similar to: double nat - common setup

On 12/21/2015 10:46 AM, lejeczek wrote: > hi everybody > > my mind must have gone blank & eyes blind, I'm hoping it's simple and > somebody can shed the light on bit I cannot see. > > a regular default net: > <network> > <name>default</name> > <uuid>4c0a0c44-7e8a-493b-a57c-87cd38eaa0f7</uuid> > <forward

Is it possible to allow your Liunx box "see" your winbox, just like the winbox can "see" or browse the Linux box with Samba?

I've looked through all the doc and searched the list archives, but I just can't seem to get it to work. I have a Linux box with 5 ethernet interfaces, 3 of which have winboxes I'd like to include in my little Samba network. I'm able to get it far enough for each winbox to see the linbox, but they can't see each other. Here's my setup: Winboxes Linbox Win2k -

This winbox application is one that I use to manage routers for myself and my customers, so it is unlikely that there are many others trying to use it. I have used this program (through several versions of the program itself) on my Fedora laptop from FC8 all the way to Fedora 14. I don't know what wine versions that spans, but it's over 5 years and it has worked flawlessly. When I first

Here's my document reference point: http://samba.org/samba/docs/man/Samba-HOWTO-Collection/domain-member.html#machine-trust-accounts I've had some moderate success setting up this Samba network. But, it's failing at adding a Windows XP Pro machine to the trusted machine list, or it's disallowing it to log in. This explanation is as complete as I can make it, so it will be

Hi folks - I'm having an issue here. I have my samba server sitting on one subnet, and the rest of the clients sitting on another (due to IP administration reasons). I assign both my clients and the server to the same workgroup, but the winboxen clients can't browse to the samba server. The win clients all have WINS resolution turned on, and I specified all of my WINS servers in

Hi I running a rsync server using version 2.6.3pre1 in a Solaris 10 server. When I try to use ssh to encrypt my data, the rsync client fails with this message: rsync -avz -e ssh winbox.exe zone43@zone43.gridzones.com::backups Password: rsync: connection unexpectedly closed (0 bytes received so far) [sender] rsync error: error in rsync protocol data stream (code 12) at io.c(434) My config

Hello all, This my first mail in this list. We have succesfully setup a samba server at our 1st attempt, next we go in another site and try the same things but now it seems we got it all wrong! The facts: we have a linuxbox (named enlogic) (REdHat 7, kernel 2.2.18, samba 2.0.7)and one winbox win98se (named ndemou). Our workgroup is localenlogic. No other PC (not even a Hub because we've

Hi, I've been following a similar and current thread about name resolution from LINUX side. I have exactly the opposite problem (running ubuntu 7.10 on a network with a mixture ubuntu 6.06, WinXP and WinVista boxes) The winboxes cannot see or mount this 7.10 box I can mount WinPC shares on this 7.10 box. I was wondering about firewalls, but I can ping this 7.10 from the WinBox by IP address

I'm trying to set up mounting of a Windows share for non-root users via /etc/fstab on a CentOS 4.6 box - I've followed the instructions at: <http://wiki.centos.org/TipsAndTricks/WindowsShares> Using something like the /etc/fstab example given in the wiki page (with, of course, using a valid share, username and password for my set up): //winbox/getme /mnt/win cifs

I want to replace a custom PBX, that is infront on a IVR system based on OLD NMS AG-E1 Card. The Cards is configurated with CAS Digitalmode, someone can give me some info about Digim Cards CAS configuration i need a conversion Table? I wanto to don't touch configuration on winbox, i want only replace HWPBX box with asterisk. Diagram Telco E1 ===>Proprietary PBX========(CAS)===>IVR

Il 08/01/14 16:17, Laine Stump ha scritto: > On 01/08/2014 01:43 PM, ZeroUno wrote: >> Also, regarding the "iptables restart problem" described in the last >> paragraph at <http://libvirt.org/firewall.html>, is there really no >> acceptable way to make libvirt add its rules back automatically upon >> iptables/network restart? > > Take a look at

Dear all, I recently upgraded to Samba 2.0.3 and read the doc files about NT machines because I cannot connect to the Samba server. In the WinNT.txt file there is the following proposal: [ --- Start of pasted text --- ] The following registry entry change will re-enable clear text password handling: Run regedt32.exe and locate the hive key entry:

hi, have changed a ethercard, because the oldone was defect. Now I got a realtec8139 and would install it into my winbox98, but have a lot of troubles. the driver rtl8139.sys seems to be defect or has something trouble, win98 tells me, the driver couldn't be installed. Have downloaded again the drivers for rtl8139, but the same problem appears. Is anybody there, who could help here ? the

Is it possible to allow two Linux computers to browse each other in a manner similar to the way a winbox and browse a Linux box with Samba? Ya know, like the network neighborhood thing, not the smbclient get put thing? Thanks

okay.. i'm on my winbox, looking at stuff. connecting to my samba server works fine.. browsing through files and access is fine, but when i try to print, it doesn't work at all. it recognizes the printer, the printer type and such, but it just doesn't print. [printers] comment = All Printers path = /tmp printing = /usr/local/bin/lpr print ok = Yes

Hi people. I have been working with samba+ldap = PDC in my test netwwork. I had follow the good tutorial: Samba By Example, chapter 5, I had done all the test the book say and no issues. I have 2 issues: 1; I cannot see my domain at my windows browser. 2; I cannot add my windows xp pro to my domain. I have been trying to see if I could find the solution but nothing yet, there is the

I have some questions regarding the way that networking is handled via qemu/kvm+libvirt -- my apologies in advance if this is not the proper mailing list for such a question. I am trying to determine how exactly I can manipulate traffic from a _guest's_ NIC using iptables on the _host_. On the host, there is a bridged virtual NIC that corresponds to the guest's NIC. That interface

Hi folks, After some more trial and error, I was able to get a bit further in the game with the permission issues I had (previous message was titled 'Samba permissions...) Now I'm able to get onto the system, browse and read/copy/delete files off of the shares. What I can't do is put stuff on because I get a locking error. The setup is as follows: Server 1 -->

Hi. I have mounted a Windows 2000 Pro computer under linux using: mount -t smbfs -o username=phill,password=xxxxx //winbox/drivec /mnt/winbox I can then jump into /mnt/winbox/ and navigate around the Win 2000 box. But... For some reason some of the files and directories on the windows computer are not showing up. For example, I have just moved a heap of wav files for our audio-processing