings. The settings are always resetted to default values like "letter". The system uses samba 3.4.11, I also did some tests with samba 3.5.8, but nothing changed. After downgrading to 3.3.2 everything worked as expected. I didn't change any